Product Overview
The TotalPond 3600 GPH Waterfall Pump is engineered for high performance in water features, capable of moving large volumes of water to create dynamic effects. Its wet bearing motor is designed for energy efficiency and quiet operation, allowing you to enjoy the sounds of flowing water without motor noise. This pump includes a pumpshield to protect it from dirt and debris, extending its operational life. The 3600 GPH model is suitable for cascading waters up to 12 feet in height and has a maximum pumping height of 19 feet. It is compatible with 1-1/2 inch and 2 inch tubing and comes with a 16-foot power cord.
Image: TotalPond 3600 GPH Waterfall Pump, showcasing its compact design and included fittings.
Setup and Installation
Proper installation ensures optimal performance and longevity of your TotalPond Waterfall Pump. Follow these steps for a successful setup:
- Placement: Submerge the pump completely in your pond, basin, skimmer box, or pump vault. Ensure it is placed on a stable, level surface to prevent tipping.
- Tubing Connection: The pump is compatible with 1-1/2 inch and 2 inch I.D. (Inner Diameter) tubing. Select the appropriate adapter for your tubing size. Securely attach the tubing to the pump's outlet.
- Pumpshield Installation: Place the pump inside the provided mesh barrier pumpshield. This helps prevent larger debris from entering and clogging the pump, extending its life.
- Power Connection: Route the 16-foot power cord safely to a grounded electrical outlet. Ensure the cord is not pinched or damaged. Do not plug in the pump until it is fully submerged in water.
- Waterfall Integration: If using for a waterfall, ensure the tubing leads to your waterfall spillway or feature. The pump is designed to support cascading waters up to 12 feet in height.
Image: Demonstrates connecting the corrugated tubing to the pump, highlighting the ease of installation.
Image: A person placing the pump into the protective mesh pumpshield bag.
Operating Instructions
Once installed and fully submerged, the TotalPond Waterfall Pump operates continuously to circulate water. Ensure the pump is always submerged in water during operation to prevent damage.
Flow Rate and Head Height
The pump's flow rate decreases as the vertical lifting height (head height) increases. Refer to the flow chart below for expected performance:
Image: A diagram illustrating the pump's flow rate (GPH) at various lifting heights (feet).
- 0 ft. Head: 3600 GPH
- 1 ft. Head: 3480 GPH
- 5 ft. Head: 2770 GPH
- 10 ft. Head: 2009 GPH (Recommended Performance)
- 12 ft. Head: 1550 GPH
- 18.3 ft. Head: 0 GPH (Maximum Lifting Height)
The pump's internal design facilitates self-cleaning by allowing larger debris to exit through the discharge and finer particles to flow out the rear, ensuring continuous cleaning of shafts and bearings. A back-spitting feature also helps cool the pump during operation.
Maintenance
Regular maintenance is crucial for the longevity and efficient operation of your TotalPond Waterfall Pump. The pump is designed for easy maintenance without the need for special tools.
- Pumpshield Cleaning: Periodically remove the pump from the water and inspect the mesh pumpshield. Clean any accumulated debris to ensure unrestricted water flow into the pump.
- Impeller and Housing Cleaning: Disassemble the pump housing (no tools required) to access the impeller. Remove any debris, algae, or mineral buildup from the impeller and its chamber. The flex impeller design aids in preventing clogs.
- Shaft and Bearings: The pump's design promotes self-cleaning of the ceramic shaft and bearings. However, during cleaning, visually inspect these components for any wear or damage.
- Winterization: In regions with freezing temperatures, remove the pump from the pond before the first hard freeze. Clean it thoroughly and store it in a frost-free location submerged in a bucket of water to keep seals hydrated.
Image: A person demonstrating the easy disassembly of the pump for cleaning, showing no tools are needed.
Image: The pump disassembled into its main components (housing, impeller, motor) for thorough cleaning, highlighting enhanced reliability features.
Troubleshooting
If your TotalPond Waterfall Pump is not operating as expected, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not running | No power; clogged impeller; damaged motor. | Check power supply and GFCI outlet. Disconnect power, then clean impeller and housing. If still not running, motor may be damaged and require replacement. |
| Reduced water flow | Clogged pumpshield or impeller; kinked or obstructed tubing; insufficient water level. | Clean pumpshield and impeller. Inspect tubing for kinks or blockages. Ensure pump is fully submerged and water level is adequate. |
| Pump making unusual noise | Debris in impeller; pump not fully submerged; worn impeller or shaft. | Disconnect power and clean impeller. Ensure pump is fully submerged. If noise persists, inspect impeller and ceramic shaft for wear and replace if necessary. |
| Excessive foaming in pond | New pond syndrome; excess organic waste; chemical imbalance. | Perform partial water changes. Ensure adequate filtration (bog filter, if applicable). Test water parameters and adjust as needed. |
Image: Close-up view of the pump's self-cleaning design, showing how debris is managed to prevent clogging.
Specifications
- Brand: TotalPond
- Model: 871980410406
- Style: 3600 GPH Waterfall Pump
- Material: Plastic
- Color: Black
- Product Dimensions (L x W x H): 7.48" x 6.54" x 13.5"
- Item Weight: 6.01 Pounds
- Power Source: Corded Electric
- Voltage: 120 Volts
- Maximum Flow Rate: 3600 GPH (60 Gallons Per Minute)
- Maximum Lifting Height: 19 Feet
- Compatible Tubing: 1-1/2 inch and 2 inch I.D.
- Power Cord Length: 16 feet
- Manufacturer: Geo Global Partners
- UPC: 871980410406
Image: Detailed dimensions of the TotalPond 3600 GPH Waterfall Pump.
Warranty and Support
For warranty information or technical support, please contact TotalPond customer service. Keep your purchase receipt as proof of purchase. Extended protection plans may also be available for additional coverage.
Visit the official TotalPond website for more resources and contact information: TotalPond Store