Product Overview
The Kanlux Cyber TM 6 is an electronic programmable timer designed for controlling electrical appliances. It allows users to set specific ON/OFF times for various days of the week, providing convenience and energy saving for household or office use.
Figure 1: Kanlux Cyber TM 6 Electronic Timer. Features a digital display, control buttons for WEEK, HOUR, MINUTE, CLOCK, TIMER, ON/AUTO/OFF, RANDOM, MASTER CLEAR, and RES/RCL, and a standard European power outlet.
Safety Information
- Indoor Use Only: This device is intended for indoor use in dry conditions. Do not expose to moisture or extreme temperatures.
- Electrical Safety: Do not overload the timer. Ensure the connected appliance's power consumption does not exceed the timer's maximum rating. Always plug the timer into a properly grounded outlet.
- Cleaning: Disconnect from power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Children: Keep out of reach of children. This is not a toy.
Setup
Initial Power-up
Plug the Kanlux Cyber TM 6 into a standard wall outlet. The display will illuminate, and the timer will be ready for configuration.
Setting Current Time
- Press the CLOCK button.
- While holding CLOCK, press WEEK repeatedly to select the current day of the week (e.g., MO, TU, WE, TH, FR, SA, SU).
- While holding CLOCK, press HOUR repeatedly to set the current hour (24-hour format).
- While holding CLOCK, press MINUTE repeatedly to set the current minute.
- Release the CLOCK button. The time is now set and will be displayed.
Operating Instructions
Programming Timer Events
The timer allows setting up to 6 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Press the TIMER button to enter programming mode. The display will show "1 ON".
- Press WEEK to select the day(s) for the first ON event. Options include individual days, weekdays, weekends, or all days.
- Press HOUR and MINUTE to set the desired ON time for program 1.
- Press TIMER again. The display will show "1 OFF".
- Repeat steps 2 and 3 to set the desired OFF time for program 1.
- Continue pressing TIMER to cycle through "2 ON", "2 OFF", and so on, up to "6 OFF" to set additional programs.
- After setting all desired programs, press CLOCK to exit programming mode and return to the current time display.
ON/AUTO/OFF Mode
Press the ON/AUTO/OFF button to cycle through the operating modes:
- ON: The connected appliance is continuously ON, overriding all programmed settings.
- AUTO: The connected appliance operates according to the programmed ON/OFF times. This is the standard operating mode for automated control.
- OFF: The connected appliance is continuously OFF, overriding all programmed settings.
Random Function
Press the RANDOM button to activate or deactivate the random function. When active, the timer will randomly turn the connected appliance ON and OFF within a specified time window (e.g., 6 PM to 6 AM) to simulate occupancy. This function is typically used for security purposes.
Master Clear / Reset
To clear all programmed settings and reset the timer to its factory default state, press the MASTER CLEAR button using a pointed object (e.g., a pen tip). This will erase all time and program settings, requiring you to reconfigure the timer from scratch.
Recall / Cancel (RES/RCL)
The RES/RCL button is used to recall or cancel specific program settings during programming mode. Consult the on-screen prompts for its specific use during program editing.
Maintenance
Cleaning
Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the device.
Storage
Store the timer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or not responding. | No power; Timer not securely plugged in. | Ensure the timer is securely plugged into a live electrical outlet. Check the outlet with another device. |
| Appliance does not turn ON/OFF as programmed. | Incorrect operating mode; Incorrect program settings; Appliance power exceeds timer limits. | Check if the timer is in AUTO mode. Verify program settings (ON/OFF times, days). Ensure the connected appliance's power consumption is within the timer's specifications. |
| Timer settings are lost after a power outage. | No internal battery backup (if applicable); Master Clear button was pressed. | Reprogram the timer. Avoid accidentally pressing MASTER CLEAR. |
| Random function not working as expected. | Random function not activated; Current time is outside the typical random operation window. | Press the RANDOM button to activate it. Ensure the current time is within the typical operating hours for the random function (e.g., evening/night). |
Specifications
Figure 2: Kanlux Cyber TM 6 Electronic Timer Dimensions. Front view shows width 58mm and height 124mm. Side view shows depth 43mm.
| Feature | Detail |
|---|---|
| Brand | Kanlux |
| Model Number | 01016 |
| Color | White |
| Material | Plastic |
| Number of Programs | Up to 6 ON/OFF programs |
| Special Features | Random function, ON/AUTO/OFF modes, 24-hour display |
| Dimensions (approx.) | 124mm (H) x 58mm (W) x 43mm (D) |
| ASIN | B005GO2XO6 |
| EAN/UPC | 05905339010162 |
Warranty and Support
Manufacturer's Warranty
This Kanlux product comes with a manufacturer's warranty of 2 years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the official Kanlux customer support channels. Refer to the product packaging or the Kanlux website for the most current contact information.
