Home Basics Steel Space Saver Bathroom Shelf (Model SS10059)

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Home Basics Steel Space Saver Bathroom Shelf. Please read these instructions thoroughly before assembly and retain for future reference. This unit is designed to utilize unused vertical space over most standard toilets, offering three shelves for organized storage.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble on a soft, clean surface to prevent scratches.
• Do not overload shelves. The maximum weight capacity is 10 pounds per shelf.
• Periodically check all connections to ensure they remain tight.
• This unit is designed for indoor use only.
• Keep small parts away from children during assembly.

Package Contents

Verify that all components listed below are included in your package:

• Main Frame Sections (Left and Right)
• Shelf Panels (3)
• Crossbars/Support Rods
• Assembly Hardware (Screws, Washers, Allen Wrench)
• Non-Skid Feet

Assembly Instructions

Follow these steps carefully for proper assembly:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent damage.
2. Identify Parts: Refer to the diagrams below to identify each component and its orientation.
3. Attach Side Frames: Connect the main side frames using the provided crossbars. Ensure all holes align before tightening any screws.
4. Install Shelves: Securely attach the three shelf panels to the frame at the designated heights.
5. Tighten All Connections: Once all parts are in place, carefully tighten all screws using the included Allen wrench. Do not overtighten to avoid stripping.
6. Place Unit: Position the assembled space saver over your toilet. Ensure it is stable and level.

This image displays the overall dimensions of the Home Basics Steel Space Saver, measuring approximately 23 inches wide, 11.5 inches deep, and 66.5 inches high. These measurements are crucial for ensuring the unit fits correctly in your bathroom space, particularly over a standard toilet.

This graphic highlights the open shelving design and slim profile of the space saver, illustrating how it efficiently utilizes vertical space without obstructing the toilet area.

This graphic emphasizes the three-tier structure and the inclusion of non-skid feet, which provide stability and protect bathroom floors.

Usage Guidelines

• Place items evenly on shelves to maintain balance and prevent tipping.
• Avoid placing excessively heavy objects on the unit. Adhere to the maximum weight capacity of 10 pounds per shelf.
• This unit is designed for storage of bathroom essentials such as toiletries, towels, and decorative items.

This image shows the Home Basics Steel Space Saver in a bathroom setting, positioned over a toilet. The shelves are utilized for storing various items like small plants, a mirror, toilet paper, and bath brushes, demonstrating its practical application.

Care and Maintenance

• Wipe the unit with a dry cloth to clean.
• Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish.
• Regularly check for any loose screws and tighten them as needed to maintain stability.

Troubleshooting

Unit is Wobbly:

• Ensure all screws are securely tightened.
• Verify the unit is placed on a flat, level surface.
• Check if the non-skid feet are properly installed and making full contact with the floor.

Parts Do Not Align:

• Double-check that you are using the correct parts for each step as per the instructions.
• Loosen all screws slightly, adjust the alignment, and then retighten.

Specifications

Warranty and Support

For warranty information or product support, please contact Home Basics customer service. Keep your purchase receipt for proof of purchase.

For further assistance, visit the Home Basics Store.