Lasko Oscillating Ceramic Tower Space Heater

1. Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

• Direct Connection: Always plug heaters directly into a 120V wall outlet/receptacle. Never use with an extension cord, power strip, surge protector, multiple outlet adapter, cord reel, or outlet-type air freshener. Using such devices may create a fire hazard.
• Secure Connection: Ensure the heater plug fits tightly into the outlet before each use. During use, check to make certain the heater plug is not overheating. If necessary, have a qualified electrician check and/or replace the wall outlet.
• Polarized Plug: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Overheat Protection: The heater is equipped with built-in overheat protection that automatically shuts off the unit if it becomes too hot.
• Cool-Touch Exterior: The exterior of the heater is designed to remain cool to the touch during operation, enhancing safety.
• Placement: Keep the heater away from flammable materials such as furniture, pillows, bedding, papers, clothes, and curtains. Maintain at least a 3-foot (0.9 meter) clearance from the front, sides, and rear of the heater.
• Supervision: Do not leave the heater operating unattended, especially around children or pets.

2. Product Overview

The Lasko Oscillating Ceramic Tower Space Heater Model 5309 is a slim, portable heating solution designed to provide comfort in small to medium-sized rooms. Its ceramic heating element delivers efficient warmth, while the oscillating function helps distribute heat evenly. The unit features user-friendly electronic controls for temperature and heat settings, along with important safety features.

Front view of the Lasko Oscillating Ceramic Tower Space Heater Model 5309, showcasing its slim design and control panel at the top.

Key Features:

• Compact Design: Stands 16 inches tall and 6 inches wide, ideal for floor or tabletop use.
• Adjustable Thermostat: Electronic thermostat allows temperature adjustment from 65°F to 85°F.
• Two Quiet Heat Settings: Choose between high and low heat for personalized comfort.
• Widespread Oscillation: Optional oscillation feature distributes warm air across a wider area.
• Portability: Lightweight (approximately 4.6 lbs) with a molded carrying handle for easy relocation.
• Built-in Safety: Includes overheat protection and a cool-touch exterior.

3. Setup

1. Unpack: Carefully remove the heater from its packaging. Retain packaging for off-season storage.
2. Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater to allow for proper airflow and prevent fire hazards. Do not block air intakes or exhaust openings.
3. Power Connection: Plug the heater directly into a 120V AC wall outlet. Do not use extension cords or power strips.

4. Operating Instructions

The Lasko 5309 heater features intuitive controls located on the top panel.

Top control panel with buttons for Power, Oscillate, and Temperature, along with indicator lights for heat levels and thermostat settings.

1. Power On/Off: Press the Power button to turn the heater on or off. A red indicator light will illuminate when the heater is active.
2. Select Heat Setting: Use the dial or button (depending on model variation) to select your desired heat output:
   • Fan Only: Provides air circulation without heat.
   • Low Heat (1): Provides a lower level of heat.
   • High Heat (2): Provides maximum heat output.
3. Adjust Thermostat: Use the Temp button or dial to set the desired room temperature between 65°F and 85°F. The heater will cycle on and off to maintain this temperature.
4. Activate Oscillation: Press the Oscillate button to enable the widespread oscillation feature, which moves the heater from side to side to distribute heat more broadly. Press again to stop oscillation.

Demonstration Videos:

5. Maintenance

• Cleaning: Always unplug the heater before cleaning. Use a soft cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water or liquids enter the interior of the heater.
• Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.

6. Troubleshooting

• Heater Does Not Turn On:
  • Check if the power cord is securely plugged into a functioning 120V outlet.
  • Ensure the power button is pressed.
  • Verify that the thermostat is set to a temperature higher than the current room temperature.
• Heater Shuts Off Unexpectedly:
  • This unit is equipped with an overheat protection feature. If the heater overheats, it will automatically shut off. Unplug the heater, wait 10 minutes for it to cool down, then plug it back in and restart.
  • Check for any obstructions to the air intake or exhaust. Clear any dust or debris.
• No Heat Output:
  • Confirm that a heat setting (Low or High) is selected, not just the fan-only mode.
  • Adjust the thermostat to a higher setting.

7. Specifications

Image showing the dimensions of the Lasko 5309 Ceramic Tower Heater.

8. Warranty and Support

This Lasko heater is covered by a 3-year limited warranty from the date of purchase. For warranty claims, technical support, or replacement parts, please contact Lasko customer service directly.

Please refer to the official Lasko website or your product packaging for the most current contact information and detailed warranty terms.