Introduction
This manual provides essential instructions for the safe and efficient use of your Canon LC-E10E Battery Charger. This charger is specifically designed for Canon LP-E10 rechargeable lithium-ion battery packs, commonly used with Canon EOS 1100D, EOS Rebel T3, and EOS Kiss X50 camera models. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Front view of the Canon LC-E10E Battery Charger. This image displays the charger's main body, including the battery slot, Canon branding, and LED indicators for 'CHARGE' and 'FULL' status.
Setup and Operation
1. Connect to Power:
Locate the foldable AC plug on the back of the charger. Extend the prongs and plug the charger directly into a standard electrical wall outlet (100-240V AC, 50/60Hz). Ensure the connection is secure.
Figure 2: Rear view of the Canon LC-E10E Battery Charger. This image shows the foldable AC plug extended, ready for insertion into a wall outlet. The charger's specifications are also visible on the back label.
2. Insert Battery:
Align the contacts of the Canon LP-E10 battery with the contacts inside the charger's battery slot. Gently slide the battery into the slot until it clicks securely into place. Ensure the battery is inserted correctly; forcing it may cause damage.
Figure 3: Canon LC-E10E Battery Charger with an LP-E10 battery being inserted. This image illustrates the correct orientation for placing the battery into the charging slot, ensuring proper contact alignment.
3. Monitor Charging Status:
The charger features two LED indicators:
- CHARGE LED: This indicator will illuminate when the battery is actively charging.
- FULL LED: This indicator will illuminate when the battery has reached a full charge.
Once the FULL LED is lit, the battery is fully charged and ready for use. You can then remove the battery from the charger.
4. Disconnect and Store:
After charging, unplug the charger from the wall outlet. Fold the AC prongs back into the charger body for compact storage. Store the charger and battery in a cool, dry place away from direct sunlight and extreme temperatures.
Maintenance
- Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the charger to moisture or liquids.
- Do not attempt to disassemble or repair the charger yourself. Refer to qualified service personnel for any repairs.
- Ensure the battery contacts on both the charger and the battery are clean to maintain optimal charging performance.
Troubleshooting
- Charger not working: Ensure the charger is securely plugged into a functional wall outlet. Check if the battery is correctly inserted.
- Battery not charging: Verify that the battery is a genuine Canon LP-E10 battery and is not damaged. Clean the battery and charger contacts.
- Overheating: If the charger or battery becomes excessively hot during charging, disconnect it immediately and allow it to cool down. Do not use if overheating persists.
Specifications
| Feature | Detail |
|---|---|
| Model Number | LC-E10E (5110B003AA) |
| Compatible Battery | Canon LP-E10 |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Voltage | 7.2 Volts |
| Product Dimensions | 8.66 x 3.94 x 2.76 inches (2.76"D x 3.94"W x 8.66"H) |
| Item Weight | 2.12 ounces (60 Grams) |
| Color | Black |
| Manufacturer | Canon |
| First Available Date | August 5, 2012 |
Warranty and Support
Information regarding specific warranty terms and customer support for the Canon LC-E10E Battery Charger was not available in the provided product details. For detailed warranty information and technical support, please refer to the official Canon website or contact Canon customer service directly.
You may also visit the Canon Store on Amazon for additional product information and resources.
