Williams AV EAR 008 Single Over-Ear Hook Headphone User Manual

Introduction

The Williams AV EAR 008 is a single over-ear hook headphone designed for clear audio reception. It is particularly suitable for individuals with mild to moderate hearing loss and is recommended for use with FM receivers and select IR receivers. This manual provides essential information for the proper setup, operation, and maintenance of your EAR 008 headphone.

Image of the Williams AV EAR 008 Single Over-Ear Hook Headphone, showing its over-ear design and 3.5mm mono plug.

Setup

Unpack the Headphone: Carefully remove the EAR 008 headphone from its packaging.
Identify the Audio Plug: The headphone features a 3.5mm mono plug at the end of its 1-meter cord.
Connect to Device: Insert the 3.5mm mono plug into the corresponding audio output jack of your compatible device, such as an FM receiver, IR receiver, or any device with a 3.5mm audio input jack. Ensure the plug is fully inserted for a secure connection.
Position on Ear: Gently place the over-ear hook of the headphone over one ear. Adjust for comfort and optimal sound delivery. The headphone is designed to hang on the outside of the ear.

Operating Instructions

Power On Device: Ensure your audio source device (e.g., FM receiver) is powered on and transmitting audio.
Adjust Volume: Use the volume controls on your connected audio source device to set the desired listening level. The EAR 008 headphone does not have integrated volume controls.
Listening: Once connected and volume is adjusted, audio will be delivered through the single earpiece.

Maintenance

Cleaning: To clean the headphone, gently wipe the plastic and rubber surfaces with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
Water Exposure: The EAR 008 headphone is not water resistant. Avoid exposing it to water, moisture, or excessive humidity to prevent damage.
Storage: When not in use, store the headphone in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cord.
Cord Care: Do not pull on the cord to disconnect the headphone. Always grasp the plug itself.

Troubleshooting

Problem	Possible Cause	Solution
No sound	Headphone not properly connected. Audio source device is off or muted. Volume on audio source device is too low.	Ensure the 3.5mm plug is fully inserted into the audio jack. Check if the audio source device is powered on and not muted. Increase the volume on your audio source device.
Low or distorted sound	Volume on audio source device is too low. Poor connection. Audio source device issue.	Increase the volume on your audio source device. Ensure the 3.5mm plug is securely connected. Test the headphone with another compatible audio source device to rule out a device issue.

Specifications

Model: EAR 008
Connectivity: Wired
Plug Type: 3.5mm Mono
Cord Length: 1 meter
Impedance: 32 Ohms
Frequency Range: 20 Hz - 20 kHz
Audio Driver Size: 23 Millimeters
Earpiece Shape: Over-Ear Hook
Material: Plastic, Rubber
Water Resistance: Not Water Resistant
Product Dimensions: 4.2 x 2.3 x 0.2 inches
Item Weight: 0.05 Pounds
Recommended Use: FM receivers and select IR receivers

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Williams AV directly through their official website. Keep your proof of purchase for warranty claims.

Manufacturer: Williams Sound (Williams AV)