1. Introduction
Thank you for purchasing the Energizer PMHRL71 LED Light. This rechargeable metal light is designed for durability and high performance, offering up to 1,200 lumens of brightness and a long-lasting battery. This manual provides essential information for the safe and effective use of your new light.
Package Contents
- Energizer PMHRL71 LED Light
- Rechargeable Lithium Ion Battery (pre-installed)
- Micro USB Type-B Charging Cable
- Instruction Manual (this document)
Figure 1: Energizer PMHRL71 LED Light. A sleek, grey metal flashlight with a green ring near the head, featuring multiple LED bulbs.
2. Safety Information
Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not look directly into the LED light when it is on. The intense brightness can cause temporary vision impairment or permanent eye damage.
- Keep out of reach of children.
- Do not disassemble, modify, or attempt to repair the light. This will void the warranty and may cause damage or injury.
- Use only the provided charging cable or a compatible micro USB Type-B cable.
- Do not expose the light to extreme temperatures, direct sunlight for prolonged periods, or open flames.
- Although the light has an IPX4 waterproof rating, do not submerge it in water.
- Dispose of batteries according to local regulations.
3. Setup
Initial Charging
Before first use, fully charge the Energizer PMHRL71 LED Light. The light comes with a pre-installed Lithium Ion battery.
- Locate the charging port cover on the light.
- Open the cover to expose the micro USB Type-B port.
- Connect the smaller end of the supplied micro USB cable to the light's charging port.
- Connect the larger USB-A end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port, power bank). Note: An AC adapter is not included.
- The charging indicator light will illuminate (color may vary) to show that charging is in progress.
- Once fully charged, the indicator light will change or turn off. Disconnect the charging cable and securely close the port cover to maintain water resistance.
Figure 2: The Energizer PMHRL71 LED Light connected to a wall adapter via its micro USB charging cable. The image highlights that a USB cable is included, but an AC adapter is not.
Power Bank Functionality
The Energizer PMHRL71 can also be used to charge mobile devices in emergency situations.
- Ensure the light is sufficiently charged.
- Connect your mobile device's USB charging cable to the light's USB output port (usually the same port used for charging the light itself, or a dedicated output port if present).
- The light will begin charging your device.
Figure 3: The Energizer PMHRL71 LED Light connected to a smartphone via a USB cable, demonstrating its ability to charge mobile devices.
4. Operating Instructions
Power On/Off and Mode Selection
The Energizer PMHRL71 features multiple light modes for various situations. The power button is typically located near the head of the flashlight.
- To Turn On/Off: Press the power button once to turn the light on. Press and hold the power button for approximately 1-2 seconds to turn the light off from any mode.
- To Cycle Modes: With the light on, press the power button repeatedly to cycle through the available light modes. The light features 7 distinct modes.
Figure 4: Diagram illustrating the 7 light modes of the Energizer PMHRL71 LED Light, including Spot & Wide High, Spot & Wide Low, Strobe, Wide High, Wide Low, Spot High, and Spot Low.
Light Modes Explained
- Spot & Wide High: Combines focused beam with wide area illumination at maximum brightness.
- Spot & Wide Low: Combines focused beam with wide area illumination at reduced brightness.
- Strobe: Flashing light for signaling or disorienting.
- Wide High: Broad area illumination at maximum brightness.
- Wide Low: Broad area illumination at reduced brightness.
- Spot High: Focused, narrow beam at maximum brightness for long-distance viewing.
- Spot Low: Focused, narrow beam at reduced brightness.
5. Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your Energizer PMHRL71 LED Light.
- Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the light in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery every 3-6 months to maintain battery health.
- Battery Care: The integrated Lithium Ion battery is designed for long life. Avoid fully discharging the battery frequently, as this can reduce its lifespan.
- Water Resistance: Ensure the charging port cover is securely closed at all times when not charging to maintain the IPX4 water resistance.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light fully using the supplied USB cable. |
| Light output is dim. | Low battery charge. | Recharge the light. |
| Light does not charge. | Faulty cable or power source. | Try a different USB cable or a different USB power source. Ensure the cable is fully inserted. |
| Cannot cycle through modes. | Incorrect button press. | Ensure the light is on, then press the power button briefly to cycle. Hold to turn off. |
If the problem persists after trying these solutions, please contact Energizer customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | PMHRL71 |
| Light Source | LED |
| Brightness | Up to 1,200 Lumens |
| Run Time | Up to 8 hours (depending on mode) |
| Beam Distance | Up to 200 meters (66.6 ft) |
| Shock Resistance | 1 meter (3.3 ft) |
| Waterproof Rating | IPX4 (Splash resistant) |
| Battery Type | 1 x Lithium Ion (included) |
| Charging Input | 5V 1A (Micro USB Type-B) |
| Power Bank Output | 5V 1A (Max) |
| Material | Metal |
| Dimensions (L x W x H) | 22.7 x 4.8 x 4.8 cm (approx. 226.5mm x 48mm x 48mm) |
| Weight | 470 g |
Figure 5: Technical diagram showing the dimensions (width 226.5mm, height/depth 48mm) and key specifications like light source (LED), battery (Lithium Ion x1), nominal voltage (3.7V 5000mAh), input/output (5V 1A), and weight (approx. 378g).
Figure 6: Visual representation of key performance metrics: Maximum brightness 1200 lumens, Maximum irradiation distance 200 meters, Maximum lighting time 8 hours, and IPX4 waterproof rating.
8. Warranty and Support
Energizer stands behind the quality of its products. For warranty information, technical support, or service inquiries, please refer to the official Energizer website or contact their customer service department.
Official Website: www.energizer.com
Please have your product model number (PMHRL71) and purchase date available when contacting support.
