Introduction
This manual provides essential information for the proper use, installation, and maintenance of your Cosco Topside Backless Booster Car Seat. Please read all instructions carefully before using the product to ensure the safety and comfort of your child.
The Cosco Topside Booster is designed for children weighing 40-100 lbs (18.1-45.3 kg) and measuring 43-57 inches (109.2-144.8 cm) in height. It is intended for use with a vehicle's lap and shoulder belt system.
Important Safety Information
- Always secure your child in the booster seat using the vehicle's lap and shoulder belt system.
- Ensure the shoulder belt is positioned correctly across the center of your child's shoulder and chest, not on the neck or face.
- The lap belt should fit snugly across your child's upper thighs, not on the abdomen.
- Never use this booster seat with only a lap belt.
- Do not use this booster seat if your child exceeds the maximum weight or height limits.
- Inspect the booster seat regularly for any damage or wear. Discontinue use if damaged.
- Refer to your vehicle's owner's manual for specific information regarding child restraint installation.
Setup and Installation
- Placement: Place the booster seat firmly on the vehicle's back seat. Ensure it is positioned flat against the vehicle seat back.
- Child Positioning: Seat your child in the booster seat. Ensure their back is flat against the booster seat back and their bottom is fully on the booster cushion.
- Lap Belt Routing: Route the vehicle's lap belt across your child's upper thighs, under the armrests of the booster seat. The lap belt should lie low on the hips, touching the thighs.
- Shoulder Belt Routing: Route the vehicle's shoulder belt across your child's chest and shoulder. The shoulder belt should rest snugly across the center of the shoulder, not on the neck or off the shoulder.
- Belt Adjuster (if applicable): If your booster seat includes a belt positioning clip (often red), use it to guide the shoulder belt to the correct position across your child's shoulder. (Refer to image for visual guidance).
Image: A child properly secured in the booster seat with the vehicle's lap and shoulder belt. The shoulder belt is guided by the red clip to ensure correct placement across the shoulder.
- Tighten Belts: Pull the shoulder belt upwards to remove any slack from both the lap and shoulder portions of the belt. The belt should be snug against your child's body.
Operating Instructions
Once the booster seat is correctly installed and your child is secured, ensure the vehicle's seatbelt remains properly positioned throughout the journey. Periodically check the belt fit, especially after stops or if your child adjusts their position.
- The booster seat provides the necessary height for the vehicle's seatbelt to fit correctly over your child's body.
- The armrests offer comfort and help guide the lap belt.
- This booster is lightweight, making it easy to transfer between vehicles as needed.
Image: Visual representation of the booster seat's dimensions, showing its compact size.
Care and Maintenance
Regular cleaning and maintenance will help prolong the life of your booster seat and ensure continued hygiene.
- Fabric Cover: The fabric cover is removable for cleaning. Hand-wash only with mild soap and cold water. Do not bleach. Air dry.
- Plastic Shell: The plastic shell can be wiped clean with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check all components for signs of wear, damage, or loose parts. If any part is damaged, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Seatbelt does not fit correctly. | Child is too small/large for the booster, or belt is improperly routed. | Ensure child meets weight/height requirements. Re-route belts according to instructions, using the belt positioning clip if provided. |
| Booster seat slides on vehicle seat. | Booster is not placed firmly or vehicle seat surface is slippery. | Ensure booster is placed flat and firmly against the vehicle seat back. The booster's design helps prevent sliding, but a non-slip mat can be used if necessary. |
| Child complains of discomfort. | Improper belt fit or child not seated correctly. | Verify seatbelt positioning and tightness. Ensure child's back is against the booster and bottom is fully on the cushion. |
Specifications
- Model Number: BC030BJDZ
- Product Dimensions: 15 x 15 x 6.5 inches (38.1 x 38.1 x 16.5 cm)
- Item Weight: 2.2 pounds (1 kg)
- Minimum Weight Recommendation: 40 Pounds (18.1 kg)
- Maximum Weight Recommendation: 100 Pounds (45.3 kg)
- Minimum Height Recommendation: 43 Inches (109.2 cm)
- Maximum Height Recommendation: 57 Inches (144.8 cm)
- Material Type: Fabric (100% polyester cover), Plastic (shell)
- Orientation: Forward Facing
- Installation Type: Vehicle Seat Belt
Warranty and Support
For warranty information, product registration, or customer support, please visit the official Cosco Kids website or contact their customer service department. Keep your purchase receipt for warranty claims.
Online Resources: Visit the Cosco Store on Amazon
