1. Product Overview
The ROMAN PRO-999 Rx-35 Problem Solving Primer is formulated to prepare various porous surfaces for subsequent treatments such as painting or wallpaper application. It effectively seals torn drywall, skim coats, spackling, mud joints, and residual wallpaper paste, creating a stable and receptive surface. This primer is also suitable for challenging surfaces like textured walls and popcorn ceilings. It dries with a clear-matte, tacky finish, which enhances the adhesion of wallcoverings.
Image 1.1: A 5-gallon pail of ROMAN PRO-999 Rx-35 Sealer/Primer, illustrating the product packaging.
Key Features:
- Ideal Drywall Primer: Excellent for priming torn or bare drywall and other porous surfaces.
- Seals and Primes: Dries tacky to lock down joint compound, spackling, and skim coats. Effective on popcorn ceilings and lightly textured surfaces.
- Easy to Use: Water-based formula with low odor, no splatter, and easy cleanup with water.
- Durable: Formulated to dry with a clear matte finish and slight residual tack, providing durable coverage.
- Premium Quality: Non-toxic, easy to apply, protects wall surfaces, and prevents running or spattering during application.
2. Safety Information
Always read and follow all instructions and safety precautions on the product label before use. Ensure adequate ventilation during application. Wear appropriate personal protective equipment, including gloves and eye protection. Keep out of reach of children and pets. Avoid contact with eyes and skin. In case of contact, flush immediately with water. If irritation persists, seek medical attention.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Setup and Surface Preparation
Proper surface preparation is crucial for optimal performance of ROMAN PRO-999 Rx-35 Sealer/Primer.
Required Tools and Materials:
- ROMAN PRO-999 Rx-35 Sealer/Primer
- Paint roller, brush, or sprayer
- Paint tray
- Drop cloths or plastic sheeting
- Painter's tape
- Cleaning supplies (rags, water)
- Personal Protective Equipment (gloves, eye protection)
Surface Preparation Steps:
- Clean the Surface: Ensure the surface is clean, dry, and free from dust, dirt, grease, and loose debris.
- Repair Damage: Fill any holes or cracks with appropriate patching compound. Allow to dry and sand smooth.
- Address Torn Drywall: For torn drywall, ensure all loose paper is removed. The primer will seal the remaining brown paper.
- Remove Wallpaper Residue: Scrape off as much old wallpaper paste residue as possible. The primer will help seal any remaining stubborn residue.
- Protect Adjacent Areas: Use drop cloths and painter's tape to protect floors, trim, and other areas not intended for priming.
Image 3.1: Hands peeling torn drywall paper, demonstrating the type of surface damage this primer is designed to seal.
Image 3.2: A paint roller applying primer to a bare drywall surface, showing the initial application process.
4. Operating (Application) Instructions
ROMAN PRO-999 Rx-35 is water-based and low odor, making it easy to apply.
Image 4.1: Pouring the water-based, low-odor primer into a paint tray, ready for application.
Application Steps:
- Stir Thoroughly: Before use, stir the primer thoroughly to ensure a consistent mixture.
- Apply Evenly: Apply a uniform coat of primer using a roller, brush, or sprayer. Avoid over-application, which can lead to drips or uneven drying.
- Coverage: The primer covers approximately 350-450 square feet per gallon, depending on the porosity and texture of the surface. A 5-gallon pail covers approximately 2,000 square feet.
- Drying Time: Allow the primer to dry for approximately 3-4 hours before applying paint or hanging wallcoverings. Full cure time is 4 hours. The primer will dry with a clear-matte, tacky finish.
- Specific Applications:
- Torn Drywall: Apply directly over torn drywall to seal the exposed paper.
- Skim Coats/Joint Compound: Apply over dried skim coats or joint compound to ensure proper adhesion for subsequent layers.
- Residual Wallpaper Paste: Apply over cleaned surfaces with residual paste to seal and prepare for new wallcoverings.
- Popcorn Ceilings/Textured Walls: The primer's formulation helps prepare these surfaces for a smoother finish or better adhesion.
Image 4.2: Application of primer over a surface with residual wallpaper paste, ensuring proper sealing.
Image 4.3: The primer is effective when applied over joint compound, preparing the surface for finishing.
Image 4.4: The primer is suitable for sealing and priming textured surfaces like popcorn ceilings.
5. Maintenance and Storage
Cleanup:
Clean tools and equipment immediately after use with warm water and soap. Dried primer may require stronger cleaning agents or mechanical removal.
Storage:
Store the product upright in its original sealed container in a cool, dry place. Protect from freezing. Freezing may damage the product and render it unusable. Ensure the lid is tightly sealed to prevent drying out.
6. Troubleshooting
- Problem: Primer not adhering properly.
Solution: Ensure the surface was thoroughly cleaned and dry before application. Remove any loose debris, dust, or grease. Allow adequate drying time for previous repairs (e.g., patching compound). - Problem: Uneven finish or streaks.
Solution: Apply the primer in thin, even coats. Avoid over-application. Ensure your roller or brush is fully saturated but not dripping. Stir the primer thoroughly before and during use. - Problem: Primer appears too thick or difficult to apply.
Solution: Ensure the product has been stored correctly and not exposed to freezing temperatures. Do not thin the product unless specifically instructed by the manufacturer. - Problem: Bubbling or blistering after application.
Solution: This can occur if the surface is not completely dry or if there is trapped moisture. Ensure the surface is fully dry and free of contaminants. For torn drywall, ensure all loose paper is removed and the surface is sealed properly.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Roman |
| Model Name | PRO-999 |
| Color | Clear |
| Finish Type | Flatt / Matte |
| Item Volume | 5 Gallons (640 Fluid Ounces) |
| Paint Type | Acrylic |
| Specific Uses | Sealing and priming porous surfaces like torn drywall, wallpaper paste, and joint compound |
| Indoor/Outdoor Usage | Indoor |
| Item Form | Liquid |
| Full Cure Time | 4 Hours |
| Coverage | Approx. 350-450 sq ft per gallon (2,000 sq ft per 5-gallon pail) |
| Water Resistance Level | Water Resistant |
| Item Weight | 44.7 pounds |
| Product Dimensions | 12.38 x 12.38 x 15.25 inches |
| UPC | 017104169052 |
| Manufacturer | Roman Decorating Products |
8. Warranty Information
The ROMAN PRO-999 Rx-35 Sealer/Primer comes with a 1 Year Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official product packaging or contact Roman Decorating Products directly.
9. Support and Contact
For further assistance, technical support, or inquiries regarding the ROMAN PRO-999 Rx-35 Sealer/Primer, please contact Roman Decorating Products. Visit their official website or refer to the contact information provided on the product label for the most up-to-date support options.
Image 9.1: The official logo for Roman, 'The No. 1 Contractor Brand'.
