CORONA LIGHTING CL-612-GR Low Voltage 12V Area Light Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your CORONA LIGHTING CL-612-GR Low Voltage 12V Area Light. Please read this manual thoroughly before installation and retain it for future reference.

The CL-612-GR is a durable, low-voltage outdoor area light designed for landscape illumination. It features a die-cast aluminum housing with a green polyester UV powder-coated finish and a clear tempered glass disc lens, providing reliable performance in various outdoor conditions.

2. Safety Information

Always follow basic safety precautions when installing or working with electrical equipment to reduce the risk of fire, electric shock, and personal injury.

• Ensure power is disconnected at the main transformer before installation or servicing.
• This fixture is designed for 12V low voltage systems only. Do not connect to 120V AC.
• All wiring connections must be made in accordance with local electrical codes.
• Use only UL Listed components for your low voltage lighting system.
• Do not operate the fixture with a damaged lens or housing.
• Keep children away from the installation area.

3. Package Contents

Verify that all components are present before beginning installation:

• CL-612-GR Area Light Fixture (with prewired 3-foot direct burial cable)
• Cast Aluminum Stem with 1/2" NPT
• Ground Spike

4. Setup and Installation

Follow these steps for proper installation of your CL-612-GR area light:

1. Prepare the Installation Site: Choose a location for the light fixture that provides the desired illumination and is suitable for ground installation. Ensure the area is clear of underground utilities.
2. Assemble the Fixture: Attach the ground spike to the cast aluminum stem. Then, securely attach the light fixture to the stem. The stem features a 1/2" NPT for connection.
3. Install the Fixture: Insert the assembled fixture, with the ground spike, firmly into the ground at the desired location. Ensure it is stable and upright.
4. Wiring: The fixture comes prewired with a 3-foot direct burial cable. Connect this cable to your existing low-voltage landscape lighting system's main cable using appropriate UL Listed low-voltage cable connectors (not included). Ensure all connections are watertight and secure.
5. Lamp Installation (if not pre-installed): The fixture is designed for a 12V T3 halogen lamp, 20W maximum. Carefully insert the lamp into the socket. Avoid touching the glass bulb with bare hands; use a clean cloth or gloves.

An image of the CORONA LIGHTING CL-612-GR low voltage area light, featuring a green aluminum cylinder housing, a clear tempered glass disc lens, and a stem for ground installation.

For optional mounting hardware or alternative installation methods, refer to CORONA LIGHTING accessories and parts documentation.

5. Operating Instructions

The CL-612-GR area light operates as part of a 12V low-voltage landscape lighting system. Once properly installed and connected to a compatible low-voltage transformer, the light will activate according to the transformer's settings (e.g., timer, photocell, or manual switch). The product specifications indicate a 'Remote Control' method, which typically refers to the control of the overall low-voltage system rather than the individual light fixture itself.

• Ensure your low-voltage transformer is powered on.
• Adjust the transformer's timer or photocell settings as desired for automatic operation.
• If your system includes a remote control, use it to switch the entire low-voltage circuit on or off.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your area light.

• Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners or solvents.
• Lamp Replacement: The fixture is designed for easy lamp replacement. To replace the lamp, ensure power is off at the transformer. Carefully remove the top housing or lens assembly to access the lamp. Replace with a new 12V T3 halogen lamp (20W max) or a compatible T3 xenon lamp. Refer to a lamp guide for specific xenon lamp compatibility. Reassemble the fixture, ensuring all seals are properly seated to maintain weather resistance.
• Wiring Inspection: Annually inspect all wiring connections for corrosion or damage. Repair or replace as necessary.

7. Troubleshooting

If your area light is not functioning correctly, refer to the following common issues and solutions:

• Light does not turn on:
  • Check if the low-voltage transformer is powered on and functioning.
  • Verify all cable connections are secure and free of corrosion.
  • Ensure the lamp is correctly seated in its socket and is not burnt out. Replace if necessary.
  • Check for any breaks or damage in the low-voltage cable run.
• Light flickers or is dim:
  • This may indicate a loose connection or a failing lamp. Inspect connections and replace the lamp.
  • Ensure the total wattage of all lights connected to the transformer does not exceed its capacity.
• Water inside the fixture:
  • Ensure the lens and housing are properly sealed after lamp replacement or maintenance.
  • Check for cracks in the lens or housing and replace the fixture if damaged.

If problems persist, contact CORONA LIGHTING customer support.

8. Specifications

9. Warranty and Support

CORONA LIGHTING products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official CORONA LIGHTING website.

For technical assistance, replacement parts, or any questions regarding your CL-612-GR area light, please contact CORONA LIGHTING customer support through their official channels. When contacting support, please have your model number (CL-612-GR) and purchase information readily available.