Fujifilm EF-42 Shoe Mount Flash User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your Fujifilm EF-42 Shoe Mount Flash. Please read this manual thoroughly before using the product and retain it for future reference. The Fujifilm EF-42 is designed to provide enhanced lighting capabilities for compatible Fujifilm cameras, featuring a guide number of 42 (at ISO 100, 105mm zoom) and versatile bounce and swivel functions.

Safety Precautions

• Do not disassemble or modify the flash unit.
• Keep the flash unit dry. Do not expose it to water or high humidity.
• Avoid direct eye exposure to the flash, especially at close range.
• Use only specified batteries (4 AA batteries).
• Store the flash unit in a cool, dry place away from direct sunlight.

Package Contents

Verify that all items are present in your package:

• Fujifilm EF-42 Shoe Mount Flash Unit
• Soft Case (if included with your specific purchase)
• Mini Stand (if included)
• Instruction Manual (this document)

Setup

1. Battery Installation

The EF-42 flash requires four (4) AA batteries. For optimal performance and recycle times, high-capacity rechargeable Ni-MH batteries are recommended.

1. Locate the battery compartment cover on the side of the flash unit.
2. Slide the cover open in the direction indicated by the arrow.
3. Insert four AA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
4. Close the battery compartment cover securely until it clicks into place.

Image: Front view of the Fujifilm EF-42 Shoe Mount Flash. This image displays the main flash head and the infrared assist beam window.

2. Mounting to Camera

The EF-42 flash unit attaches to your camera's hot shoe.

1. Ensure both the camera and the flash unit are powered off.
2. Remove the protective cap from the camera's hot shoe and from the flash unit's foot.
3. Slide the flash unit's mounting foot completely into the camera's hot shoe.
4. Tighten the locking wheel on the flash unit's foot to secure it firmly to the camera. Do not overtighten.

Operating the Flash

1. Power On/Off

Locate the ON/OFF switch on the back panel of the flash unit.

• To power on, slide the switch to the "ON" position. The LCD panel will illuminate.
• To power off, slide the switch to the "OFF" position.

Image: Rear view of the Fujifilm EF-42 Shoe Mount Flash, showing the LCD display, mode and select buttons, and the power switch.

2. Flash Modes

The EF-42 offers various flash modes to suit different shooting conditions. Use the MODE button to cycle through available modes and the SEL (Select) button to adjust settings within a mode.

• TTL (Through-The-Lens) Mode: The flash automatically adjusts its output based on the camera's metering system for balanced exposure. This is the recommended mode for most situations.
• Manual Mode: Allows you to manually set the flash output power (e.g., 1/1, 1/2, 1/4, etc.). This mode provides precise control for advanced users.
• Multi Mode: (If available) Fires the flash multiple times during a single exposure to capture stroboscopic effects.

3. Bounce and Swivel Functionality

The flash head can be tilted and swiveled to bounce light off ceilings or walls, creating softer, more natural-looking illumination and avoiding harsh direct flash.

• Tilting: The flash head can be tilted upwards to various angles (e.g., 0°, 45°, 60°, 75°, 90°). Gently push the flash head upwards until it locks into the desired position.
• Swiveling: The flash head can be swiveled horizontally (e.g., 90° left, 180° right). Gently rotate the flash head to the left or right until it locks into the desired position.

Image: Demonstration of the Fujifilm EF-42 flash head swiveling horizontally, illustrating its flexibility for bounce flash.

Image: Demonstration of the Fujifilm EF-42 flash head tilting vertically, showing its ability to direct light upwards for bounce lighting.

4. Zoom Head

The EF-42 features an automatic zoom head that adjusts to match the focal length of your lens, optimizing light coverage. In some modes, manual zoom adjustment may also be available via the SEL button.

5. Test Flash and Charge Indicator

The TEST/CHARGE button serves two functions:

• When the flash is charged and ready to fire, pressing this button will emit a test flash.
• The indicator light on this button will glow when the flash is fully charged and ready for use. It will blink or remain off during charging.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use solvents or abrasive cleaners.
• Battery Care: Remove batteries if the flash unit will not be used for an extended period to prevent leakage.
• Storage: Store the flash in its protective case (if supplied) in a cool, dry environment.

Troubleshooting

Specifications

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Fujifilm website. For technical support, service, or inquiries, please contact Fujifilm customer service.

You can find more information and support resources on the Official Fujifilm Store on Amazon.