EGLO 89562A Shuko Two-Light Floor Lamp Instruction Manual

1. Important Safety Instructions

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

Ensure the power supply is disconnected before assembly, installation, or maintenance.
This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
Use only the specified bulb type and wattage: (2) 13W Spiral Medium CFL. Exceeding the recommended wattage may cause overheating and damage.
Do not operate the lamp with a damaged cord or plug. If damaged, contact a qualified electrician for repair.
Place the lamp on a stable, level surface to prevent tipping.
Keep flammable materials away from the light source.
Do not attempt to modify the lamp's electrical components.

2. Unpacking and Component Check

Carefully remove all components from the packaging. Inspect each part for any damage that may have occurred during shipping. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Package Contents:

Lamp Base
Lamp Pole Sections (if applicable, for multi-piece poles)
Lamp Shade (Brown/White)
Socket Assembly
Hardware Pack (screws, washers, etc., if applicable)
Instruction Manual

3. Assembly Instructions

Follow these steps to assemble your EGLO Shuko Floor Lamp. Ensure the power cord is unplugged from any outlet during assembly.

Attach the Lamp Base: Carefully screw the lowest pole section into the lamp base until secure. Do not overtighten.
Assemble Pole Sections: If the lamp pole comes in multiple sections, carefully screw them together in sequence, ensuring the electrical cord passes freely through each section.
Secure the Socket Assembly: Attach the socket assembly to the top of the assembled pole. Ensure all connections are firm.
Install the Lamp Shade: Place the brown/white shade onto the socket assembly. Secure it using the provided shade ring or fasteners, if applicable.
Insert Light Bulbs: Screw two (2) 13W Spiral Medium CFL bulbs into the sockets. Ensure bulbs are fully seated but do not overtighten.

Assembled EGLO 89562A Shuko Two-Light Floor Lamp with antique brown finish and brown/white shade

Figure 1: Fully assembled EGLO 89562A Shuko Two-Light Floor Lamp. This image shows the lamp's antique brown finish and the distinctive brown/white shade, ready for use.

4. Operation

Once assembled, plug the lamp's power cord into a standard electrical outlet. The lamp is typically operated via an inline foot switch or a rotary switch located on the lamp pole or socket. Locate the switch and press or turn it to illuminate the lamp.

Power On/Off: Use the integrated switch to turn the lamp on or off.
Bulb Type: This lamp uses two (2) 13W Spiral Medium CFL bulbs.

5. Maintenance

Regular maintenance will help prolong the life and appearance of your floor lamp.

Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to dust the lamp. For the antique brown finish, avoid abrasive cleaners. For the brown/white shade, a slightly damp cloth can be used if necessary, then dry immediately.
Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled completely before attempting to replace them. Unscrew the old bulbs and screw in new 13W Spiral Medium CFL bulbs.
Cord Inspection: Periodically inspect the power cord for any signs of damage, fraying, or overheating. If damage is found, discontinue use and seek professional repair.

6. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Lamp does not turn on.	No power to the outlet. Bulb is loose or burnt out. Switch is faulty.	Check if the outlet is working by plugging in another device. Check circuit breaker. Ensure bulbs are screwed in tightly. Replace bulbs if necessary. Contact customer support if the switch is suspected to be faulty.
Flickering light.	Loose bulb. Incorrect bulb type/wattage. Faulty bulb.	Tighten the bulb. Ensure you are using 13W Spiral Medium CFL bulbs. Replace the bulb.
Lamp is unstable.	Base not properly secured. Uneven surface.	Ensure all pole sections and the base are tightly assembled. Place the lamp on a flat, stable surface.

7. Specifications

Model Number: 89562A
Brand: EGLO
Finish Type: Antique Brown
Shade: Brown/White
Light Source: (2) Fluorescent, 13W Spiral Medium CFL (Compact Fluorescent Lamp)
Material: Metal
Power Source: Corded Electric
Mounting Type: Floor Mount, Freestanding
Item Weight: 18 pounds
Style: Antique, Contemporary, Modern

8. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official EGLO website. Do not attempt to repair the product yourself, as this may void the warranty and pose safety risks. For assistance, contact EGLO customer service with your model number (89562A) and purchase details.

	EGLO 74045 Floor Lamp - Assembly and Product Information Detailed assembly instructions and product overview for the EGLO 74045 floor lamp, including part identification and step-by-step guidance.
	EGLO CUITE 390063A/390064A Table Lamp Instructions Official assembly and usage instructions for the EGLO CUITE table lamp, models 390063A and 390064A. Learn how to install the bulb, attach the shade, and connect the power.
	EGLO Cascinetta Outdoor Floor Lamp Assembly Instructions Detailed assembly guide for the EGLO Cascinetta outdoor floor lamp (Art.Nr. 98714), including electrical connections and mounting steps. Features IP44 rating and E27 socket.
	EGLO B43137 TOWNSHEND 5 Floor Lamp Assembly Guide Comprehensive assembly instructions for the EGLO B43137 TOWNSHEND 5 floor lamp. Learn how to connect components, install bulbs, and set up your lighting fixture.
	EGLO Floor Lamp Assembly Instructions \| Models B901865, B901866, B901867 Detailed, step-by-step assembly guide for EGLO floor lamps, including models B901865, B901866, and B901867. Learn how to connect pole sections, attach the lamp head, and wire the electrical components safely. Visit EGLO for more lighting solutions.
	EGLO Floor Lamp - Operation and Assembly Guide (Models 901877-901939) Comprehensive guide for EGLO floor lamps, covering assembly steps, touch controls for ON/OFF, color temperature adjustment (2500K-4000K), and dimming (100%-25%). Includes technical specifications and model numbers.

EGLO 89562A