Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet

Product Overview

The Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet is designed to securely store up to 8 rifles or shotguns, accommodating firearms up to 52 inches tall. This cabinet features an easy-to-assemble design with integrated, form-fitting parts that are securely fastened together. The fasteners are tamper-proof from the exterior, enhancing security.

Key features include:

• A 3-point locking system with a double-bitted, key-coded lock for enhanced security.
• A removable steel shelf for additional storage flexibility.
• Stack-On patented barrel rests to properly secure firearms.
• California approved firearms safety device, meeting the requirements of California Penal Code section 12088.

Safety Information

Important: Always prioritize safety when handling firearms and operating this security cabinet. Do not attempt to tamper with the fasteners from the outside, as this can compromise the cabinet's security features. Ensure all firearms stored within the cabinet are unloaded and secured according to local regulations and best practices. Keep keys in a secure location, inaccessible to unauthorized individuals, especially children.

Setup and Assembly

The Stack-On GCB-8RTA cabinet is designed for easy assembly. All necessary parts are integrated and form-fitting, requiring minimal tools for construction. It is recommended to assemble the cabinet in its final desired location due to its weight and size once assembled.

Assembly Steps (General):

1. Unpack all components and verify against the parts list (refer to Figure 1).
2. Attach the back panel to the base and top panels using the provided tamper-proof fasteners.
3. Secure the side panels to the assembled back, base, and top sections (refer to Figure 2).
4. Install the door, ensuring the hinges align correctly and the locking mechanism operates smoothly.
5. Insert the removable steel shelf at the desired height.
6. Place the patented barrel rests at the bottom of the cabinet.
7. Ensure all fasteners are tightened securely.

For detailed, step-by-step instructions, please refer to the printed manual included with your product packaging.

Operation

Operating your Stack-On security cabinet is straightforward, focusing on secure storage and easy access for authorized users.

Locking and Unlocking:

• The cabinet features a 3-point locking system operated by a double-bitted, key-coded lock.
• To unlock, insert the key into the lock cylinder and turn it to disengage the locking bolts.
• To lock, close the door firmly and turn the key to engage the locking bolts. Remove the key immediately after locking.

Storing Firearms:

• Ensure all firearms are unloaded before placing them in the cabinet.
• Utilize the patented barrel rests to keep firearms upright and organized.
• The removable steel shelf can be used for storing ammunition, accessories, or smaller firearms.

Maintenance

To ensure the longevity and continued security of your Stack-On cabinet, periodic maintenance is recommended:

• Cleaning: Wipe the exterior and interior surfaces with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
• Lock Mechanism: Periodically check the lock for smooth operation. If it becomes stiff, a small amount of graphite lubricant can be applied to the keyhole. Do not use oil-based lubricants.
• Fasteners: Although tamper-proof from the outside, occasionally check the internal fasteners to ensure they remain tight.
• Environment: Store the cabinet in a dry environment to prevent rust and corrosion.

Troubleshooting

If you encounter issues with your Stack-On GCB-8RTA security cabinet, consider the following common solutions:

• Door Not Closing/Locking Properly:
  • Ensure the cabinet is on a level surface. Uneven flooring can cause the cabinet to twist slightly, affecting door alignment.
  • Check for any obstructions inside the cabinet that might be preventing the door from closing fully.
  • Verify that the locking bolts are not obstructed.
• Key Sticking/Hard to Turn:
  • Apply a small amount of graphite powder (not oil) into the keyhole. Insert and remove the key several times to distribute the lubricant.
  • Ensure you are using the correct key.
• Cabinet Wobbles After Assembly:
  • Double-check that all assembly fasteners are securely tightened.
  • Ensure the cabinet is placed on a flat, stable surface.

If these steps do not resolve the issue, please contact Stack-On customer support for further assistance.

Specifications

Detailed specifications for the Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet:

Warranty and Support

The product specifications indicate "Warranty Description: N/a." Please refer to your purchase documentation or contact the retailer for specific warranty information, if any, provided at the time of purchase.

For technical support, assembly questions, or parts inquiries, please contact Stack-On customer service. Contact information can typically be found on the manufacturer's official website or on the product packaging.