Power Stop K2935 Rear Z23 Carbon Fiber Brake Pads with Drilled & Slotted Brake Rotors Kit

Product Overview

The Power Stop Z23 Evolution Sport Brake Upgrade Kit is designed to enhance the braking power of your daily-driver vehicle. This kit provides a low-dust and noise-free upgrade compared to standard brake systems. It includes all necessary components for a complete brake job, ensuring improved performance and durability.

What's in the Box

• 2 Drilled and slotted brake rotors
• Brake pad sets (Z23 Evolution Sport carbon-fiber ceramic brake pads)
• Installation hardware
• High performance brake lubricant

Image: All components included in the Power Stop Z23 Evolution Sport Brake Upgrade Kit, featuring two drilled and slotted rotors, brake pad sets, and installation hardware.

Key Features

• Carbon-fiber ceramic compound: Significantly enhances braking performance compared to traditional ceramic brake pads.
• Low dust braking: Validated through on-vehicle 3rd party tests, showing on average 30% less dust versus OE.
• Dual layer high temp rubberized shims: Insulate noise for virtually silent braking.
• Drilled & Slotted performance rotors: Designed for maximum cooling and zinc plated for protection against rust.
• Engineered for synergy: Brake rotor, pad, and hardware are designed to work together to increase stopping power, improve durability, and eliminate dust.

Image: A close-up view of the carbon-fiber ceramic brake pads, highlighting their material composition for enhanced performance and durability.

Installation and Setup

Installation of brake components requires mechanical expertise and specialized tools. It is highly recommended that installation be performed by a qualified professional to ensure proper function and safety. Incorrect installation can lead to brake failure and serious injury.

Pre-Installation Check: Solid vs. Vented Rotors

Before ordering or installing, it is crucial to verify whether your vehicle requires solid or vented rotors, especially for models like certain Jeep and Chrysler vehicles where both types may exist for the same year. You can determine this by examining the side of your vehicle's current rotors.

Video: This video demonstrates how to identify the difference between solid and vented brake rotors by looking at their cross-section. This is important for selecting the correct replacement parts for your vehicle.

General Installation Steps (Consult a Professional):

1. Safely lift and support the vehicle. Remove the wheel.
2. Remove the brake caliper and old brake pads.
3. Remove the old brake rotor.
4. Clean the hub surface thoroughly to ensure proper seating of the new rotor.
5. Install the new Power Stop drilled and slotted rotor.
6. Install the new Power Stop Z23 Evolution Sport carbon-fiber ceramic brake pads and hardware. Apply high performance brake lubricant as directed.
7. Reinstall the brake caliper and wheel.
8. Repeat for all wheels being serviced.
9. Perform a proper brake system bleed if necessary, and conduct a bedding-in procedure for the new pads and rotors as per manufacturer recommendations.

Image: Close-up of hands installing premium hardware during a brake system upgrade, highlighting the detailed work involved in the process.

Operating Characteristics

Once installed, the Power Stop Z23 Evolution Sport Brake Kit will provide enhanced stopping power and a quiet, low-dust braking experience. The carbon-fiber ceramic pads are designed for severe-duty stopping power while maintaining everyday drivability. The drilled and slotted rotors help dissipate heat, maintaining consistent performance even under extreme conditions.

Image: A red car in motion on a scenic road, representing the recommended use of the brake kit for daily drivers seeking upgraded braking performance.

Image: A close-up view of a car's wheel and brake assembly, illustrating the benefit of low-dust brake pads in keeping wheels clean.

Maintenance

Regular inspection of your brake system is essential for safety and longevity. Check brake pads for wear, rotors for signs of warping or excessive scoring, and brake fluid levels periodically. Adhere to your vehicle manufacturer's recommended maintenance schedule. The zinc plating on the rotors helps prevent rust and corrosion, but regular cleaning can further extend their lifespan.

Image: A detailed view of a drilled and slotted brake rotor, showcasing its design for optimal cooling and performance.

Image: An exploded view diagram of a brake pad, highlighting the dual-layer rubberized shims designed to insulate noise for silent braking.

Troubleshooting

If you experience any issues with your brake system after installation, such as unusual noises, vibrations, or reduced braking performance, it is crucial to have the system inspected immediately by a qualified mechanic. Do not attempt to diagnose or repair complex brake issues yourself unless you are a certified professional.

Common Issues and Potential Causes:

• Squealing/Grinding Noise: Could indicate worn pads, improper installation, or foreign debris.
• Vibration/Pulsation: Often a sign of warped rotors or uneven pad wear.
• Soft Brake Pedal: May suggest air in the brake lines or a fluid leak.
• Reduced Braking Power: Can be caused by contaminated pads, overheating, or issues with the hydraulic system.

Always prioritize safety. If brake performance is compromised, cease driving the vehicle and seek professional assistance.

Specifications

Warranty and Support

For specific warranty information and technical support regarding your Power Stop K2935 Brake Kit, please refer to the documentation included with your purchase or visit the official Power Stop website. You can also contact Power Stop customer service directly for assistance with product inquiries, installation guidance, or troubleshooting.

Manufacturer: Power Stop

Website: www.powerstop.com (Please note: This is a placeholder URL. Refer to actual product documentation for correct contact information.)