Moen CA87006SRS Kitchen Faucet Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Moen CA87006SRS Kitchen Faucet. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product. The Moen CA87006SRS is a single-handle kitchen faucet featuring a convenient pullout spray, designed for deck-mount installation.

Product Features

• Pullout Spray: Offers enhanced reach and flexibility for various kitchen tasks.
• Spot Resist Stainless Finish: Resists fingerprints and water spots for a cleaner-looking kitchen.
• Single Handle Design: Allows for easy adjustment of water temperature and flow.
• Deck Mount Installation: Designed for single-hole installation on your kitchen sink or countertop.
• Durable Construction: Engineered for long-lasting performance and reliability.

Setup and Installation

Professional installation is recommended for optimal performance and to ensure compliance with local plumbing codes. Before beginning, ensure you have all necessary tools and components. Turn off the main water supply to your kitchen area before starting any work.

Pre-Installation Steps:

1. Gather Tools: Ensure you have a basin wrench, adjustable wrench, screwdriver, plumber's putty or silicone sealant, and safety glasses.
2. Clear Area: Remove any items from under the sink to provide clear access.
3. Turn Off Water: Locate and turn off the hot and cold water supply valves under the sink or the main water supply to your home.
4. Remove Old Faucet (if applicable): Disconnect water supply lines and mounting nuts from the old faucet. Lift and remove the old faucet.

Faucet Installation:

1. Prepare Mounting Surface: Clean the sink or countertop surface where the faucet will be installed. Apply plumber's putty or silicone sealant around the base of the new faucet if required by the manufacturer's specific instructions.
2. Position Faucet: Insert the faucet body through the mounting hole from above the sink.
3. Secure Faucet: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank. Hand-tighten, then use a basin wrench to firmly secure the faucet, ensuring it is properly aligned.
4. Connect Water Supply Lines: Attach the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use an adjustable wrench to tighten connections, but do not overtighten.
5. Connect Spray Hose: Connect the pullout spray hose to the designated port on the faucet body. Ensure all connections are secure.
6. Install Weight: Attach the hose weight to the pullout spray hose at the indicated location to ensure proper retraction.
7. Test for Leaks: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. Run the faucet for a few minutes to flush out any debris and check for proper operation of the spray head.

This image displays the Moen CA87006SRS kitchen faucet, featuring its single-handle design and integrated pullout spray head. The faucet is shown in a Spot Resist Stainless finish, highlighting its modern aesthetic and functional design.

Operating Instructions

Water Flow and Temperature Control:

• On/Off: Lift the single handle to turn the water on and push it down to turn it off.
• Temperature Adjustment: Move the handle to the left for hot water and to the right for cold water.
• Flow Adjustment: The height to which the handle is lifted controls the water flow rate.

Pullout Spray Function:

• Extend Spray Head: Gently pull the spray head from the spout to extend the hose.
• Toggle Spray Modes: Press the button(s) on the spray head to switch between aerated stream and powerful spray functions.
• Retract Spray Head: When finished, guide the spray head back into the spout. The hose weight will assist in smooth retraction.

Maintenance

Regular cleaning and maintenance will help preserve the finish and functionality of your Moen faucet.

Cleaning the Faucet:

• Spot Resist Stainless Finish: Clean with a soft, damp cloth and mild soap. Rinse thoroughly with warm water and dry with a soft cloth.
• Avoid Abrasives: Do not use abrasive cleaners, harsh chemicals, polishes, or scouring pads, as these can damage the finish.
• Regular Cleaning: Wipe down the faucet regularly to prevent mineral buildup and water spots.

Aerator Maintenance:

• If water flow decreases or becomes erratic, the aerator may be clogged with debris or mineral deposits.
• Unscrew the aerator from the tip of the spout.
• Rinse the aerator screen under running water to remove any particles. For stubborn mineral deposits, soak the aerator in a solution of equal parts white vinegar and water.
• Reinstall the aerator, ensuring it is securely tightened.

Troubleshooting

Refer to the following table for common issues and their solutions.

Specifications

Warranty and Support

Moen products are manufactured under the highest standards of quality and workmanship. Moen offers a comprehensive warranty on its products, covering defects in material and manufacturing. For specific warranty details, claims, or technical assistance, please refer to the official Moen website or contact Moen customer service directly.

Moen Customer Service: For support, visit www.moen.com/customer-support or refer to the contact information provided with your product packaging.