Sunbeam Microplush Heated Electric Throw - Charcoal Grey User Manual

Introduction

This manual provides essential information for the safe and effective use of your Sunbeam Microplush Heated Electric Throw. Please read all instructions carefully before use and retain this manual for future reference.

Image: Packaging for the Sunbeam Microplush Heated Throw, highlighting its charcoal grey color, soft texture, and the included controller. The packaging also indicates its size (50x60 inches), 3 heat settings, and 3-hour auto-off feature. A lifestyle image shows the throw draped over a light-colored couch.

Important Safety Information

To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions:

• This product is designed for use with 110V electrical systems only. Use of a voltage converter will void the product warranty.
• Always refer to the included use and safety instructions to ensure safe operation.
• Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
• Do not use if wet.
• Do not use with pins or other metallic objects.
• Do not use if the cord or controller is damaged.
• Do not dry clean. Dry cleaning solvents may damage the insulation of the heating element.
• Do not tuck in, pinch, or fold the heating wires.
• Unplug the throw when not in use.

Setup

1. Unpack the heated throw and controller from its packaging.
2. Ensure the connector on the throw is securely plugged into the controller.
3. Plug the power cord into a standard 110V electrical outlet.
4. Lay the throw flat on a couch, chair, or bed, ensuring no kinks or folds in the heating wires.

Operating Instructions

Your Sunbeam Microplush Heated Electric Throw features an easy-to-use controller with multiple heat settings and an automatic shut-off function.

Heat Settings

• The controller offers 3 heat settings to customize your warmth level.
• Press the power button to turn the throw on.
• Use the heat setting button (or up/down arrows, depending on controller model) to cycle through the available heat levels (e.g., Low, Medium, High).
• Allow a few minutes for the throw to reach the desired temperature.

Automatic Shut-Off

• For safety and energy conservation, the heated throw is equipped with a 3-hour auto-off feature.
• The throw will automatically turn off after approximately 3 hours of continuous use.
• To restart the throw after auto-off, simply turn the controller off and then back on.

Turning Off

• To manually turn off the throw, press the power button on the controller until the indicator light turns off.
• Always unplug the throw from the wall outlet when not in use for extended periods.

Maintenance and Care

Proper care will extend the life of your heated throw. Always disconnect the controller from the throw and unplug from the wall outlet before cleaning.

Washing Instructions

• The Sunbeam electric throw is machine washable.
• Wash on a gentle cycle with cold water.
• Do not bleach.
• Do not dry clean.

Drying Instructions

• The throw is dryer safe.
• Tumble dry on low heat or air dry.
• Ensure the throw is completely dry before reconnecting the controller and plugging it in.
• Do not iron.

Storage

• When storing, gently fold the throw. Avoid tightly creasing or folding the heating wires.
• Store in a cool, dry place.

Troubleshooting

If your heated throw is not operating as expected, please check the following common issues:

Specifications

• Model: B005UCRRTA
• Dimensions: 50 inches x 60 inches (127 cm x 152 cm)
• Material: Microplush (100% Polyester)
• Color: Charcoal Grey
• Heat Settings: 3
• Auto Shut-Off: 3 hours
• Power: 110V AC (North America only)
• Care: Machine Washable, Dryer Safe
• Item Weight: Approximately 3.05 pounds
• UPC: 027045734769

Warranty and Support

Your Sunbeam Microplush Heated Electric Throw comes with a 5-Year Limited Manufacturer's Warranty.

This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For warranty service or technical support, please visit the official Sunbeam website or contact their customer service department. Using a voltage converter for this product outside of 110V electrical systems will automatically void the warranty.

Additional safety certifications for this product can be viewed on the UL or Intertek websites.