Bayco SL-851 Professional Series Metal Shield Incandescent Utility Light Instruction Manual

1. Product Overview

The Bayco SL-851 Professional Series Metal Shield Incandescent Utility Light on 50 Foot Metal Reel is designed for robust and convenient illumination in various work environments. It features a heavy-duty metal retractable reel for easy cord management, a galvanized metal lamp shield with a rubber-tipped hang hook for versatile positioning, and a durable push on/off switch for simple operation. This unit is rated for use with up to a 75-watt incandescent bulb (bulb not included).

Figure 1: Bayco SL-851 Professional Series Metal Shield Incandescent Utility Light on 50 Foot Metal Reel.

2. Key Features

• Heavy Duty Metal Retractable Reel: Provides convenient storage and deployment of the 50-foot power cord.
• Galvanized Metal Lamp Shield with Rubber Tipped Hands-Free Hook: Protects the bulb and allows for easy hanging and positioning of the light.
• Mounting Brackets Included: Facilitates permanent installation on walls or ceilings.
• Durable Push On/Off Switch: Simple and reliable control of the light.
• Rated for Up to 75-Watt Incandescent Bulb: Supports standard incandescent bulbs (bulb not included).

3. Setup

1. Choose Mounting Location: Select a suitable wall or ceiling location for permanent installation. Ensure the surface can support the weight of the unit and that there is access to a power outlet.
2. Install Mounting Brackets: Use the included mounting brackets to securely attach the reel to the chosen surface. Refer to the diagram for proper orientation.
3. Insert Bulb: Ensure the unit is unplugged. Carefully screw an incandescent bulb (up to 75-watt) into the lamp socket. Do not overtighten.
4. Connect to Power: Plug the power cord into a standard 120-volt electrical outlet.

Figure 2: Example of the Bayco SL-851 Utility Light mounted for use.

4. Operating Instructions

1. Extend Cord: Gently pull the utility light away from the reel to extend the cord to the desired length. The reel will lock the cord in place at intervals.
2. Turn On/Off: Use the durable push on/off switch located on the handle of the utility light to control the illumination.
3. Retract Cord: To retract the cord, pull the utility light slightly further out until the locking mechanism disengages, then slowly guide the cord back into the reel. Do not release abruptly to prevent damage.
4. Use Hang Hook: Utilize the rubber-tipped hang hook on the lamp shield to suspend the light for hands-free operation.

5. Maintenance

• Cleaning: Disconnect from power before cleaning. Wipe the exterior of the reel and light with a dry or slightly damp cloth. Do not use abrasive cleaners or immerse in water.
• Bulb Replacement: Ensure the unit is unplugged and the bulb has cooled. Carefully unscrew the old bulb and replace it with a new incandescent bulb (up to 75-watt).
• Cord Inspection: Periodically inspect the power cord and light housing for any signs of damage, fraying, or wear. If damage is found, discontinue use and have it repaired by a qualified professional.

6. Troubleshooting

• Light Does Not Turn On:
  • Ensure the unit is securely plugged into a live 120-volt outlet.
  • Check the light bulb; it may need replacement.
  • Verify the on/off switch is fully engaged.
• Cord Does Not Retract:
  • Pull the cord slightly further out to disengage the locking mechanism, then slowly guide it back.
  • Ensure there are no kinks or obstructions in the cord.

7. Specifications

8. Warranty & Support

This Bayco SL-851 Utility Light comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any inquiries regarding your product, please contact BAYCO customer service through their official website or the retailer where the product was purchased. Please have your model number (SL-851) and proof of purchase ready when contacting support.

For more information, visit the BAYCO Store on Amazon.