Ozeri Touch 440 Lbs Total Body Weight Scale User Manual

1. Introduction

The Ozeri Touch 440 lbs Total Body Weight Scale is an advanced personal health device designed to provide comprehensive body composition analysis. This scale accurately measures not only your weight but also calculates body fat, hydration, muscle mass, and bone measurements. Featuring StepOn technology and auto-recognition for up to 8 users, it offers a convenient and insightful way to track your health progress.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Ozeri Touch scale to ensure optimal performance and longevity.

Figure 1: Ozeri Touch 440 Lbs Total Body Weight Scale (White)

This image shows the sleek, white Ozeri Touch scale with its blue LCD display and four circular metal sensors. The Ozeri logo is visible at the bottom center.

2. Setup and Initial Configuration

2.1 Battery Installation

The Ozeri Touch scale requires 2 CR2032 Lithium batteries (included). The battery compartment is located on the underside of the scale.

1. Locate the battery compartment cover on the back of the scale.
2. Open the cover by sliding it or gently prying it open.
3. Insert the 2 CR2032 batteries, ensuring correct polarity (+ and -).
4. Close the battery compartment cover securely.

Figure 2: Underside of the Ozeri Touch Scale

This image displays the black underside of the Ozeri scale, highlighting the battery compartment and the unit switch. The four rubber feet are also visible.

2.2 Unit Selection

To change the unit of measurement (pounds, kilograms, or stones), locate the "UNIT" switch on the back of the scale near the battery compartment. Slide the switch to your desired unit.

2.3 Setting Up User Profiles

The Ozeri Touch scale can store up to 8 user profiles. Setting up a profile allows the scale to automatically recognize you and provide personalized body composition data.

1. Ensure the scale is on a hard, flat surface.
2. Press the SET button located below the display. The display will show "P1" (Profile 1).
3. Use the UP or DOWN arrows to select an available profile number (P1-P8).
4. Press SET to confirm the profile number.
5. The gender icon will blink. Use the UP or DOWN arrows to select your gender (Male, Female, Athletic Male, Athletic Female). Athletic mode is for individuals who engage in intense physical activity regularly.
6. Press SET to confirm.
7. The height display will blink. Use the UP or DOWN arrows to set your height.
8. Press SET to confirm.
9. The age display will blink. Use the UP or DOWN arrows to set your age.
10. Press SET to confirm. The scale will now be ready for your first measurement.

3. Operating Instructions

3.1 Taking a Measurement

For accurate body composition analysis, ensure your feet are clean and dry, and step onto the scale barefoot. The scale uses Bioelectrical Impedance Analysis (BIA) which requires direct skin contact with the metal sensors.

1. Place the scale on a hard, flat surface (avoid carpets or uneven floors).
2. Step onto the scale barefoot, ensuring your feet are positioned on the four metal sensors.
3. The scale will automatically power on and display your weight.
4. After a few seconds, it will cycle through and display your body fat percentage, hydration percentage, muscle mass percentage, and bone measurement.
5. The scale will automatically recognize your profile if your weight is within a certain range of your last recorded weight for your profile.

Figure 3: Taking a Measurement

This image shows a person's bare feet positioned on the metal sensors of the Ozeri Touch scale, with the blue LCD display showing a weight reading.

3.2 Using the Infant Tare Feature

The Infant Tare feature allows you to accurately weigh an infant, pet, or luggage by first weighing yourself, then weighing yourself again while holding the item.

1. Step onto the scale by yourself and allow it to register your weight.
2. Step off the scale.
3. Step back onto the scale while holding the infant, pet, or luggage.
4. The scale will display both your weight and the weight of the item separately on the LCD screen.

Figure 4: Infant Tare Feature Icons

This image highlights the icons on the Ozeri Touch scale's display that represent the infant, pet, and luggage tare functions, indicating its versatility for weighing various items.

4. Maintenance and Care

• Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
• Storage: Store the scale in a cool, dry place. Avoid extreme temperatures and direct sunlight.
• Battery Replacement: If the display becomes dim or shows a low battery indicator, replace both CR2032 batteries.
• Placement: Always place the scale on a hard, flat, and stable surface for accurate readings. Avoid carpets or soft surfaces.

5. Troubleshooting

6. Specifications

7. Warranty and Support

For detailed warranty information and customer support, please refer to the official Ozeri website or contact their customer service directly. You can also find additional information and a downloadable user guide (PDF) at the following link:

Download User Guide (PDF)

For further assistance, please reach out to Ozeri customer support through their official channels.