AVIDSEN 103800

Avidsen 103800 Programmable Timer Socket User Manual

Model: 103800

Introduction

This manual provides instructions for the safe and efficient use of your Avidsen 103800 Programmable Timer Socket. This device is designed to automatically control the power supply to household appliances, allowing for scheduled operation.

Safety Information

Product Overview

The Avidsen 103800 is a mechanical programmable timer socket. It features a rotating dial with segments for setting ON/OFF times.

Avidsen 103800 Programmable Timer Socket

Figure 1: Avidsen 103800 Programmable Timer Socket. This image shows the front view of the white timer socket, highlighting the central rotating dial for programming and the socket outlet.

Key Features

Setup

  1. Initial Plug-in: Plug the Avidsen 103800 timer into a standard 230V, 50Hz wall socket.
  2. Set Current Time: Rotate the central dial clockwise until the arrow indicator aligns with the current time of day. The dial is marked in 24-hour format.
  3. Program ON/OFF Times: The dial is divided into segments, each representing 15 minutes. Push down the segments corresponding to the times you want the connected appliance to be ON. Leave the segments up for the times you want the appliance to be OFF.
  4. Connect Appliance: Plug the appliance you wish to control into the timer socket.
  5. Select Operating Mode: The timer typically has a switch for different modes (e.g., ON, OFF, TIMER). Set this switch to the "TIMER" position for automatic operation.

Note: The timer does not require batteries as it is mains powered.

Operating

Once set up, the timer will automatically switch the connected appliance ON and OFF according to your programmed schedule.

Manual Override

If your timer has a manual override switch (often labeled ON/OFF/TIMER), you can temporarily bypass the programmed schedule:

Refer to the specific markings on your device for exact switch positions.

Maintenance

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Appliance does not turn ON/OFF at programmed times.
  • Timer not set to "TIMER" mode.
  • Segments not pushed down/up correctly.
  • Current time not set correctly.
  • Appliance not plugged in or faulty.
  • Ensure the mode switch is in the "TIMER" position.
  • Verify all desired ON/OFF segments are correctly positioned.
  • Re-adjust the current time on the dial.
  • Check appliance power and connection.
Timer is not working at all.
  • No power to the wall socket.
  • Timer is faulty.
  • Test the wall socket with another appliance.
  • If the socket works, the timer may be faulty. Contact support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Avidsen website. Keep your proof of purchase for warranty claims.

Manufacturer: AVIDSEN

Contact: For support, please visit www.avidsen.com