Ashley Leo Panel Bed Full - Instruction Manual

1. Introduction

Thank you for purchasing the Ashley Leo Panel Bed Full. This manual provides detailed instructions for the safe assembly, proper usage, and effective maintenance of your new bed. Please read all instructions carefully before beginning assembly and keep this manual for future reference.

Image 1.1: The fully assembled Ashley Leo Panel Bed Full, featuring its distinctive blue finish and panel design, ready for use in a bedroom environment.

2. Safety Information

Always follow these safety precautions to prevent injury or damage to the product:

• Keep all hardware and small parts out of reach of children.
• Assemble the bed on a soft, clean surface (e.g., carpet or blanket) to prevent scratching.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not use power tools for assembly unless specifically instructed, as this may overtighten and damage components.
• Do not stand on or jump on the bed frame.
• Use only the mattress size recommended for a full-size bed.

3. Parts List

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Headboard (1)
• Footboard (1)
• Side Rails (2)
• Center Support Legs (2-3, quantity may vary)
• Slats (Multiple, quantity may vary)
• Hardware Pack (Bolts, Washers, Nuts, Allen Wrench)

4. Setup and Assembly

Assembly typically requires two adults. Please follow these steps in order:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Identify each component using the parts list.
2. Attach Side Rails to Headboard: Align one side rail with the pre-drilled holes on the headboard. Insert the appropriate bolts and washers, and loosely tighten with the Allen wrench. Repeat for the second side rail.
3. Attach Side Rails to Footboard: Carefully lift the footboard and align it with the open ends of the side rails. Insert the remaining bolts and washers, and loosely tighten.
4. Tighten All Connections: Once all four corners are connected, go back and securely tighten all bolts using the Allen wrench. Do not overtighten.
5. Install Center Support Legs (if applicable): If your bed frame includes center support legs, attach them to the designated crossbar or slat support beam according to the diagrams provided in your specific hardware pack. Ensure they are firmly attached and provide stable support.
6. Place Slats: Lay the wooden slats across the side rails, ensuring they are evenly spaced and secured if there are pre-drilled holes or attachment points. Some slats may require screwing into the side rails for added stability.
7. Final Check: Before placing the mattress, gently shake the frame to ensure it is stable and all connections are secure.

5. Usage and Care

To ensure the longevity and appearance of your Leo Panel Bed, follow these guidelines:

• Mattress Compatibility: Use a standard full-size mattress. A box spring may or may not be required depending on the mattress type and personal preference; check your mattress manufacturer's recommendations.
• Weight Distribution: Distribute weight evenly across the bed surface. Avoid concentrating heavy loads in one small area.
• Cleaning: Dust regularly with a soft, dry cloth. For spills, wipe immediately with a damp cloth and dry thoroughly. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
• Moving the Bed: When moving the bed, always lift it rather than dragging it to prevent damage to the frame and your flooring.

6. Maintenance

Regular maintenance will help preserve your bed's condition:

• Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary, but do not overtighten.
• Slat Inspection: Inspect the wooden slats for any signs of cracking or damage. Replace any damaged slats immediately to maintain proper mattress support.
• Surface Protection: If placing items on the headboard or footboard, use felt pads or coasters to prevent scratches.

7. Troubleshooting

If you encounter any issues with your bed, refer to the following common problems and solutions:

• Squeaking Noises:
  • Check all bolts and screws for tightness. Loose connections are a common cause of squeaking.
  • Ensure slats are properly seated and not rubbing against the side rails.
  • Verify that the center support legs (if present) are firmly on the floor and not wobbly.
• Bed Feels Unstable/Wobbly:
  • Re-tighten all assembly hardware.
  • Ensure the bed is on a level surface. If not, use shims under the legs to stabilize.
  • Confirm that all parts are correctly assembled according to the instructions.
• Damaged Finish:
  • For minor scratches, touch-up pens or furniture markers matching the blue finish may be used.
  • For significant damage, contact customer support for repair options or professional advice.

8. Specifications

9. Warranty and Support

Ashley Furniture stands behind the quality of its products. For specific warranty information regarding your Leo Panel Bed Full, please refer to the warranty card included with your purchase or visit the official Ashley Furniture website. Warranty terms typically cover manufacturing defects for a limited period from the date of purchase.

For customer support, missing parts, or assembly assistance, please contact Ashley Furniture Customer Service:

• Website: www.ashleyfurniture.com
• Phone: Refer to the Ashley Furniture website for the most current contact numbers.
• Email: Refer to the Ashley Furniture website for customer service email options.

When contacting support, please have your model number (B005VHJHE2) and date of purchase readily available.