Woods 50001WD Indoor 24-Hour Mechanical Timer User Manual

Product Overview

The Woods 50001WD Indoor 24-Hour Heavy Duty Plug-In Mechanical Timer is designed to automate the operation of various indoor appliances. This timer allows you to set specific ON/OFF times for devices such as lamps, fans, and holiday lights, helping to conserve energy and enhance convenience. It features a single grounded outlet and a mechanical dial for easy programming.

Image: Front view of the Woods 50001WD Indoor 24-Hour Mechanical Timer, showing the central dial and the "OUTLET ON" and "TIMER ON" switch at the top.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Indoor Use Only: This timer is designed for indoor use in dry locations only. Do not expose to water or moisture.
• Electrical Rating: Do not exceed the electrical rating of 120V AC, 60Hz, 15A resistive, 1000W tungsten, 5A ballast. Overloading the timer can cause overheating and fire.
• Grounded Outlet: This timer features a grounded outlet. Ensure the appliance you are connecting is also grounded if required.
• Unplug Before Cleaning: Always unplug the timer from the wall outlet before cleaning. Use a dry cloth for cleaning.
• Supervision: Do not leave appliances that could be dangerous unattended while connected to the timer (e.g., heating appliances).
• Children: Keep out of reach of children.

Product Features and Components

The Woods 50001WD timer consists of the following key components:

• 24-Hour Dial: A rotating dial with markings for 24 hours, allowing for precise time setting.
• Segment Pins: Small, push-down pins around the dial, each representing 30 minutes. Pushed-down pins indicate ON periods.
• Manual Override Switch: A slide switch at the top to select between "OUTLET ON" (always on) and "TIMER ON" (programmed operation).
• Grounded Outlet: A single 3-prong outlet on the side for connecting your appliance.
• Power Prongs: Two flat prongs and one round grounding prong for plugging into a wall outlet.

Image: Side view of the Woods 50001WD Mechanical Timer, highlighting the single grounded outlet and the power prongs.

Image: Diagram illustrating key features such as 24 ON/OFF settings, daily cycle repetition, tool-free setup, and compatibility with CFL/LED lighting.

Setup Instructions

1. Set Current Time:

   Rotate the entire dial clockwise until the "TIME NOW" arrow points to the current approximate time. PM hours are typically shaded on the dial. Ensure accuracy for proper operation.

   

   Image: Close-up of the timer's dial, showing the "TIME NOW" arrow and the 24-hour markings with AM/PM indicators.

2. Program ON/OFF Times:

   The dial is surrounded by small segment pins. Each pin represents 30 minutes. To set a period for the timer to be ON, push the corresponding segment pins DOWN. For periods you want the timer to be OFF, leave the pins UP.

   For example, if you want the device to turn ON from 6:00 PM to 10:00 PM, push down all the pins between the 6 PM and 10 PM marks on the dial.

3. Set Manual Override Switch:

   Ensure the manual override switch at the top of the timer is set to "TIMER ON" for the programmed settings to take effect. If you want the connected device to be continuously ON, slide the switch to "OUTLET ON".

4. Plug into Wall Outlet:

   Plug the timer into a standard 120V AC wall outlet.

5. Connect Appliance:

   Plug the appliance you wish to control into the grounded outlet on the side of the timer.

Operating Instructions

Once set up, the timer will automatically turn your connected appliance ON and OFF according to your programmed schedule. The dial will continuously rotate, indicating the current time.

• Automatic Operation: When the switch is set to "TIMER ON", the timer will activate the connected appliance during the periods where pins are pushed down (ON) and deactivate it when pins are up (OFF). This cycle repeats every 24 hours.
• Manual Override: To temporarily or permanently turn the connected appliance ON, slide the switch to "OUTLET ON". The timer function will be bypassed. To revert to programmed operation, slide the switch back to "TIMER ON".

Maintenance

To ensure the longevity and proper functioning of your Woods mechanical timer, follow these simple maintenance guidelines:

• Cleaning: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the timer for any signs of damage, such as cracks in the casing or frayed wires. Do not use if damaged.

Troubleshooting

Specifications

Image: Diagram showing the dimensions of the Woods 50001WD Mechanical Timer: 5.2 inches in height, 4 inches in width, and 1.5 inches in depth.

Image: Back view of the Woods 50001WD Mechanical Timer, displaying electrical specifications such as 125V AC, 60Hz, 15A resistive, 1000W tungsten, and 5A ballast ratings, along with CSA certification.

Warranty and Support

Woods products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Woods website. For technical support or inquiries, please contact Woods customer service.

You can also refer to the official User Manual (PDF) for additional details.