1. Product Overview
The Connects2 CT24TY09 is a black double DIN fascia plate designed to facilitate the installation of an aftermarket car stereo into specific Toyota vehicles. This accessory ensures a seamless and professional finish, integrating the new head unit perfectly with the vehicle's dashboard.
Image 1: The Connects2 CT24TY09 Double DIN Fascia Plate, showing the left and right mounting brackets. These brackets are essential for securing an aftermarket head unit in the vehicle's dashboard opening.
2. Compatibility
This fascia plate is compatible with the following Toyota vehicle models:
- Toyota RAV4 (2000 - 2006)
- Toyota MR2 (1999 - 2003)
- Toyota Celica (1999 - 2005)
Ensure your vehicle model and year fall within these ranges for proper fitment.
3. What's in the Box
Upon opening the packaging, verify that all components are present and undamaged:
- Toyota Fascia Plate (Black) Double DIN Brackets (CT24TY09)
No additional components are typically included with this specific product, as it consists solely of the mounting brackets.
4. Installation Guide
The installation of the CT24TY09 fascia plate involves integrating it with your aftermarket double DIN head unit and then securing it within the vehicle's dashboard. Professional installation is recommended for optimal results.
4.1. Required Tools (Not Included)
- Panel removal tools
- Screwdrivers (Phillips and flathead)
- Wire strippers/crimpers (if wiring harness is also being installed)
4.2. Installation Steps
- Prepare the Vehicle: Disconnect the vehicle's negative battery terminal to prevent electrical shorts during installation.
- Remove Factory Radio: Carefully remove the existing factory radio and any surrounding trim panels. Refer to your vehicle's service manual for specific instructions on dashboard disassembly.
- Attach Brackets to Head Unit: Secure the Connects2 CT24TY09 fascia plate brackets to the sides of your new double DIN aftermarket head unit using the screws provided with the head unit. Ensure the brackets are aligned correctly for a flush fit.
- Connect Wiring (if applicable): If installing a new head unit, connect the necessary wiring harnesses (power, ground, speaker, antenna, etc.) according to the head unit's instructions and any vehicle-specific wiring adapters.
- Insert Head Unit Assembly: Carefully slide the assembled head unit and fascia plate into the vehicle's dashboard opening. Ensure all clips and mounting points align.
- Secure Head Unit: Secure the head unit assembly using the vehicle's factory mounting screws or clips.
- Reinstall Trim Panels: Reattach any removed trim panels and dashboard components, ensuring they snap securely into place.
- Reconnect Battery: Reconnect the vehicle's negative battery terminal.
- Test Functionality: Turn on the vehicle and test the new head unit's functionality, including audio, radio, and any other features.
5. Maintenance
The Connects2 CT24TY09 fascia plate requires minimal maintenance. Periodically inspect the installation for any loose screws or rattling. Clean the visible surface with a soft, damp cloth if necessary. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | Connects2 |
| Model | CT24TY09 |
| Product Type | Double DIN Fascia Plate / Mounting Brackets |
| Color | Black |
| Dimensions | Approximately 30 x 25 x 5 cm (Product packaging dimensions) |
| Item Weight | Approximately 30 g |
| Compatibility | Toyota RAV4 (2000-2006), MR2 (1999-2003), Celica (1999-2005) |
7. Warranty and Support
Connects2 offers a 2-Year Warranty on any new component. For warranty claims, technical support, or further assistance, please contact your retailer or visit the official Connects2 website. Ensure you retain your proof of purchase for warranty validation.
Note: This manual provides general installation guidance. Specific vehicle disassembly and reassembly procedures may vary. Always consult your vehicle's service manual or a qualified professional for detailed instructions.
