Ritto RGE1787770

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Ritto RGE1787770 Video Intercom Kit User Manual

Model: RGE1787770

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ritto RGE1787770 Video Intercom Kit. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

Ritto RGE1787770 Video Intercom Kit, White

Figure 1: Ritto RGE1787770 Video Intercom Kit. This image displays the white indoor unit of the video intercom system, featuring a screen at the top showing a person's face, a circular directional control pad in the middle, and several function buttons below it. The Ritto brand logo is visible in the top right corner.

Setup and Installation

The Ritto RGE1787770 video intercom system is designed for integration with a compatible door station camera module (e.g., Ritto Camera Module 18787) or a camera switch (e.g., Ritto Camera Switch 14915).

Power Requirements:

  • Voltage: 12 V AC or 18 V to 24 V DC

Physical Dimensions:

  • Height x Width x Depth: 221 mm x 91 mm x 24 mm

Optional Accessories:

  • Table Console 17313: For use as a desktop unit.

Refer to the separate installation guide for detailed wiring and mounting instructions for the complete system, including the outdoor camera unit.

Operating Instructions

The RGE1787770 features a user-friendly interface with an On-Screen Display (OSD) menu for easy navigation and configuration.

Display Features:

  • Screen Size: 89 mm (3.5-inch) diagonal
  • Type: Color TFT display
  • Resolution: 320 x 240 x 3 (RGB) pixels
  • Backlight: LED
  • Protection: Scratch-protected screen

Basic Functions:

  • Call/Hang-up Button: Initiates or terminates a call.
  • Door Opening Button: Activates the door release mechanism.
  • Mute Function: Silences the call tone with optical feedback.
  • Adjustable Volume: 8 levels for call tone.
  • Optical Call Display: Visual indication of incoming calls.
  • Night Light Function: Provides illumination in low-light conditions.
  • Privacy Functions: Equipped with "listening inhibited" (Mithörgesperrt) and "viewing inhibited" (Mitsehgesperrt) features for enhanced privacy during calls.

OSD Menu Navigation:

The OSD menu is available in 13 languages. Use the directional control pad to navigate and select options.

  • Language Selection: Adjust the menu language as needed.
  • Display Settings: Adjust brightness, color, and contrast of the display.
  • Call Distinction: Differentiates between door calls and floor calls.
  • Selectable Functions: Access up to 10 additional functions through the menu.

Maintenance

To ensure the longevity and optimal performance of your Ritto RGE1787770 Video Intercom Kit, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the display and housing. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the surfaces.
  • Environmental Conditions:
    • Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
    • Relative Humidity: Maximum 80% (non-condensing)
  • Avoid Exposure: Do not expose the unit to direct sunlight for extended periods, extreme temperatures, or high humidity.

Troubleshooting

If you encounter issues with your Ritto RGE1787770, refer to the following common troubleshooting steps:

  • No Power/Display:
    • Check the power supply connections.
    • Verify that the correct voltage (12 V AC or 18-24 V DC) is being supplied.
  • No Video/Poor Image Quality:
    • Ensure the camera module (e.g., 18787) or camera switch (e.g., 14915) is correctly connected and powered.
    • Adjust brightness, color, and contrast settings via the OSD menu.
    • Check for any obstructions or damage to the outdoor camera lens.
  • No Audio/Poor Audio Quality:
    • Check all audio connections between the indoor unit and the outdoor station.
    • Adjust the call volume using the OSD menu.
    • Ensure the mute function is not active.
  • Door Release Not Working:
    • Verify the wiring to the door strike or gate opener.
    • Ensure the door release button is functioning correctly.

If these steps do not resolve the issue, please contact Ritto customer support or a qualified technician.

Specifications

FeatureDetail
BrandRitto
Model NumberRGE1787770
Product Dimensions (H x W x D)221 x 91 x 24 mm (8.7 x 3.6 x 0.9 inches)
Weight9.07 grams (0.32 ounces)
Voltage12 V AC or 18 V to 24 V DC
Display Type3.5-inch Color TFT, LED Backlight
Display Resolution320 x 240 x 3 (RGB) pixels
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Max Relative Humidity80%
ColorWhite
Batteries RequiredNo

Warranty and Support

For warranty information and technical support, please contact Ritto directly or refer to their official website. Keep your purchase receipt as proof of purchase.

Manufacturer: Ritto

ASIN: B0060GNXRA

© 2024 Ritto. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.