Erico 782856245032
Erico KX 170870 Caddy K Clip Conduit Hanger User Manual
Brand: Erico | Model: 782856245032
1. Introduction
The Erico KX 170870 Caddy K Clip Conduit Hanger is a specialized clip designed for efficiently supporting various types of cables and conduits. Constructed from durable spring steel with a Caddy Armor finish, this clip offers a toolless installation method, making it a convenient solution for securing electrical and communication lines to threaded rods, wires, or flanges.
Figure 1: The Erico Caddy K Clip Conduit Hanger. This is a silver-colored, S-shaped spring steel clip designed for securing conduits and cables, featuring a Caddy Armor finish for enhanced durability.
2. Setup and Installation
The Erico Caddy K Clip is engineered for quick and easy installation without the need for specialized tools. Follow these general guidelines for setup:
- Identify Mounting Point: Determine the appropriate threaded rod, wire, or flange where the conduit or cable needs to be supported. Ensure the mounting point is structurally sound and can bear the weight of the conduit/cable.
- Select Correct Clip Size: Verify that the clip's maximum outer diameter capacity (0.472 inches for this model) is suitable for the conduit or cable you intend to secure. This clip accommodates 14-2 to 12-3 AWG MC/AC cables, flexible metallic tubing, armored cable, portable cables, control tubes, and communications cable.
- Attach Clip: Simply snap or slide the Caddy K Clip onto the threaded rod, wire, or flange. The spring steel design provides a secure grip.
- Insert Conduit/Cable: Once the clip is securely attached, guide the conduit or cable into the designated channel of the clip. The clip's design will hold the conduit/cable firmly in place.
- Verify Security: Gently tug on the installed conduit/cable to ensure it is securely held by the clip and that the clip itself is stable on its mounting point.
No installation tools are required for this process, simplifying deployment.
3. Operating and Usage
The Erico Caddy K Clip operates as a passive support mechanism. Once installed, its primary function is to hold conduits and cables in their intended position, preventing sagging, damage, or dislodgement. It is designed for static support in various electrical and communication installations.
- Cable Compatibility: Supports 14-2 to 12-3 AWG MC/AC cables.
- Conduit Compatibility: Suitable for flexible metallic tubing, armored cable, portable cables, control tubes, and communications cable.
- Application: Ideal for overhead installations where conduits or cables need to be suspended from threaded rods, wires, or structural flanges.
4. Maintenance
The Erico Caddy K Clip is designed for long-term, maintenance-free operation due to its robust construction and Caddy Armor finish. Regular maintenance is generally not required, but periodic inspection is recommended to ensure continued performance:
- Visual Inspection: Periodically check the clips for any signs of physical damage, corrosion, or deformation.
- Secureness Check: Ensure that the clip remains firmly attached to its mounting point and that the conduit/cable is still securely held.
- Environmental Factors: While the Caddy Armor finish provides corrosion resistance, extreme environmental conditions (e.g., highly corrosive atmospheres) may warrant more frequent checks.
Clean the clip with a dry cloth if dust or debris accumulates, ensuring not to dislodge the secured cables.
5. Troubleshooting
Given the simple mechanical nature of the Caddy K Clip, troubleshooting is minimal. Most issues relate to improper installation or selection.
| Problem | Possible Cause | Solution |
|---|---|---|
| Clip does not hold conduit/cable securely. | Conduit/cable diameter exceeds clip capacity; clip not fully engaged. | Ensure conduit/cable is within the 0.472-inch maximum outer diameter. Re-engage the clip fully onto the conduit/cable. |
| Clip detaches from mounting point. | Mounting point (rod/wire/flange) is too small or too large for the clip's design; clip not properly snapped on. | Verify the dimensions of the mounting point are compatible with the clip's design. Ensure the clip is firmly snapped onto the mounting point. |
| Visible corrosion or damage. | Exposure to harsh chemicals or extreme environmental conditions; physical impact. | Replace the damaged clip immediately. Consider alternative mounting solutions if the environment is excessively corrosive. |
6. Specifications
- Model Number: 782856245032
- Part Number: KX
- Brand: Erico
- Material: Spring Steel
- Finish: Caddy Armor
- Color: Gray
- Mounting Type: Wall Mount
- Maximum Outer Diameter: 0.472 inches
- Compatible Cable/Conduit Sizes: 14-2 to 12-3 AWG MC/AC cables, flexible metallic tubing, armored cable, portable cables, control tubes, communications cable.
- Item Weight: 14.4 ounces
- Package Dimensions: 5.71 x 4.61 x 3.19 inches
- Certifications: cULus listed
- Installation: Toolless
7. Warranty and Support
For specific warranty information and technical support regarding the Erico KX 170870 Caddy K Clip Conduit Hanger, please refer to the official documentation provided by Erico or visit the manufacturer's official website. Warranty terms typically cover defects in materials and workmanship under normal use.
Manufacturer Contact: For the most up-to-date contact information, please visit the Erico official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.