Instruction Manual

Product Overview

The Seco-Larm SD-7101RAEX1Q ENFORCER Push-to-Exit Plate is designed for access control systems, providing a reliable method for exiting a secured area. It features a prominent red pushbutton mounted on a durable stainless-steel faceplate. The plate is clearly marked with "Exit" and "Salida" for universal understanding. Its slimline design makes it suitable for various installations, particularly in industrial environments and buildings requiring compliance with security regulations.

Image: The Seco-Larm SD-7101RAEX1Q push-to-exit button, featuring a red button on a stainless-steel plate with "EXIT" and "SALIDA" text.

Installation Guide

Components Included:

• SD-7101RAEX1Q Push-to-Exit Plate with Red Pushbutton
• Mounting Screws (typically included with standard installation hardware)
• Installation Manual (this document)

Mounting:

1. Select a suitable mounting location near the exit point, ensuring it is easily accessible and visible.
2. Ensure the mounting surface is flat and stable.
3. Position the plate and mark the drilling points for the mounting screws.
4. Drill pilot holes if necessary, appropriate for the mounting screws and wall material.
5. Secure the stainless-steel faceplate to the wall using the provided or appropriate mounting screws. Do not overtighten.

Wiring:

The SD-7101RAEX1Q features quick-connect terminals for easy wiring. Ensure power is disconnected before performing any wiring.

• Identify the Normally Open (NO) and Common (COM) terminals on the push-to-exit button.
• Connect the appropriate wires from your access control panel or door release mechanism to these terminals. Typically, the button will complete a circuit to trigger a door release when pressed.
• Ensure all connections are secure and properly insulated to prevent short circuits.
• Refer to your access control system's manual for specific wiring diagrams and voltage requirements.

Operation

The Seco-Larm SD-7101RAEX1Q operates as a momentary contact switch. When the red pushbutton is pressed, it momentarily closes a circuit (Normally Open contact type), signaling the connected access control system or door release mechanism to unlock the door. Releasing the button opens the circuit, returning the system to its default state. This allows for quick and intuitive egress from a secured area.

Maintenance

The SD-7101RAEX1Q is designed for durability and requires minimal maintenance. Regular inspection and cleaning will ensure optimal performance.

• Cleaning: Periodically wipe the stainless-steel faceplate with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or silk-screened text.
• Inspection: Annually inspect the mounting screws for tightness and the wiring connections for any signs of wear or corrosion. Ensure the pushbutton operates smoothly without sticking.
• Functionality Test: Periodically test the button's functionality by pressing it and verifying that the connected door release mechanism activates correctly.

Troubleshooting

Technical Specifications

Warranty and Support

Seco-Larm products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Seco-Larm website.

For technical support, troubleshooting assistance, or replacement parts, please contact Seco-Larm customer service. Contact information can typically be found on the manufacturer's website or product packaging.

• Website: www.seco-larm.com (example link, verify actual URL)
• Customer Service: Refer to manufacturer's website for phone numbers or email.