Yale 3301/3501 Series Multi-Sized Door Closer Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, adjustment, operation, and maintenance of the Yale 3301/3501 Series Multi-Sized Door Closer. Designed for professional and heavy-duty use, this door closer ensures controlled door closing for various applications. Please read these instructions carefully before proceeding with installation or adjustments.

Product Overview

The Yale 3301/3501 Series Door Closer features a robust design for reliable performance.

Key Features:

• Body Material: Cast aluminum for durability.
• Valve Design: Staked valves for consistent performance.
• Mechanism: Rack & pinion design.
• Piston Diameter: 1-1/4" (32mm).
• Pinion Journals: 5/8" (16mm) diameter.
• Adjustment Valves: Separate and independent valves for latch, sweep, and backcheck intensity.
• Projection: 2-1/8" (54mm) with standard covers.
• Door Swing: Allows 180-degree door swing with all standard arm applications (conditions permitting).
• Covers: 3300/3301 models ship with slimline plastic cover; 3500/3501 models ship with full cover. Metal and architectural covers are available for 3500/3501 only.
• Heavy-Duty Arms: Options include Regular Rigid, Parallel Rigid, Holder/Stop, Holder/Stop Spring, and UNI Stop.
• Optional Feature: Delayed action.
• Available Finishes: Aluminum (689), Dark Bronze (690), and Satin Brass (696).

Installation

Proper installation is crucial for the door closer's performance and longevity. Refer to the template provided with your specific unit for precise drilling locations and mounting configurations.

General Steps:

1. Prepare the Door/Frame: Ensure the mounting surface is clean, flat, and structurally sound.
2. Position the Template: Affix the provided paper template to the door and/or frame according to the desired mounting type (e.g., standard, parallel arm, top jamb).
3. Drill Pilot Holes: Carefully drill pilot holes for the closer body and arm brackets as indicated on the template.
4. Mount the Closer Body: Secure the closer body to the door or frame using the appropriate screws. Ensure it is level and firmly attached.
5. Install the Main Arm: Attach the main arm to the closer's pinion shaft.
6. Install the Forearm/Shoe: Connect the forearm to the main arm and secure the shoe to the door frame or door, depending on the mounting type.
7. Attach Cover: Once the closer is installed and adjusted, place the appropriate cover (slimline, full, metal, or architectural) over the closer body.

Note: Specific mounting hardware and arm configurations will vary. Always consult the detailed template and instructions included with your product for exact procedures.

Setup and Adjustment

The Yale 3301/3501 Series door closer features independent valves for precise control over the door's closing cycle.

Adjustment Valves:

• Sweep Speed Valve: Controls the speed of the door from its maximum opening point to approximately 10-15 degrees from the closed position. Turn clockwise to decrease speed, counter-clockwise to increase speed.
• Latch Speed Valve: Controls the speed of the door for the final 10-15 degrees of closing, ensuring the latch engages properly. Turn clockwise to decrease speed, counter-clockwise to increase speed.
• Backcheck Intensity Valve (Optional): Controls the resistance the door encounters when opened forcefully beyond a certain point (typically 70-80 degrees). This prevents damage to the door and frame. Turn clockwise to increase backcheck intensity, counter-clockwise to decrease.

Caution: Do not turn adjustment valves more than two full turns counter-clockwise from the factory-set closed position, as this may cause fluid leakage and damage the closer.

Operating Instructions

Once properly installed and adjusted, the Yale 3301/3501 Series door closer will provide a controlled closing action for your door. The door should open smoothly and close consistently without slamming or excessive resistance.

• Opening the Door: The door should open with minimal effort. If resistance is too high, check the spring power adjustment (if applicable) and backcheck settings.
• Closing the Door: The door will close automatically. The sweep speed controls the initial closing, and the latch speed controls the final closing to ensure secure latching.
• Hold-Open Function (if applicable): If equipped with a hold-open arm, the door can be held open at a specific angle. Engage the hold-open mechanism as per the arm's specific instructions.

Maintenance

The Yale 3301/3501 Series door closer is designed for minimal maintenance. Regular inspection is recommended to ensure optimal performance.

• Periodic Inspection: Annually inspect the closer body, arms, and mounting screws for any signs of wear, damage, or looseness.
• Tighten Fasteners: If any screws or fasteners are loose, tighten them securely. Do not overtighten.
• Check for Leaks: Inspect the closer body for any signs of fluid leakage. A leaking closer indicates internal seal failure and requires replacement.
• Clean: Wipe down the closer and arm with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners.
• Re-adjust: If door closing performance changes over time, re-adjust the sweep and latch speed valves as needed.

Troubleshooting

Refer to the table below for common issues and their potential solutions.

Specifications

• Model Numbers: 3301/3501 Series
• Material: Cast Aluminum
• Piston Diameter: 1-1/4" (32mm)
• Pinion Journal Diameter: 5/8" (16mm)
• Projection (Standard Covers): 2-1/8" (54mm)
• Item Weight: 8 pounds
• Recommended Use: Professional and heavy-duty applications
• Available Finishes: Aluminum (689), Dark Bronze (690), Satin Brass (696)
• UPC: 767674737112
• ASIN: B004GVT0OG

Warranty and Support

For warranty information or technical support regarding your Yale 3301/3501 Series Multi-Sized Door Closer, please contact Yale customer service or refer to the official Yale website. Keep your purchase receipt for warranty claims.

Yale Customer Support: Visit Yale Contact Us Page