Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Absolute TW-600 High Efficiency Dome Tweeter. Please read thoroughly before use to ensure proper functionality and longevity of your product.
Product Features
- High Efficiency Dome Tweeter
- Built-in Crossover for optimal frequency separation
- 600 Watts Maximum Output Power
- 1-inch Speaker Size for crisp high-frequency reproduction
- 2 Ohms Impedance for compatibility with various audio systems
- Frequency Response: 100 Hz (Note: While the specification lists 100 Hz, tweeters typically handle higher frequencies. The built-in crossover will manage the appropriate range.)
- Connectivity Technology: Speaker Wire
- Product Dimensions: 4"D x 4"W x 4"H
- Item Weight: 3.2 ounces
Package Contents
Your Absolute TW-600 package includes:
- Two (2) Absolute TW-600 Dome Tweeters
- Mounting hardware (screws, brackets for various mounting options)
- Integrated crossover networks
Installation Guide
Proper installation is crucial for optimal performance and safety. If you are unsure about any steps, it is recommended to consult a professional car audio installer.
Tools Required
- Wire strippers/cutters
- Screwdriver set
- Drill (if flush mounting)
- Multimeter (for checking impedance/polarity)
- Electrical tape or heat shrink tubing
Wiring
The TW-600 tweeters feature a built-in crossover network. This means you can connect the tweeter wires directly to your amplifier's high-frequency output or to the appropriate high-pass filtered output of your head unit. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues that can degrade sound quality.
- Identify the positive (+) and negative (-) terminals on your audio system's high-frequency output.
- Connect the corresponding wires from the tweeter to these terminals. The tweeter wires are typically color-coded (e.g., red for positive, black for negative).
- Secure all connections with electrical tape or heat shrink tubing to prevent short circuits and ensure durability.
Mounting Options
The TW-600 offers multiple mounting options to seamlessly integrate into your vehicle's interior. Choose the method that best suits your aesthetic and acoustic preferences.
Flush Mounting
- Choose a suitable flat surface in your vehicle (e.g., door panel, dashboard) that allows for sufficient depth.
- Use the provided template (if available) or carefully measure the tweeter's diameter to cut an appropriate hole.
- Insert the tweeter into the hole and secure it from behind using the provided hardware.
Surface Mounting
- Attach the surface mount cups to your desired location using the supplied screws. Ensure the surface is clean and stable.
- Snap the tweeters into the surface mount cups. Adjust the angle of the tweeters for optimal sound dispersion towards the listening position.
Operating Instructions
Once installed, follow these steps for optimal operation:
- Start your audio system at a low volume level.
- Gradually increase the volume, listening for clear high-frequency sound reproduction.
- Adjust your head unit's equalizer settings to fine-tune the sound to your preference. Avoid excessive treble boost, which can lead to harshness or potential damage to the tweeters.
- The built-in crossover will automatically protect the tweeters from damaging low frequencies, ensuring they only reproduce the intended high-range audio.
Maintenance
To ensure the longevity and optimal performance of your TW-600 tweeters, follow these maintenance guidelines:
- Keep the tweeters free from dust and debris. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners.
- Avoid exposing the tweeters to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Do not apply excessive force or pressure to the tweeter domes, as this can cause irreversible damage.
- Regularly check wiring connections for any signs of wear, corrosion, or looseness. Tighten or repair as necessary.
Troubleshooting
If you encounter any issues with your Absolute TW-600 tweeters, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound | Loose or incorrect wiring | Check all connections and ensure correct polarity. |
| No Sound | Blown tweeter | Test tweeter with a multimeter for continuity. Replace if open circuit. |
| Distorted Sound | Overpowering or improper EQ settings | Reduce amplifier gain or head unit treble. Check for clipping. |
| Distorted Sound | Damaged tweeter | Inspect tweeter dome for physical damage. Replace if damaged. |
| Hissing/Static | Ground loop or poor signal quality | Ensure proper grounding of all audio components. Check signal cables for interference. |
If issues persist after troubleshooting, contact Absolute USA customer support or a qualified technician.
Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | TW 600 |
| Speaker Type | Tweeter |
| Color | Black |
| Product Dimensions | 4"D x 4"W x 4"H |
| Item Weight | 3.2 ounces |
| Impedance | 2 Ohms |
| Is Waterproof | FALSE |
| Speaker Size | 1 Inches |
| Power Source | Corded Electric |
| Speaker Maximum Output Power | 600 Watts |
| Frequency Response | 100 Hz |
| Connectivity Technology | Speaker Wire |
| Audio Output Mode | Mono |
| UPC | 847169000966 |
| Manufacturer | Absolute USA |
Product Videos
No official product videos directly related to the Absolute TW-600 model were found from the seller. The available videos are for related products and not specific to this model.
Warranty and Support
For warranty details and customer support, please refer to the official Absolute USA website or contact your authorized dealer. Keep your proof of purchase for warranty claims.
Manufacturer: Absolute USA
Date First Available: November 15, 2010