FORSÅ Work Lamp Assembly Instructions
Product by IKEA
Important Safety Information ⚠️
General Safety: This product is equipped with a polarized plug (one blade is wider than the other) to reduce the risk of electric shock. The plug is designed to fit into a polarized outlet in only one direction. If the plug does not insert fully, reverse it. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized plug or alter the plug.
Caution: To prevent electrical shock, match the wide blade of the plug to the wide slot in the outlet and insert the plug fully.
Warning: Deviation from the assembly instructions may result in a risk of fire or electric shock.
Assembly Steps
Follow these steps to assemble your FORSÅ work lamp.
Step 1: Secure the Base
Place the lamp base on a stable surface. Insert the threaded end of the main lamp arm assembly into the designated opening on the base. From underneath the base, tighten the screw [⚙️] to secure the arm.
Step 2: Connect Lamp Arm
The diagram illustrates the main lamp arm, including the power cord, being attached to the base. A screw is tightened to fix the arm in place.
Step 3: Adjust Spring Tension
Locate the spring mechanisms on the lamp arm. The diagram shows two springs (2x) being attached or adjusted. A detailed view demonstrates how to modify the spring tension using a finger and a rotating mechanism.
Step 4: Attach Lampshade
Position the lampshade over the socket at the end of the lamp arm. Insert the provided screw through the arm and into the lampshade fixture. Tighten the screw [⚙️] to secure the lampshade.
Step 5: Install Light Bulb
Insert a suitable light bulb into the socket. An arrow indicates the direction for screwing in the bulb.
Step 6: Final Adjustments ℹ️
The diagram includes an information icon and close-up views of the lamp's joints. This step involves adjusting the lamp arm's flexibility and position by manipulating the joints and potentially the spring tension for optimal use.
