SkylinkHome SK-9 Wireless Motion Sensor & Dimmable Light Socket Kit User Manual

1. Introduction

The SkylinkHome SK-9 kit provides wireless home automation for lighting, combining a motion sensor (ID-318) and a screw-in dimmer (LX-318). This system allows for convenient, automated control of lights based on motion detection, enhancing both comfort and energy efficiency. It is designed for indoor use.

Image 1: SkylinkHome SK-9 Wireless Motion Sensor and Screw-in Dimmer Kit components.

2. Product Overview and Features

The SK-9 kit includes two main components:

• Motion Sensor (ID-318): Detects movement to trigger lighting.
• Screw-In Dimmer (LX-318): A light socket that allows a standard light bulb to be wirelessly controlled and dimmed.

Key features of the SkylinkHome SK-9 system include:

• Easy DIY Installation: Designed for straightforward setup without professional assistance.
• Ambient Light Sensor (ALS): Automatically adjusts lighting based on natural light levels, turning lights on or off as needed.
• Wide Compatibility: Works with both Incandescent and CFL bulbs.
• Extended Wireless Range: Offers up to 500 feet of wireless range in open areas, allowing control from a distance (with compatible SkylinkHome Remote Controls, sold separately).
• Adjustable Motion Sensor: Provides a motion detection range of up to 40 feet with adjustable sensitivity settings.

3. Package Contents

The SkylinkHome SK-9 kit typically includes:

• 1 x SkylinkHome Motion Sensor (ID-318)
• 1 x SkylinkHome Screw-In Dimmer (LX-318)
• Mounting hardware for the motion sensor
• User Manual

4. Setup Instructions

Follow these steps to set up your SkylinkHome SK-9 kit:

1. Install the Screw-In Dimmer (LX-318):
   • Ensure the power to the light fixture is turned OFF at the circuit breaker.
   • Screw the LX-318 dimmer into a standard light socket.
   • Screw your incandescent or CFL bulb into the LX-318 dimmer.
   • Restore power to the light fixture.
2. Install the Motion Sensor (ID-318):
   • The motion sensor is battery-powered (batteries included and required).
   • Mount the motion sensor on a wall using the provided hardware. Choose a location where it can effectively detect motion within your desired area, keeping in mind its 40-foot range.
   • Adjust the sensor's angle for optimal coverage.
3. Pairing the Motion Sensor with the Dimmer:
   • Refer to the detailed pairing instructions included in the individual component manuals for the ID-318 and LX-318. Generally, this involves putting the dimmer into a learning mode and then activating the motion sensor.
   • Once paired, the motion sensor will wirelessly communicate with the dimmer to control the light.

5. Operating Instructions

Once set up, the SkylinkHome SK-9 kit operates automatically:

• Motion Detection: When the motion sensor detects movement within its adjustable 40-foot range, it sends a signal to the paired screw-in dimmer.
• Automatic Lighting: The dimmer will then turn on the connected light bulb.
• Ambient Light Sensor (ALS): The motion sensor's ALS feature can be configured to prevent lights from turning on during daylight hours, saving energy.
• Automatic Shut-off: The light will automatically turn off after a preset duration (e.g., 5, 30, or 60 minutes) if no further motion is detected.

6. Motion Sensor Settings

The motion sensor (ID-318) offers customizable settings:

• Sensitivity Adjustment: Adjust the sensor's sensitivity to motion to prevent false triggers or ensure detection in specific areas. Refer to the ID-318 manual for detailed instructions on adjusting this setting.
• Ambient Light Sensor (ALS): The ALS can be enabled to only activate the light when the ambient light level is low (e.g., at night or in a dark room). This helps conserve energy during the day.
• Auto Shut-off Timer: Set the duration for which the light remains on after motion is no longer detected. Common settings include 5, 30, or 60 minutes.

7. Energy Saving Features

The SkylinkHome SK-9 kit is designed with energy efficiency in mind:

• Automated Lighting: Lights turn on only when needed due to motion, and turn off automatically after a set period of inactivity.
• Ambient Light Sensing: Prevents unnecessary lighting during daylight hours.
• Reduced Phantom Load: When used with compatible SkylinkHome plug-in receivers (not included in this kit), the system can completely cut power to electronics when turned off, eliminating standby power consumption.

8. Maintenance

• Battery Replacement: The motion sensor (ID-318) is battery-powered. Replace batteries as needed to ensure continuous operation. Refer to the ID-318 manual for battery type and replacement instructions.
• Cleaning: Wipe the motion sensor and dimmer with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Bulb Compatibility: Ensure you use compatible Incandescent or CFL bulbs with the screw-in dimmer.

9. Troubleshooting

• Light not turning on/off:
  • Check if the light fixture has power.
  • Ensure the bulb is correctly screwed into the dimmer and is functional.
  • Verify the motion sensor batteries are not depleted.
  • Confirm the motion sensor and dimmer are properly paired. Re-pair if necessary.
  • Check the motion sensor's placement and angle to ensure it covers the desired area.
  • If the light fixture is controlled by a wall switch, ensure the wall switch is in the 'ON' position. Some users have found that toggling the wall switch to 'OFF' and then back to 'ON' can reset the transmitter mode, allowing the motion sensor to function correctly. The sensor will have no effect if the transmitter is in the 'ON' mode and not in the 'OFF' mode for motion detection.
• False triggers or no detection:
  • Adjust the motion sensor's sensitivity setting.
  • Ensure there are no heat sources or air currents (e.g., vents, windows) directly in the sensor's field of view that could cause false triggers.
  • Check the Ambient Light Sensor (ALS) setting; if it's enabled, the light won't turn on during bright conditions.
• Limited wireless range:
  • Ensure there are no major obstructions (thick walls, metal objects) between the motion sensor and the dimmer.
  • The stated range of 500 feet is for open areas; actual range may vary indoors.

10. Specifications

11. Warranty and Support

This SkylinkHome SK-9 kit comes with a 1 Year Warranty from the manufacturer.

For technical support, troubleshooting assistance, or warranty claims, please contact Skylink customer service. Refer to the product packaging or the official Skylink website for the most current contact information.

You can also visit the SKYLINK Store on Amazon for additional product information and support resources.