Instruction Manual

1. Introduction

The Kingston Brass DR414182 Designer Trimscape Manhattan Decor Grab Bar is a durable and reliable fixture designed to provide support and stability. Fabricated from solid brass material, this 18-inch grab bar features a 1.25-inch outer diameter and a 1.25-inch gripping surface, meeting ADA standards with a 1.5-inch (38mm) wall clearance. It is intended for use in bathrooms or other areas where additional support is desired.

Figure 1: Kingston Brass DR414182 Grab Bar in Polished Brass finish. This image shows the full length of the grab bar with its polished surface and mounting flanges.

2. Setup and Installation

This grab bar is designed for easy installation. Mounting hardware is included to facilitate the process. For detailed step-by-step instructions, please refer to the official installation manual.

• Mounting Hardware: The product includes 2-inch x #8 Philips Head Screws (total 8 pieces) for secure wall mounting.
• Wall Clearance: Ensure a 1.5-inch (38mm) wall clearance is maintained to meet ADA standards.

Figure 2: Close-up view of the grab bar's mounting flange against a tiled wall. This image highlights the design of the mounting plate and its polished brass finish.

Figure 3: The 18-inch Kingston Brass grab bar installed horizontally on a textured tiled wall, demonstrating its appearance in a typical bathroom setting.

For comprehensive installation guidance, please download the official Installation Manual (PDF).

3. Operating Instructions

The Kingston Brass DR414182 Grab Bar is designed for passive operation, providing a secure handhold for balance and support. To use, simply grasp the bar firmly. Ensure the bar is securely mounted before applying weight.

• Intended Use: Provides stability and assistance when moving or standing, particularly in wet environments like bathrooms.
• Safety: Always test the stability of the grab bar by applying moderate pressure before full reliance.

4. Maintenance

To maintain the polished brass finish and ensure the longevity of your grab bar, follow these simple cleaning guidelines:

• Cleaning: Use a soft, damp cloth and a mild, non-abrasive soap.
• Avoid: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Regular Inspection: Periodically check the mounting screws for tightness to ensure the grab bar remains secure.

5. Troubleshooting

While the grab bar is a simple, robust product, here are some common issues and their solutions:

• Issue: Grab bar feels loose or wobbly.
  Solution: This indicates that the mounting screws may have loosened over time. Carefully re-tighten all mounting screws. If the issue persists, consult a professional for re-installation.
• Issue: Finish appears dull or tarnished.
  Solution: Ensure you are using only mild soap and a soft cloth for cleaning. For stubborn spots, a brass cleaner specifically designed for polished brass may be used, following the cleaner's instructions carefully.

6. Specifications

Key technical specifications for the Kingston Brass DR414182 Grab Bar:

Figure 4: Technical drawing illustrating the dimensions and specifications of the DR414182 grab bar, including its 18-inch length and 1-1/4 inch outer diameter.

7. Warranty Information

The Kingston Brass DR414182 Designer Trimscape Manhattan Decor Grab Bar is backed by a Five-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official Kingston Brass warranty documentation or contact customer support.

8. Support

For further assistance, technical support, or inquiries regarding your Kingston Brass product, please contact Kingston Brass customer service or visit their official website.

• Online Resources: Visit the official Kingston Brass Store for product information and support.
• Installation Manual: A downloadable PDF version of the installation manual is available here.