Introduction
Welcome to your new Tensor Compact Fluorescent Computer Lamp. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your lamp. Please read these instructions carefully before use and retain them for future reference.
Safety Instructions
- Read all instructions before operating the lamp.
- Do not expose the lamp to water or excessive moisture.
- Ensure the lamp is unplugged before cleaning or replacing the bulb.
- Use only the specified bulb type and wattage (13-watt compact fluorescent).
- Keep the lamp away from flammable materials.
- Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel for assistance.
Package Contents
- Tensor Compact Fluorescent Computer Lamp Unit
- Power Adapter
- Instruction Manual
Setup
Unpacking
Carefully remove all components from the packaging. Inspect the lamp for any signs of damage during transit. If any damage is found, do not use the lamp and contact customer support.
Assembly
The Tensor Compact Fluorescent Computer Lamp is designed for straightforward setup. No complex assembly is required. The lamp unit is largely pre-assembled.
Placement
Place the lamp on a stable, flat surface such as a desk or table. Ensure there is adequate space around the lamp for safe operation and adjustment. Avoid placing the lamp near heat sources or in direct sunlight.
The image displays the packaging for the Tensor Compact Fluorescent Computer Lamp, model CL1C-64. The packaging highlights key features such as its adjustable functionality, allowing the shade to move in various directions, and the inclusion of an easily removable document clip.
Power Connection
Insert the power adapter's connector securely into the lamp's power input port. Then, plug the power adapter into a standard, easily accessible electrical outlet. Ensure the voltage matches your local power supply.
Operating Instructions
Turning On/Off
Locate the power switch, typically positioned on the lamp's base or power cord. Press the switch to turn the lamp on or off. The lamp will illuminate when switched to the 'on' position.
Adjusting the Lamp
The lamp features an adjustable design, allowing the lamp head and arm to be repositioned. Gently move the lamp components to direct the light precisely where needed. The shade is designed to move in multiple directions for optimal illumination.
Control Methods
This lamp supports control via a dedicated app and a remote control. For detailed instructions on pairing the lamp with your device, configuring app settings, or using the remote control functions, please refer to the separate app/remote guide included with your purchase or available on the Tensor website.
Maintenance
Cleaning
Always disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to gently wipe the lamp's surfaces. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the finish or electrical components.
Bulb Replacement
This lamp uses a compact fluorescent bulb. To replace the bulb:
- Ensure the lamp is unplugged and completely cool before handling.
- Carefully twist the old bulb counter-clockwise to remove it from the socket.
- Insert the new 13-watt compact fluorescent bulb into the socket and twist clockwise until it is securely in place. Do not overtighten.
- Reconnect the lamp to power and test its functionality.
Troubleshooting
Lamp Does Not Turn On
- Check if the power cord is securely plugged into both the lamp and the electrical outlet.
- Verify that the electrical outlet is functional by testing it with another device.
- Ensure the bulb is correctly installed and not burnt out. Replace the bulb if necessary, following the bulb replacement instructions.
Flickering Light
- Ensure the bulb is screwed in tightly into its socket.
- Replace the bulb if flickering persists, as it may be nearing the end of its operational lifespan.
Specifications
| Feature | Detail |
|---|---|
| Brand | Tensor |
| Model Number | CL1C-64 |
| Light Source Type | Fluorescent |
| Wattage | 13 watts |
| Mounting Type | Tabletop |
| Special Feature | Adjustable |
| Control Method | App, Remote |
| Item Weight | 3.2 pounds |
| UPC | 077796252128 |
Document Clip
The lamp includes an easily removable document clip, designed to hold papers or notes for convenient viewing while working.
Warranty and Support
For warranty information, technical support, or to inquire about replacement parts, please refer to the contact details provided with your original purchase documentation. You may also visit the official Tensor website for additional resources and customer service contact information.
