Hansa 00918101 Nova Basin Mixer Tap User Manual

1. Product Overview

The Hansa 00918101 Nova Basin Mixer Tap is a high-quality, chrome-finished faucet designed for cold or premixed water applications. It features a robust construction and user-friendly design, making it suitable for various basin installations.

Key features include:

• Hansanova DN 15 basin tap design.
• Efficient flow rate of 6 liters per minute at 3 bar pressure.
• Extended spout reach of 127 mm and a spout height of 205 mm for comfortable use.
• Ergonomic wing-shaped control handle for precise water flow adjustment.
• Durable anti-twist ceramic discs ensuring long-lasting, drip-free performance.

Figure 1: The Hansa 00918101 Nova Basin Mixer Tap, showcasing its chrome finish and wing-shaped handle.

2. Components

The Hansa 00918101 tap typically includes the following main components:

• Faucet body with integrated spout
• Wing-shaped control handle
• Ceramic cartridge with anti-twist discs
• Mounting hardware (nuts, washers, seals)
• Connection hoses (may be pre-attached or separate)

Figure 2: The Hansa 00918101 tap shown installed on a basin, illustrating its functional integration.

3. Installation Guide

This section provides general instructions for installing the Hansa 00918101 basin mixer tap. Professional installation is recommended.

1. Preparation: Ensure the water supply is turned off at the main stopcock. Clear the area around the basin.
2. Mounting: Insert the tap's threaded rod through the mounting hole in the basin. From underneath, secure the tap using the provided washer and mounting nut. Ensure the tap is correctly oriented.
3. Water Connections: Connect the water supply hoses to the tap's inlets. For cold or premixed water, ensure the single inlet is securely connected to the appropriate supply line. Use thread sealant tape if necessary.
4. Testing: Slowly turn on the main water supply. Check for any leaks at all connection points. If leaks are present, tighten connections as needed.
5. Functionality Check: Operate the tap handle to ensure smooth water flow and proper shut-off.

Figure 3: Technical diagram showing the dimensions and connection points of the Hansa 00918101 tap, useful for installation planning.

4. Operating Instructions

The Hansa 00918101 tap is designed for simple operation:

• To turn on the water, rotate the wing-shaped handle.
• The flow rate is controlled by the degree of rotation.
• To turn off the water, rotate the handle back to its original closed position.

5. Maintenance

To ensure the longevity and appearance of your Hansa tap, follow these maintenance guidelines:

• Cleaning: Clean the chrome surface regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures. Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the finish.
• Aerator: Periodically unscrew and clean the aerator at the tip of the spout to remove any mineral deposits or debris that may affect water flow.
• Ceramic Discs: The ceramic discs are designed for durability and typically require no maintenance. If a drip occurs, it may indicate a need for professional service or cartridge replacement.

6. Troubleshooting

Below are common issues and their potential solutions:

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Hansa website. Keep your proof of purchase for any warranty claims.