Introduction
The Power Stop Z23 Evolution Sport Brake Upgrade Kit is designed to enhance the braking performance of your daily-driver. This kit aims to reduce brake dust and eliminate noise, providing a comfortable driving experience. It includes all necessary components for a complete brake job: perfectly matched drilled & slotted rotors, Z23 Evolution Sport carbon-fiber ceramic brake pads, upgraded hardware, and high-performance lubricant.
Key Features:
- Custom-matched components engineered for superior braking power.
- Z23 Carbon-Fiber ceramic formula for dust-free braking performance.
- Premium rubberized shims for virtually noise-free braking.
- Drilled & Slotted performance rotors for maximum cooling.
- Includes premium stainless steel hardware kit and ceramic brake lubricant for easy installation.
Image: Complete Power Stop K590 Brake Kit, showcasing the drilled and slotted rotors, carbon-fiber ceramic brake pads, and installation hardware.
What's in the Box
Your Power Stop K590 kit includes the following components:
- 2 Drilled and slotted brake rotors
- Brake pad sets (front)
- Installation hardware
- Ceramic brake lubricant
Image: All components included in the Power Stop K590 kit, ready for installation.
Setup and Installation
Installation of brake components should ideally be performed by a qualified mechanic. Ensure your vehicle is safely supported on jack stands before beginning any work. Always refer to your vehicle's service manual for specific torque specifications and procedures.
Identifying Rotor Type (Solid vs. Vented):
It is crucial to verify whether your vehicle requires solid or vented rotors, especially for certain models like some Jeep and Chrysler vehicles, which may have either type within the same year. You can determine this by examining the side profile of your existing rotors. Solid rotors will appear as a single, thick disc, while vented rotors will have internal fins or channels between two disc faces for cooling.
Video: This video demonstrates how to identify the difference between solid and vented brake rotors by looking at their side profiles. This is important for selecting the correct replacement parts for your vehicle.
Ensure you order the same type of rotor that is currently installed on your vehicle.
Image: A close-up of a mechanic installing a brake pad, highlighting the process of brake component replacement.
Operating Your New Brakes
After installation, it is recommended to follow a proper break-in procedure for your new brake pads and rotors. This typically involves a series of moderate stops from varying speeds to properly seat the pads to the rotors and optimize performance.
Performance Benefits:
- Enhanced Stopping Power: The Z23 Carbon-Fiber ceramic pads and drilled & slotted rotors work together to provide superior braking.
- Reduced Brake Dust: The ceramic formula minimizes dust accumulation, helping to keep your wheels cleaner.
- Quiet Operation: Premium rubberized shims are designed to absorb vibrations and reduce noise during braking.
- Improved Heat Dissipation: Drilled and slotted rotors help to vent gases and dissipate heat, maintaining consistent performance.
Image: Detail of the Carbon-Fiber Ceramic Pads, designed for severe-duty stopping power with everyday drivability.
Image: A close-up view of a drilled and slotted rotor, illustrating how these features help keep temperatures down and performance up.
Maintenance
Regular inspection of your brake system is essential for safety and longevity. Check brake pads for wear and rotors for signs of warping, cracking, or excessive scoring. The included ceramic brake lubricant should be applied to caliper slide pins and backing plates during installation to ensure smooth operation and prevent seizing.
Tips for Longevity:
- Avoid aggressive braking, especially during the initial break-in period.
- Periodically clean brake dust from wheels and calipers.
- Have your brake fluid checked and replaced according to your vehicle manufacturer's recommendations.
Image: An illustration of dual-layer rubberized shims, which insulate noise for virtually silent braking.
Troubleshooting
Common Issues and Solutions:
- Noise (Squealing/Grinding):
Ensure proper application of ceramic lubricant to contact points during installation. Verify that shims are correctly installed. If grinding, inspect pads for excessive wear or foreign objects. New pads may produce some noise during the initial break-in period.
- Incorrect Parts Received:
As noted in the "Setup and Installation" section, some vehicle models can use either solid or vented rotors. Always visually confirm the type of rotor currently on your vehicle before ordering to ensure compatibility and avoid receiving an incorrect kit. If you believe you have received the wrong parts, contact Power Stop customer support with your vehicle's year, make, model, and the type of rotors currently installed.
- Excessive Brake Dust:
While Z23 Carbon-Fiber ceramic pads are designed for low dust, some dust is normal. If dust is excessive, ensure proper break-in procedure was followed. Persistent excessive dust may indicate an issue with installation or component compatibility.
Specifications
| Brand | Power Stop |
| Model | K590 |
| Item Weight | 25.8 pounds |
| Product Dimensions | 14 x 14 x 10 inches |
| Vehicle Service Type | Car, Truck |
| Position | Front |
| Exterior Finish | Zinc Plated |
| OEM Part Number | K590 |
| UPC | 792088525253 |
Support
For further assistance, technical support, or warranty inquiries regarding your Power Stop K590 Brake Kit, please visit the official Power Stop website or contact their customer service department. Always provide your product model number (K590) and vehicle details when seeking support.
Official Power Stop Store: Power Stop Amazon Store