Introduction
Welcome to the world of Mondaine, where timeless design meets Swiss precision. Your Mondaine A995.CLOCK.16SBB Wall Clock is an iconic piece, inspired by the original Swiss Railway Clock designed by Hans Hilfiker in 1944. This manual provides essential information for the proper setup, operation, and maintenance of your new clock, ensuring its longevity and accurate timekeeping.
Image: Mondaine brand story hero image, illustrating the heritage of the Swiss Railway Clock design.
Product Overview
The Mondaine A995.CLOCK.16SBB is a 40 cm wall clock featuring a brushed aluminum case, a clear white dial, and the distinctive red second hand. It is designed for durability and precision, embodying the minimalist Bauhaus style.
Image: Front view of the Mondaine A995.CLOCK.16SBB wall clock.
Image: Rear view of the Mondaine A995.CLOCK.16SBB wall clock, highlighting the battery compartment and setting mechanism.
Setup
1. Unpacking
Carefully remove the clock from its packaging. Inspect the clock for any signs of damage. Retain the packaging for future storage or transport.
Image: Mondaine wall clock packaging and warranty certificate.
2. Battery Installation
Your Mondaine wall clock requires 2 AA batteries (included).
- Locate the battery compartment on the back of the clock.
- Open the battery compartment cover.
- Insert the 2 AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
3. Setting the Time
Once batteries are installed, the clock will begin to operate.
- Locate the time-setting knob on the back of the clock, usually near the center of the movement.
- Gently turn the knob clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
- The red second hand will start moving once the time is set and the batteries are correctly installed.
4. Mounting the Clock
Choose a suitable location on a wall for your clock. Ensure the wall can support the clock's weight (approximately 2.7 kg).
- Use a sturdy screw or hook securely fastened into a wall stud or appropriate wall anchor.
- Hang the clock using the integrated hanging slot on the back.
- Ensure the clock is level for optimal appearance.
Image: Mondaine wall clock displayed in a modern living space.
Image: Mondaine wall clock in a home office or study setting.
Operating the Clock
Your Mondaine wall clock is designed for simple, reliable operation. Once the batteries are installed and the time is set, it will continuously display the time.
Time Adjustment
Should you need to adjust the time (e.g., for daylight saving changes or after a power outage if the clock was stopped), simply repeat the "Setting the Time" steps outlined in the Setup section.
Maintenance
Cleaning
To maintain the appearance of your Mondaine clock:
- Wipe the case and glass with a soft, dry, lint-free cloth.
- Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or the glass.
- The clock is dust-resistant, but regular gentle cleaning will keep it looking its best.
Battery Replacement
When the clock stops or the second hand movement becomes erratic, it's time to replace the batteries.
- Remove the clock from the wall.
- Open the battery compartment on the back.
- Remove the old batteries and dispose of them responsibly according to local regulations.
- Insert new 2 AA batteries, observing correct polarity.
- Close the compartment and re-hang the clock. Reset the time if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not running | Dead or incorrectly installed batteries. | Replace batteries with new ones, ensuring correct polarity. |
| Clock running slow or fast | Low battery power; extreme temperature fluctuations. | Replace batteries. Ensure clock is in a stable room temperature environment. If problem persists, contact support. |
| Hands are stuck or misaligned | Physical obstruction or internal mechanism issue. | Gently check if anything is obstructing the hands. If not, do not attempt to force the hands. Contact authorized Mondaine service. |
Specifications
Image: Visual representation of key product specifications.
| Feature | Detail |
|---|---|
| Model Number | A995.CLOCK.16SBB |
| Brand | Mondaine |
| Case Diameter | 40 cm (400 mm) |
| Case Height | 46.5 mm |
| Case Material | Brushed Aluminum |
| Dial Color | White |
| Second Hand Color | Red |
| Glass Material | Hardened Mineral Crystal |
| Movement Type | Quartz |
| Resistance | Dust Resistant |
| Power Source | 2 x AA Batteries (included) |
| Item Weight | 2.7 Kilograms |
| Origin | Swiss Made |
Warranty and Support
Your Mondaine A995.CLOCK.16SBB Wall Clock is covered by a 2-year warranty from the date of purchase. This warranty covers manufacturing defects.
For warranty claims, defects, or battery replacement services, please contact an authorized Mondaine dealer or the official Mondaine Watch Ltd. support. You can find contact information and authorized dealers on the official Mondaine website.
Please have your proof of purchase and the clock's model number (A995.CLOCK.16SBB) ready when contacting support.
