Product Overview
The Energizer Weatheready Waterproof LED AA Flashlight is a durable and reliable handheld light source designed for various situations. Its construction allows it to float on water for easy retrieval and features a reflective surface for enhanced visibility in low-light conditions. This flashlight provides bright, white LED illumination and operates efficiently on standard AA batteries.
Figure 1: Energizer Weatheready Waterproof LED AA Flashlight in its retail packaging, highlighting its waterproof and floating features.
Key Features
- Durable and Water Resistant: Provides bright, white LED light in any situation.
- Floats for Easy Recovery: Designed to float, making it easy to find if dropped in water.
- Reflective Surface: Enhances visibility in low light conditions.
- Long-Lasting Operation: Operates for up to 35 hours on a single set of alkaline batteries.
- Includes Batteries: Comes with two AA Energizer MAX batteries.
Setup: Battery Installation
The flashlight requires two AA batteries for operation. The product typically includes these batteries, but they may have a protective sticker to prevent depletion during storage. Follow these steps to install or replace batteries:
- Unscrew the head of the flashlight counter-clockwise to open the battery compartment.
- If new, remove any protective sticker from the battery terminals.
- Insert two AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Screw the head back onto the flashlight clockwise until securely tightened.
Figure 2: Front view of the flashlight, showing the LED bulb. The head unscrews for battery access.
Figure 3: Bottom view of the flashlight, showing the base and reflective surface.
Video 1: An overview of the Energizer Waterproof LED AA Floating Flashlight, demonstrating its features and battery installation process.
Operating Instructions
The flashlight features a simple push-button switch for operation.
- To turn the flashlight ON, press the power button located on the side of the flashlight.
- To turn the flashlight OFF, press the power button again.
Figure 4: Side view of the flashlight, highlighting the easy-to-use push-button power switch.
Maintenance
- Cleaning: Wipe the flashlight with a damp cloth as needed. Do not use abrasive cleaners.
- Battery Care: Remove batteries if the flashlight will not be used for an extended period to prevent leakage and damage.
- Storage: Store in a cool, dry place away from direct sunlight.
Troubleshooting
- Light does not turn on:
- Check if batteries are inserted with correct polarity.
- Ensure the battery compartment is fully tightened.
- Replace old batteries with new ones.
- Verify that any protective sticker on new batteries has been removed.
Video 2: A demonstration of the flashlight's functionality and how to ensure proper battery connection by removing the protective sticker.
Specifications
| Feature | Detail |
|---|---|
| Brand | Energizer |
| Model Name | Weatheready flashlight |
| Model Number | 039800112514 |
| Light Source Type | LED |
| Brightness | 55 Lumens |
| Power Source | Battery Powered |
| Battery Type | 2 AA Alkaline batteries |
| Run Time | Up to 35 hours |
| Water Resistance Level | Waterproof |
| Material | Plastic |
| Color | Multicolor (Red) |
| Item Weight | 0.32 Pounds |
| Product Dimensions | 3"D x 3"W x 13"H |
| Manufacturer | Energizer Battery Company, inc. |
Safety Information
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Do not dispose of batteries in fire; they may explode or leak.
- Always replace all batteries at the same time.
- Keep out of reach of small children.
Warranty and Support
For warranty information, technical support, or to inquire about replacement parts, please refer to the product packaging or visit the official Energizer website. You may also contact Energizer customer service directly for assistance.
Official Energizer Website: www.energizer.com
