Introduction
Thank you for choosing the Amazon Basics 60-Inch Lightweight Tripod. This manual provides essential information for the proper setup, operation, and maintenance of your tripod. Designed for versatility and ease of use, this tripod is compatible with a wide range of devices, including DSLR cameras, digital cameras, still cameras, GoPro devices, and smartphone adapters (not included).
The Amazon Basics 60-Inch Lightweight Tripod, shown alongside its included black carrying bag, ready for transport or storage.
Safety Information
- Always ensure the tripod legs are fully extended and locked before mounting any equipment.
- Do not exceed the recommended maximum load weight of 6.6 lbs (3 kg) to prevent instability and potential damage.
- Avoid placing the tripod on uneven or unstable surfaces.
- Keep hands and fingers clear of moving parts, especially when adjusting leg sections or the center column.
- Do not leave the tripod unattended with heavy equipment mounted, especially in windy conditions.
What's in the Box
- Amazon Basics 60-Inch Lightweight Tripod
- Carrying Bag
Setup
- Unpack the Tripod: Carefully remove the tripod from its carrying bag and any protective packaging.
- Extend the Legs: Loosen the lever-locks on each leg section and extend the legs to the desired height. Ensure all sections are fully extended and the lever-locks are securely fastened.
- Adjust Leg Angles: Use the bracing locks to adjust the spread of the tripod legs for optimal stability on various terrains.
- Level the Tripod: Utilize the two built-in bubble view levels on the tripod head to ensure your setup is perfectly level for accurate shots.
- Attach Your Device: Secure your camera or compatible device to the quick-release mounting plate. Then, attach the quick-release plate to the tripod head, ensuring it clicks firmly into place.
This diagram highlights key features for precise adjustments, including two built-in bubble view levels for accurate leveling, a 1/4-inch screw on the quick-release plate for easy camera attachment, and lever-locks for adjusting the 3-section legs.
Operating Instructions
Height Adjustment
The tripod features adjustable-height legs and a center post. To adjust the height, loosen the lever-locks on the leg sections, extend or retract the legs, and then firmly close the locks. For fine-tuning, use the axial lifting hand crank to raise or lower the center column.
This visual guide demonstrates the tripod's adjustable height range, from a minimum of 23.2 inches (59 cm) to a maximum of 60 inches (152 cm) when the center post is fully extended. It also indicates a recommended maximum load weight of 6.6 lbs (3 kg) and an overall weight of 2.7 lbs (1.2 kg).
Head Movement
The 3-way head allows for tilt and swivel motion, providing both portrait and landscape options. Use the control knob for 360-degree panning to capture panoramic shots. The quick-release mounting plate ensures fast transitions between shots, allowing you to easily attach and detach your camera.
This image illustrates features designed for ease of use and stability, such as a hand grip for easy carrying, a control knob for 360-degree panning, a bracing lock that adjusts leg angles with a hook for added stability, and stable anti-slip feet.
A detailed view of the tripod's components, including the quick release head for fast camera mounting, an axial lifting hand crank for precise vertical adjustments, durable rubber feet for stability on various surfaces, and height adjustment buckles on the legs.
Official Product Video
Official product video demonstrating the features and portability of the Amazon Basics 60-Inch Lightweight Tripod.
Maintenance
- Cleaning: Wipe down the tripod with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: When not in use, collapse the tripod fully and store it in its included carrying bag to protect it from dust and scratches.
- Lubrication: Do not apply lubricants to the leg locks or head mechanisms unless specifically instructed by the manufacturer.
- Inspection: Periodically check all screws, bolts, and locks to ensure they are secure. Tighten any loose components as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tripod is unstable | Legs not fully extended/locked; uneven surface; overloaded. | Ensure all leg sections are fully extended and locks are secure. Place on a flat, stable surface. Reduce load if exceeding 6.6 lbs (3 kg). |
| Camera wobbles on head | Quick-release plate not securely attached; camera not tightened to plate. | Verify the quick-release plate is firmly seated and locked into the tripod head. Ensure your camera is tightly screwed onto the quick-release plate. |
| Leg sections stick or are difficult to extend/retract | Dirt or debris in leg mechanisms. | Clean the leg sections with a dry cloth. Avoid forcing the sections. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WT3540 |
| Product Dimensions | 24.1 x 4.84 x 4.33 inches (folded) |
| Item Weight | 2.93 pounds |
| Material | Aluminum |
| Maximum Height | 60 inches (152 cm) |
| Minimum Height | 23.2 inches (59 cm) |
| Weight Limit | 6.6 pounds (3 kg) |
| Tripod Head Type | Adjustable Head (3-way) |
| Special Feature | Adjustable, Built-in Bubble Levels, Quick-Release Plate |
Warranty and Support
For warranty information and customer support, please refer to the official Amazon Basics website or the warranty document included with your purchase. A digital copy of the warranty document can often be found on the product's Amazon listing page.
You can access the Warranty document (PDF) here.
