1. Product Overview
The ULINE Packing Tape S-423 is a high-quality industrial-grade clear packing tape designed for secure sealing of packages. It features a strong solvent acrylic adhesive that adheres effectively to various surfaces, ensuring reliable closure for shipping and storage needs. This tape is engineered to withstand diverse environmental conditions, including heat, humidity, and cold, maintaining its integrity across a wide temperature range.
Figure 1: ULINE S-423 Packing Tape (Horizontal View)
Figure 2: ULINE S-423 Packing Tape (Vertical Stack)
2. Key Features
- Durable Construction: Industrial-grade tape designed to withstand temperatures from 0°F to 140°F, ensuring performance in various climates.
- Reliable Adhesion: Features a 2.0 MIL strong solvent acrylic adhesive that provides excellent stickiness to virtually any surface, preventing premature peeling.
- Long Shelf Life: Engineered for extended storage without degradation of adhesive quality.
- Crystal Clear Finish: Maintains transparency and does not yellow over time, ensuring a professional appearance for packaged items.
- Optimal Dimensions: Each roll measures 2 inches in width and 110 yards in length, suitable for a wide range of packing tasks.
3. Setup and Preparation
Before applying ULINE Packing Tape, ensure the surface of the package or item is clean, dry, and free from dust, grease, or other contaminants. This will maximize adhesive performance and ensure a secure seal.
- Unpack the Tape: Remove the desired roll of ULINE Packing Tape from its packaging.
- Prepare Dispenser (Optional): If using a tape dispenser, carefully load the tape roll onto the dispenser's core, ensuring the adhesive side faces outwards for proper application.
- Inspect Tape Edge: Locate the starting edge of the tape. If it's difficult to find, gently scrape the side of the roll with a fingernail until the edge lifts.
4. Operating Instructions
ULINE Packing Tape is designed for easy and efficient application, whether by hand or with a tape dispenser.
4.1 Manual Application
- Pull Tape: Pull out a sufficient length of tape to cover the seam or area requiring sealing.
- Apply Firmly: Press the tape firmly onto the surface, starting from one end and smoothing it down to the other to eliminate air bubbles and ensure full contact.
- Cut Tape: Use scissors or a sharp edge to cut the tape cleanly.
4.2 Dispenser Application
- Position Dispenser: Place the dispenser's roller firmly against the surface where you wish to start taping.
- Roll and Apply: Roll the dispenser along the seam or area, applying steady pressure to ensure the tape adheres smoothly.
- Cut Tape: Once the desired length is applied, tilt the dispenser to engage the cutting blade and cleanly sever the tape.
5. Maintenance and Storage
Proper maintenance and storage will prolong the life and effectiveness of your ULINE Packing Tape.
- Storage Conditions: Store tape rolls in a cool, dry place, away from direct sunlight and extreme temperatures. Ideal storage temperature is between 50°F and 70°F (10°C and 21°C) with moderate humidity.
- Keep Clean: Ensure the tape's adhesive surface remains clean and free from dust or debris before use.
- Protect Edges: If not using a dispenser, consider using a small piece of paper or a tape tab to mark and protect the end of the roll from sticking to itself.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tape not sticking properly. | Surface is dirty, dusty, or oily; tape stored in extreme conditions; insufficient pressure during application. | Clean and dry the surface thoroughly. Store tape in recommended conditions. Apply firm, even pressure when taping. |
| Tape tears or splits easily. | Improper cutting technique; tape stored in very cold conditions; damaged roll. | Use a sharp cutting tool or dispenser blade. Allow tape to warm to room temperature before use. Inspect roll for damage before use. |
| Difficulty finding tape end. | Tape end has adhered to the roll. | Gently scrape the side of the roll with a fingernail or a flat, non-sharp object until the edge lifts. Consider using a tape tab for future use. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | ULINE |
| Model Number | S-423-6 |
| Color | Clear |
| Material | Acrylic |
| Number of Items | 6 (Pack) |
| Recommended Uses | Packaging |
| Size | 2 inch X 110 Yards |
| Item Thickness | 2 Mils |
| Tensile Strength | 20 Pounds |
| Upper Temperature Rating | 140 Degrees Fahrenheit |
| Water Resistance Level | Water Resistant |
| Item Weight | 3.4 pounds |
| Product Dimensions | 1 x 1 x 1 inches (per roll, approximate) |
8. Warranty and Support
For specific warranty information or product support, please refer to the official ULINE website or contact ULINE customer service directly. Keep your purchase receipt for any warranty claims.
ULINE Customer Service:
- Website: www.uline.com
- Phone: 1-800-295-5510 (as indicated on product label)
