Casio LTP-1314D-2AVDF

Casio LTP-1314D-2AVDF Quartz Watch User Manual

Model: LTP-1314D-2AVDF

1. Introduction

This manual provides essential instructions for the proper use and care of your Casio LTP-1314D-2AVDF Quartz Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. This watch features a reliable quartz movement, an analog display, and a durable stainless steel bracelet.

2. Initial Setup

2.1 Setting the Time

  1. Pull the crown (the knob on the side of the watch) out to the second click.
  2. Rotate the crown to move the hands and set the correct time.
  3. Push the crown back in to its normal position to start the watch.

2.2 Setting the Date

  1. Pull the crown out to the first click.
  2. Rotate the crown to adjust the date.
  3. Push the crown back in to its normal position.

Note: Avoid setting the date between 9:00 PM and 1:00 AM, as this may interfere with the automatic date change mechanism.

2.3 Adjusting the Bracelet

The stainless steel bracelet may require adjustment to fit your wrist comfortably. It is recommended to have this adjustment performed by a qualified jeweler or watch technician to prevent damage to the bracelet or watch.

Side view of the Casio LTP-1314D-2AVDF watch, showing the crown for time and date adjustment.
Side view of the watch, highlighting the crown for adjustments.

3. Operating the Watch

3.1 Basic Timekeeping

Your Casio LTP-1314D-2AVDF watch displays hours, minutes, and seconds using three hands on an analog dial. The watch operates continuously once the time is set and the crown is pushed in.

3.2 Date Display

The watch features a date window, typically located at the 3 o'clock position, which displays the current day of the month. The date will automatically advance once every 24 hours.

3.3 Water Resistance

This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands. It is not suitable for diving, snorkeling, or prolonged water exposure. Always ensure the crown is fully pushed in before any contact with water.

Front view of the Casio LTP-1314D-2AVDF watch with a blue dial and silver-tone stainless steel bracelet.
Front view of the Casio LTP-1314D-2AVDF watch.

4. Maintenance

4.1 Cleaning Your Watch

Wipe the watch case and band with a soft, dry cloth. For stainless steel bands, a mild soap solution and a soft brush can be used, followed by thorough rinsing and drying. Avoid using harsh chemicals or abrasive materials.

4.2 Battery Replacement

The watch is powered by one LR41 battery. When the watch stops or the hands move erratically, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

4.3 Water Resistance Precautions

  • Do not operate the crown while the watch is wet or submerged in water.
  • Avoid exposing the watch to extreme temperature changes.
  • If water or condensation appears inside the watch, have it inspected immediately by a professional.
Back view of the Casio LTP-1314D-2AVDF watch, showing the stainless steel case back and water resistance markings.
Case back of the watch, indicating water resistance.

5. Troubleshooting

  • Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
  • Incorrect time/date: Refer to Section 2.1 and 2.2 to reset the time and date.
  • Condensation inside the watch: This indicates a potential issue with the watch's seal. Seek professional service immediately to prevent further damage.

6. Specifications

FeatureDetail
Model NumberLTP-1314D-2AVDF
Display TypeAnalog
Movement TypeQuartz
Case MaterialStainless Steel
Band MaterialStainless Steel
Water Resistance Depth50 Meters (5 ATM)
Case Diameter33.1 Millimeters
Case Thickness9 Millimeters
Band Width18 Millimeters
Band Length22 Centimeters
Crystal TypeMineral
Battery TypeLR41 (included)
Item Weight73 Grams

7. Warranty Information

Your Casio watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Casio website for detailed information.

8. Customer Support

For further assistance, technical support, or service inquiries regarding your Casio LTP-1314D-2AVDF watch, please contact Casio customer service. Contact details can typically be found on the official Casio website or in the documentation provided with your watch.

Related Documents - LTP-1314D-2AVDF

PreviewCasio LAW-21 Модуль 2789: Руководство пользователя и характеристики
Полное руководство пользователя для часов Casio LAW-21 (Модуль 2789). Содержит инструкции по эксплуатации, уходу, описания режимов работы (текущее время, мировое время, таймер, секундомер, будильник) и технические характеристики.
PreviewРуководство пользователя часов CASIO BEM-304 (Модуль 5086)
Подробное руководство пользователя для часов CASIO BEM-304, включая информацию о водостойкости, настройке времени и даты, уходе за часами, технические характеристики и информацию о производителе.
PreviewCasio EFA-124 Watch User Manual
User manual for the Casio EFA-124 watch, module 4398. Provides instructions on setting time, using world time, stopwatch, alarm, and care instructions.
PreviewCASIO Module 1320 User Manual - Digital Analog Watch Guide
Comprehensive user manual for the CASIO Module 1320 watch, covering technical specifications, features, operation, water resistance, and care instructions. Learn how to set time, calendar, alarms, and use the stopwatch.
PreviewCASIO 3502 Watch User Manual
Comprehensive user manual for CASIO watches, model 3502. Learn about water resistance, setting time and date, alarms, stopwatch, timer, backlight, and proper care.
PreviewCasio Module 1074 Watch User Manual
This user manual provides detailed instructions for operating and maintaining the Casio Module 1074 watch. It covers battery information, water resistance ratings, care instructions, time and date setting, accuracy adjustment, technical specifications, and product details.