Roebic R0EB1C FRK-6

Roebic Foaming Root Killer Instruction Manual

Model: R0EB1C FRK-6

Introduction

The Roebic Foaming Root Killer is a specialized product designed to eliminate tree and shrub roots that can infiltrate and obstruct sewer lines and septic systems. This granular formula, when activated by water, creates a dense foam that fills the entire pipe, ensuring comprehensive contact with root growth. Regular application helps maintain clear plumbing and prevents costly backups.

Safety Information

WARNING: This product contains chemicals that can be harmful if misused. Read and follow all instructions and warnings on the product label carefully before use.

  • Keep out of reach of children and pets.
  • Avoid contact with skin and eyes. Wear appropriate protective gloves and eye protection during handling and application.
  • Do not ingest. If swallowed, seek immediate medical attention.
  • Ensure adequate ventilation when using the product.
  • Do not mix with other chemicals or drain cleaners.
  • After application, ensure the treated area is not accessed by children or pets for the recommended duration.
  • Dispose of unused product and empty containers according to local regulations.
  • This product is not available for export.

Setup and Preparation

Before applying Roebic Foaming Root Killer, ensure you have read all safety instructions. For best results, apply the product when water flow through the affected pipes will be minimal for an extended period, ideally overnight (8 hours or more). This allows the foam sufficient time to act on the roots.

Roebic Foaming Root Killer product container

Image 1: Roebic Foaming Root Killer product container. This image shows the front label of the product, indicating its brand and purpose.

Operating Instructions

Follow these steps for effective application:

  1. Determine Application Point: Identify the toilet or drain closest to the suspected root intrusion in your sewer line.
  2. Measure Product: Refer to the product label for the recommended dosage. Typically, one pound of product is used per application for standard residential sewer lines.
  3. Apply Product: Carefully pour the measured granular product directly into the toilet bowl or drain.
  4. Flush: Immediately flush the toilet or run water into the drain to ensure the product is carried into the pipe and comes into contact with water. The product will begin to foam upon contact with water.
  5. Allow to Sit: For optimal results, avoid using water in the treated plumbing system for at least 8 to 12 hours after application. This allows the foam to expand and remain in contact with the roots for an extended period, maximizing its effectiveness.

Alternative Application Method (for external roots): For roots growing outside the main sewer line, some users have reported success by drilling 12-inch deep holes in the ground between the tree and the sewer line, then placing a few ounces of the product into each hole. This method should be used with caution and only after consulting local plumbing professionals or product guidelines.

Maintenance

To prevent future root growth and maintain clear sewer lines, regular application of Roebic Foaming Root Killer is recommended. Many users find success with a preventative treatment schedule, such as:

  • Annual Treatment: Apply once a year as a general preventative measure.
  • Bi-Monthly or Quarterly Treatment: For areas with aggressive root growth or a history of frequent blockages, applying every two to three months may be beneficial.

Consistent application helps to inhibit root regrowth and maintain the integrity of your plumbing system.

Troubleshooting

If you experience persistent root problems or blockages after following the application instructions, consider the following:

  • Re-application: A second application may be necessary for severe root intrusions.
  • Professional Inspection: If blockages continue, it is advisable to contact a qualified plumber to inspect your sewer lines. There may be structural damage or other issues not related to root growth that require professional attention.
  • Dosage: Ensure you are using the correct dosage as per the product label.

For further assistance, please contact Roebic customer support.

Specifications

FeatureDetail
BrandRoebic
Model NumberR0EB1C FRK-6
Item FormGranules
Item Weight (per unit)16 ounces
Unit Count (total for 6-pack)96 Ounce
UPC033051002778
ASINB005LIFZI8
ManufacturerRoebic Laboratories, Inc

Warranty Information

Specific warranty details for Roebic Foaming Root Killer are typically provided on the product packaging or through the manufacturer's official website. Please refer to the product label or contact Roebic Laboratories, Inc. directly for comprehensive warranty information.

Support

For technical support, product inquiries, or safety data sheets, please contact the manufacturer:

Manufacturer: Roebic Laboratories, Inc.

Please visit the official Roebic website or refer to the product packaging for contact details such as phone numbers or email addresses.

© 2023 Roebic Laboratories, Inc. All rights reserved.

Related Documents - R0EB1C FRK-6

Preview Roebic Foaming Root Killer: Effective Sewer Line Root Control | Product Guide
Learn how to use Roebic Foaming Root Killer to eliminate and prevent root growth in sewer lines and around pipes. Includes safety, application, and disposal instructions for Roebic Laboratories' product.
Preview Filter Regulator Kit Assembly Guide | Saginaw Control & Engineering
Step-by-step assembly guide for the Saginaw Control & Engineering Filter Regulator Kit (FRK), including parts list, installation instructions, and basic operation.
Preview Classic Buggy Field Retrofit Kit Wiring Schematic
Detailed wiring schematic for the Classic Buggy Field Retrofit Kit (FRK), including panel assembly and throttle assembly, for integration with an existing vehicle's electrical system.
Preview Secop FRK7.5G Compressor Technical Data and Specifications
Detailed technical specifications, performance data, and application notes for the Secop FRK7.5G compressor, covering 220-240V 50Hz and 208-230V 60Hz configurations.
Preview Neo FR Kit User Guide - Dental Implant Fixture Removal Tool
This user guide provides detailed information on the Neobiotech Neo FR Kit, a professional dental implant fixture removal tool. It covers product description, intended use, components, step-by-step instructions for use, sterilization procedures, maintenance, precautions, contraindications, and a comprehensive compatibility list with various implant systems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.