1. Introduction
Thank you for choosing the Hozelock 30m Compact Hose Reel. This manual provides essential information for the safe and efficient use of your new hose reel. Please read these instructions carefully before assembly and operation, and retain them for future reference.
2. Product Overview
The Hozelock 30m Compact Hose Reel (Model 2410) is designed for convenient and efficient garden watering. Its compact and freestanding design makes it easy to store and move around your garden.
2.1 Key Components
- Hose Reel Unit: The main freestanding unit designed to hold and store the hose.
- 15m Multi-Purpose Hose: A durable hose suitable for various watering tasks.
- Hose End Connectors (x2): For connecting the hose to accessories and the tap.
- Threaded Tap Connector (x1): For connecting the hose to a standard outdoor tap.
- Adjustable Nozzle: Provides various spray patterns for different watering needs.

Figure 2.1: The Hozelock 30m Compact Hose Reel. This image shows the grey and green hose reel unit, designed to be freestanding, with a visible yellow winding handle on the side. The hose is not shown attached or wound.
3. Setup Instructions
Follow these steps to set up your Hozelock Compact Hose Reel for first use.
- Unpack Components: Carefully remove all items from the packaging. Ensure all listed components in Section 2.1 are present.
- Connect Hose to Reel: The 15m multi-purpose hose is typically pre-attached to the reel. If not, connect one end of the hose to the internal fitting on the reel drum.
- Attach Tap Connector: Screw the threaded tap connector onto your outdoor tap. Ensure it is tightened securely to prevent leaks.
- Connect Hose to Tap: Attach one of the hose end connectors to the end of the 15m hose that will connect to the tap. Then, click this hose end connector onto the threaded tap connector.
- Attach Nozzle: Attach the remaining hose end connector to the other end of the 15m hose. Then, click the adjustable nozzle onto this hose end connector.
- Position the Reel: Place the freestanding hose reel on a flat, stable surface near your tap.
4. Operating Instructions
Using your Hozelock Compact Hose Reel is straightforward. Follow these steps for effective watering.
4.1 Unwinding the Hose
- Ensure the tap is turned off before unwinding.
- Grasp the nozzle end of the hose and walk away from the reel, pulling the hose as needed. The reel will unwind manually.
- Avoid pulling the hose at sharp angles to prevent kinking.
4.2 Using the Adjustable Nozzle
- Turn on the tap to begin water flow.
- Twist the head of the adjustable nozzle to select your desired spray pattern (e.g., jet, cone, mist).
- Adjust the water flow at the tap for desired pressure.
4.3 Rewinding the Hose
- Turn off the tap and release any remaining water pressure from the hose by squeezing the nozzle trigger.
- Walk back towards the reel, guiding the hose onto the drum.
- Use the winding handle on the side of the reel to manually rewind the hose neatly onto the drum. Ensure the hose layers evenly to prevent tangles.
5. Maintenance
Proper maintenance will extend the life of your Hozelock Compact Hose Reel.
- Cleaning: Clean the hose and reel unit periodically with a damp cloth. Avoid harsh chemicals.
- Winter Storage: Before the first frost, drain all water from the hose and reel. Store the unit in a frost-free environment to prevent damage from freezing water.
- Check Connections: Regularly inspect all hose and tap connections for wear or leaks. Replace worn washers or connectors as needed.
- Hose Inspection: Check the hose for any cuts, kinks, or damage. Repair or replace damaged sections to maintain optimal performance.
6. Troubleshooting
Here are solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaking from connections. | Loose connection, worn washer, damaged connector. | Tighten connections. Replace worn washers or connectors. |
| Low water pressure. | Tap not fully open, kink in hose, blocked nozzle. | Ensure tap is fully open. Straighten any kinks. Clean nozzle. |
| Difficulty rewinding hose. | Hose not drained, hose tangled, debris on reel. | Ensure hose is drained. Guide hose evenly during rewinding. Clear any debris. |
| Hose kinking during use. | Pulling hose at sharp angles, hose not fully unwound. | Unwind sufficient hose for your task. Avoid sharp bends. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Hozelock |
| Model Number | 2410 |
| Hose Capacity | Up to 30m of 12.5mm hose |
| Supplied Hose Length | 15m multi-purpose hose |
| Colour | Grey, Green |
| Style | Retractable |
| Installation Method | Freestanding |
| Operation Mode | Manual |
| Part Number | 2410 |
8. Warranty and Support
For warranty information or technical support, please refer to the official Hozelock website or contact their customer service department. Keep your proof of purchase for any warranty claims.
Hozelock Official Website: www.hozelock.com





