Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Polyconcept Spirit of St. Louis Wooden Alarm Clock CD Radio. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Important Safety Information
- Do not expose this appliance to rain or moisture.
- Do not block any ventilation openings.
- Ensure proper battery installation and disposal.
- Use only attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
Product Overview
The Polyconcept Spirit of St. Louis Wooden Alarm Clock CD Radio combines an AM/FM radio, CD player, and alarm clock functionality within a classic wooden design. It features an analog clock display and various controls for audio playback and timekeeping.

Figure 1: Front view of the Polyconcept Spirit of St. Louis Wooden Alarm Clock CD Radio. The top unit features the analog clock, radio tuner, CD controls, and main volume. The bottom unit houses the subwoofer with its own volume and phase controls.
Controls and Components
- Analog Clock: Displays current time with four hands.
- Radio Tuner Dial: For selecting AM/FM frequencies.
- CD Compartment: Top-loading CD player.
- CD Controls: Play/Pause, Stop, Skip Up/Down, Repeat, Program.
- Volume Control (Main Unit): Adjusts audio output for radio and CD.
- AM/FM/FM Stereo Band Switch: Selects radio band and stereo mode.
- Alarm Set Button: For setting the alarm time.
- Time Set Button: For setting the current time.
- Snooze Button: Temporarily silences the alarm.
- 3.5 mm Earphone Jack: For private listening.
- Subwoofer Unit: Separate unit with its own controls.
- Subwoofer Volume (Gain) Control: Adjusts subwoofer output.
- Subwoofer Phase Control (0°/180°): Adjusts subwoofer phase.
- Subwoofer On/Off Switch: Activates or deactivates the subwoofer.
- Power Indicator LED: Illuminates when the unit is powered on.
Setup
1. Unpacking
Carefully remove the unit from its packaging. Retain the packaging materials for future transport or storage.
2. Power Connection
The unit requires batteries for both the clock and radio functions.
- Clock Battery: The analog clock requires one (1) AA battery (included). Locate the battery compartment, typically on the back or bottom of the main unit, and insert the AA battery, observing polarity.
- Radio Batteries: The radio function requires six (6) C-cell batteries (not included). Locate the battery compartment for the radio, usually on the back or bottom of the main unit, and insert the C-cell batteries, observing polarity.
Alternatively, the unit can be powered via an AC adapter (not specified if included or optional, assume standard AC power input if available, otherwise battery-only for radio). If an AC adapter port is present, connect the appropriate AC adapter to the unit and a wall outlet.
3. Antenna Setup
For optimal FM reception, extend the telescopic FM antenna. For AM reception, the unit has a built-in AM antenna; try rotating the unit for better reception if needed.
Operating Instructions
Setting the Time
- Press and hold the Time Set button.
- While holding the Time Set button, rotate the Tuning Control knob to adjust the clock hands to the correct time.
- Release the Time Set button.
Setting the Alarm
- Press and hold the Alarm Set button.
- While holding the Alarm Set button, rotate the Tuning Control knob to set the desired alarm time.
- Release the Alarm Set button.
- Select your desired wake-up source using the BUZZER/FM/RADIO/CD switch.
- Ensure the ON/ALARM switch is set to ON for the alarm to activate.
Radio Operation
- Set the function switch to RADIO.
- Select the desired band (AM or FM) using the AM/FM/FM Stereo band switch. For FM Stereo, ensure the switch is set to FM Stereo.
- Rotate the Tuning Control knob to select your desired radio station.
- Adjust the main Volume Control to your preferred listening level.
CD Player Operation
- Set the function switch to CD.
- Open the CD compartment cover and carefully place a CD onto the spindle, label side up. Close the cover.
- Press the PLAY/PAUSE button to begin playback.
- Press PLAY/PAUSE again to pause playback; press it once more to resume.
- Press the STOP button to stop playback.
- Use the SKIP UP (>>) and SKIP DOWN (<<) buttons to navigate between tracks.
- Press the REPEAT button to repeat the current track or the entire CD.
- Programmable Memory (16 CD tracks):
- In STOP mode, press the PROGRAM button.
- Use SKIP UP/DOWN to select the desired track.
- Press PROGRAM again to confirm and add the track to the program list.
- Repeat for up to 16 tracks.
- Press PLAY/PAUSE to start programmed playback.
Subwoofer Operation
- Ensure the subwoofer unit is connected to the main unit (if applicable, connection type not specified, assuming integrated or simple cable).
- Flip the ON/OFF switch on the subwoofer unit to ON. The Power indicator LED should illuminate.
- Adjust the Volume (Gain) Control on the subwoofer to balance the bass output with the main unit's sound.
- Experiment with the Phase Control (0°/180°) switch to find the setting that provides the most coherent bass response in your listening environment.
Earphone Jack
Insert a 3.5 mm stereo earphone plug into the EARPHONE jack for private listening. Audio will be muted from the main speakers when earphones are connected.
Maintenance
Cleaning
Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish. For the CD lens, use a specialized CD lens cleaner if necessary.
Battery Replacement
Replace the AA battery for the clock annually or when the clock display becomes dim or inaccurate. Replace the C-cell batteries for the radio when sound quality degrades or the unit fails to power on. Always dispose of old batteries responsibly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Batteries are depleted or incorrectly installed. | Check battery polarity and replace with fresh batteries. |
| No sound from radio/CD. | Volume is too low; earphones connected; incorrect function mode. | Increase volume; disconnect earphones; select correct function (RADIO/CD). |
| Poor radio reception. | Antenna not extended; unit position. | Extend FM antenna; rotate unit for better AM reception. |
| CD skips or does not play. | CD is dirty or scratched; CD inserted incorrectly. | Clean CD with a soft cloth; ensure CD is inserted label side up. |
| Alarm does not sound. | Alarm not set; alarm volume too low; ON/ALARM switch off. | Verify alarm time; increase volume; set ON/ALARM switch to ON. |
Specifications
- Model: 841673
- Brand: Polyconcept
- Display Type: Analog
- Functions: AM/FM Radio, CD Player, Alarm Clock
- Clock Power: 1 x AA Battery (Included)
- Radio Power: 6 x C-cell Batteries (Not Included)
- Subwoofer Output: 5W
- Earphone Jack: 3.5 mm
- Material: Wood
- Item Weight: Approximately 15 pounds
Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Polyconcept customer service. Contact details are typically available on the manufacturer's website or product packaging.