Kaito Tecsun Universal AC/DC USB Adapter AD-800 Instruction Manual

1. Product Overview

The Kaito Tecsun Universal AC/DC USB Adapter AD-800 is designed to provide power and charging capabilities for various Kaito and Tecsun radio models. This adapter features a 2-pin plug for wall outlets and a mini-USB connector for device compatibility. It is suitable for powering devices or charging rechargeable batteries within compatible radios.

This adapter is compatible with models including KA800, KA801, DE1123, DE1125, DE1126, PL360, PL390, PL380, and PL606. It can also be used with any device that has a mini-USB female jack for power and charging.

2. Setup Instructions

1. Connect to Power Outlet: Insert the 2-pin plug of the AD-800 adapter into a standard wall outlet (100-240 VAC, 50/60 Hz).

   

   Image: The Kaito Tecsun AD-800 adapter with its 2-pin wall plug visible, ready for insertion into an electrical outlet.

2. Connect to Device: Plug the mini-USB connector end of the adapter cable into the mini-USB port of your compatible radio or device.

   

   Image: The Kaito Tecsun AD-800 adapter showing the mini-USB connector at the end of its cable, ready to be plugged into a device.

3. Operating Instructions

Once the adapter is properly connected to both the wall outlet and your device, it will begin to supply power or charge the device's internal rechargeable batteries. No additional user interaction is typically required for basic operation.

• Ensure your device is turned off or in a charging-compatible mode if specified by the device's own manual.
• Monitor your device's charging indicator (if available) to confirm that charging is in progress.

4. Compatibility

The Kaito Tecsun Universal AC/DC USB Adapter AD-800 is specifically designed for the following radio models:

• Kaito KA Series: KA800, KA801
• Tecsun PL Series: PL360, PL380, PL390, PL606
• Other models: DE1123, DE1125, DE1126

Additionally, this adapter can be used to power and charge any device equipped with a standard mini-USB female jack, provided the device's power requirements match the adapter's output specifications.

5. Specifications

6. Maintenance

• Cleaning: Disconnect the adapter from the power outlet and device before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires, bent prongs, or cracked casing. Discontinue use if damage is observed.
• Environmental Conditions: Avoid exposing the adapter to moisture, rain, or excessive humidity.

7. Troubleshooting

• No Power/Charging:
  • Ensure the adapter is securely plugged into a functioning wall outlet. Try a different outlet to rule out an issue with the power source.
  • Verify that the mini-USB connector is firmly inserted into your device's port.
  • Confirm that your device is compatible with the adapter's specifications (5V, 500mA output).
  • Check the adapter cable for any visible damage.
• Static or Humming Noise:
  • If you experience static or humming, it may be due to interference from power lines or other electronic devices.
  • Try moving the radio or the adapter away from other electronic equipment.
  • Ensure the wall outlet is properly grounded.

8. Warranty and Support

This Kaito Tecsun Universal AC/DC USB Adapter AD-800 comes with a 90-day manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact Kaito customer service through their official channels. Refer to the packaging or Kaito's official website for contact information.