Energizer 1620 Lithium Coin Battery

1. Introduction

This manual provides essential instructions for the safe and effective use of Energizer 1620 lithium coin batteries. These batteries are designed for various small electronic devices, including heart-rate monitors, keyless entry systems, glucose monitors, toys, and games. Please read all safety warnings and operating procedures before use to ensure proper function and prevent hazards.

2. Important Safety Information

WARNING:

• KEEP OUT OF REACH OF CHILDREN. Swallowing may lead to serious injury or death in as little as 2 hours due to chemical burns and potential perforation of the esophagus. Immediately see a doctor if swallowed. Have the doctor phone (202) 625-3333.
• Keep batteries in their original packaging until ready to use.
• Dispose of used batteries immediately and safely.
• Risk of injury due to fire, explosion, or leakage. Do not disassemble, charge, crush, or expose batteries to fire or high temperatures.
• Energizer utilizes child-resistant packaging that complies with U.S. Consumer Product Safety Commission (CPSC) safety standards and recommendations.

Always handle batteries with care and follow all manufacturer guidelines for the device in which they are used.

3. Setup and Installation

Before installing the Energizer 1620 battery, ensure your device is turned off and consult its specific user manual for battery compartment location and installation instructions.

1. Unpack the Battery: Carefully remove the battery from its child-resistant packaging.
2. Identify Polarity: Observe the positive (+) and negative (-) markings on the battery and within your device's battery compartment.
3. Insert Battery: Place the battery into the compartment, ensuring the polarity matches the device's indications. Incorrect insertion can damage the device or prevent it from functioning.
4. Secure Compartment: Close the battery compartment securely according to your device's design.

Figure 1: Energizer 1620 Lithium Coin Battery in its child-resistant packaging. Always keep batteries in original packaging until use.

4. Operation

Once the Energizer 1620 battery is correctly installed, your device should be ready for operation. Refer to your device's instruction manual for specific operating procedures.

• Ensure the device is powered on correctly.
• If the device does not power on, re-check battery installation and polarity.
• Replace batteries when the device indicates low power or ceases to function optimally.

5. Maintenance and Storage

Proper maintenance and storage extend battery life and ensure safety.

• Storage: Store unused batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
• Disposal: Dispose of used batteries promptly and responsibly according to local regulations. Do not incinerate or mutilate batteries.
• Cleaning: If battery terminals become dirty, gently wipe them with a clean, dry cloth. Do not use liquids or abrasive materials.
• Avoid Short Circuits: Do not store loose batteries together or with metal objects (e.g., coins, keys) as this can cause a short circuit, leading to heat generation or leakage.

6. Troubleshooting

7. Specifications

• Model: Energizer 1620 (CR1620)
• Type: Lithium Coin Cell
• Voltage: 3 Volts
• Dimensions: Approximately 16mm diameter x 2.0mm thickness
• Reusability: Single Use (Non-rechargeable)
• Manufacturer: Energizer Batteries- Consumables
• Item Model Number: BJ-4N9T-7MHI

8. Warranty and Support

For specific warranty information, please refer to the packaging or contact Energizer customer support directly. Energizer stands behind the quality of its products.

For further assistance or inquiries, please visit the official Energizer website or contact their customer service department. Keep your purchase receipt for any warranty claims.

Energizer Official Website: www.energizer.com