Product Instruction Manual

Introduction

This manual provides essential information for the proper use and handling of Tacwise 0980 Galvanized White Cable Staples. These high-quality, U-shaped heavy-duty staples are designed for securing low-voltage cables up to 4.5 mm in diameter. This pack contains 5000 galvanized staples, type CT-45/8 mm, which are equivalent to Rapid 28 and Arrow T18 staples. They feature sharp divergent points for maximum holding power and a rust-resistant galvanized coating with a white finish for discreet installation with white cables. They are commonly used for installing cables such as CAT 5, CAT 5e, 6-pair telephone, and 4-conductor cables on skirting boards, door frames, cornices, and more. These staples are compatible with the Tacwise Z-CT Duo and other cable tackers that accept CT-45/8 mm staples. Always verify compatibility with your tool before purchase.

Product Overview

Image 1: Front view of the Tacwise CT-45/8mm White Cable Staples box, indicating 5 x 1,000 galvanized staples. The box is blue and yellow with the Tacwise logo and product details.

Image 2: Two boxes of Tacwise CT-45/8mm White Cable Staples, showing a larger 5000-count box and a smaller 1000-count box side-by-side, illustrating packaging variations.

Image 3: Close-up view of a single 1000-count box of Tacwise CT-45/8mm White Cable Staples, highlighting the product name and compatibility information.

Image 4: A diagram illustrating the application of CT45 staples, showing a staple securing a cable with a diameter of 4.5mm (3/16").

Image 5: An image displaying various cable types suitable for these staples, including Telephone 6 pair 0.5mm, Alarm to BS4773, and Alarm 4 core, all with a maximum diameter of 4.5mm.

Image 6: A close-up view of the white-finished staples, highlighting their U-shape and sharp divergent points designed for secure fastening.

The Tacwise 0980 staples are designed for optimal performance with compatible cable tackers. Their white finish ensures they blend seamlessly with white cables and surfaces, providing a neat and professional installation.

Setup and Compatibility

These CT-45/8 mm staples are specifically designed for use with cable tackers that accept this staple type. It is crucial to verify the compatibility of these staples with your specific stapler model before use to ensure proper function and prevent damage to the tool or the staples.

• Compatible Tools: Primarily designed for the Tacwise Z-CT Duo cable tacker. Also compatible with other brands and models that accept CT-45/8 mm staples (e.g., Rapid 28, Arrow T18 equivalents).
• Cable Diameter: Suitable for low-voltage cables up to 4.5 mm in diameter. This includes common cable types such as CAT 5, CAT 5e, 6-pair telephone cables, and 4-conductor alarm cables.
• Loading Staples: Refer to your cable tacker's instruction manual for specific loading procedures. Ensure staples are inserted correctly into the magazine, with the U-shape facing the correct direction for firing.

Operating Instructions

Using the Tacwise 0980 staples involves operating a compatible cable tacker. Follow these general guidelines for effective and safe operation:

1. Prepare the Surface: Ensure the surface where the cable will be secured is clean, dry, and free from obstructions.
2. Position the Cable: Lay the cable neatly along the desired path.
3. Position the Tacker: Place the nose of the cable tacker over the cable, ensuring the cable is centered within the staple guide.
4. Apply Pressure: Press the tacker firmly against the surface. Consistent pressure is important for proper staple penetration.
5. Fire the Staple: Squeeze the trigger or handle of the tacker to drive the staple.
6. Inspect: After firing, inspect the staple to ensure it has fully penetrated the surface and securely holds the cable without damaging its insulation.
7. Spacing: Space staples appropriately to provide adequate support for the cable, typically every 30-50 cm or as required by local electrical codes.

Safety Note: Always wear appropriate personal protective equipment (PPE), such as safety glasses, when operating stapling tools. Keep hands and fingers clear of the stapler's firing mechanism and staple exit point. Do not attempt to staple into electrical wires or live circuits.

Maintenance and Storage

Proper maintenance and storage of your Tacwise 0980 staples will ensure their longevity and performance:

• Storage: Store staples in their original packaging in a cool, dry place to prevent corrosion and damage. Avoid exposure to high humidity or extreme temperatures.
• Handling: Handle staples carefully to avoid bending or deforming them, which can lead to jamming in the tacker.
• Tool Maintenance: Regularly clean and maintain your cable tacker according to its specific instruction manual. A well-maintained tool will reduce staple-related issues.

Troubleshooting

If you encounter issues while using Tacwise 0980 staples, consider the following common problems and solutions:

If problems persist, refer to the instruction manual of your specific cable tacker or contact Tacwise customer support.

Specifications

• Model Number: 0980
• Staple Type: CT-45/8 mm (U-shaped, heavy-duty)
• Quantity: 5000 staples per pack
• Material: Galvanized steel
• Finish: White
• Equivalent to: Rapid 28, Arrow T18
• Cable Diameter Compatibility: Up to 4.5 mm
• Product Dimensions: 9.4 x 6 x 0.1 cm (3.7 x 2.36 x 0.04 inches)
• Item Weight: 460 grams (1.01 lbs)
• Manufacturer: TACWISE
• Country of Origin: China

Warranty and Support

For information regarding product warranty, please refer to the warranty policy provided by Tacwise or the retailer at the time of purchase. As these are consumable items, specific warranties may apply to the manufacturing quality rather than wear and tear.

For technical support, compatibility questions, or any other inquiries, please visit the official Tacwise website or contact their customer service department. You can find more information and products from Tacwise by visiting their Amazon Brand Store.