Introduction
The Revlon RVSP3503B Facial Sauna is designed to provide a complete two-step system for facial and nasal steaming. This device utilizes hot, soothing mist to help moisturize and soften skin, open pores for deep cleansing, and cleanse nasal passages with therapeutic steam. This manual provides essential information for the safe and effective use of your facial sauna.
Important Safety Information
Caution: For safe use, keep away from children. Do not leave unattended while in operation. Allow the device to cool down before handling or refilling the water tank. Be aware of potential risks associated with hot steam, such as burns or scalding.
- Always place the unit on a firm, level surface during use.
- Do not immerse the unit in water or other liquids.
- Unplug the unit from the electrical outlet when not in use and before cleaning.
- Do not operate the unit with a damaged cord or plug, or if it has malfunctioned or been dropped.
- Use only distilled water to prevent mineral buildup and ensure optimal performance.
- Keep your face at a comfortable distance from the steam outlet to avoid burns.
Product Components
The Revlon RVSP3503B Facial Sauna includes the following components:
- Main Steamer Unit
- Facial Cone (large)
- Nasal Cone (small)
- Measuring Cup
Image: The Revlon RVSP3503B Facial Sauna main unit, shown with the large facial cone attached, the smaller nasal cone, and the measuring cup. All components are pink and white.
Setup
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect the unit for any damage.
- Place on a Stable Surface: Position the main steamer unit on a firm, level, heat-resistant surface.
- Fill Water Reservoir: Remove the cone from the base. Use the provided measuring cup to fill the reservoir with distilled water. Do not overfill. The measuring cup typically has markings for different steaming durations.
- Attach Desired Cone: Securely place either the facial cone or the nasal cone onto the main unit, ensuring it is properly seated.
- Connect Power: Plug the power cord into a standard electrical outlet.
Image: The back of the Revlon Facial Sauna product box, illustrating the steps for filling the water reservoir and attaching the cones. Text on the box provides instructions in both English and French.
Operating Instructions
Facial Steaming
For a deep cleansing regimen and to moisturize and soften skin:
- Ensure the large facial cone is securely attached to the main unit.
- Press the power button to turn on the unit. The indicator light will illuminate.
- Allow a few minutes for the water to heat up and steam to begin producing.
- Once steam is ready, place your face over the facial cone at a comfortable distance. Keep your eyes closed.
- Breathe normally and relax. The steam will help open pores and moisturize your skin.
- The unit will continue to produce steam until the water reservoir is empty. The duration depends on the amount of water added (e.g., 10-15 minutes for a full reservoir).
- After use, press the power button to turn off the unit and unplug it from the outlet.
Nasal Steaming
To help cleanse nasal passages with relaxing, therapeutic steam:
- Ensure the small nasal cone is securely attached to the main unit.
- Press the power button to turn on the unit.
- Allow a few minutes for steam to begin producing.
- Once steam is ready, place your nose and mouth over the nasal cone at a comfortable distance.
- Breathe deeply to inhale the therapeutic steam.
- The unit will continue to produce steam until the water reservoir is empty.
- After use, press the power button to turn off the unit and unplug it from the outlet.
Image: The Revlon RVSP3503B Facial Sauna, displaying both the large facial cone and the smaller nasal cone, ready for attachment to the main unit.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your facial sauna.
- Always Unplug: Before cleaning, ensure the unit is turned off, unplugged, and completely cooled down.
- Empty Water: Carefully empty any remaining water from the reservoir.
- Clean Reservoir: Wipe the inside of the water reservoir with a soft, damp cloth. For mineral buildup, a solution of equal parts white vinegar and water can be used. Let it sit for 10-15 minutes, then rinse thoroughly with clean water.
- Clean Cones: Wash the facial and nasal cones with mild soap and warm water. Rinse thoroughly and allow them to air dry completely before reattaching or storing.
- Exterior Cleaning: Wipe the exterior of the main unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: Store the unit in a cool, dry place, away from direct sunlight and moisture.
Troubleshooting
If you encounter issues with your Revlon RVSP3503B Facial Sauna, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or very little steam. |
|
|
| Steam smells burnt. | Water reservoir is empty. | Turn off the unit immediately, unplug it, and allow it to cool. Refill with distilled water. Monitor water levels during use. |
| Unit does not turn off automatically. | This model does not feature an automatic shut-off when water runs out. | Manually turn off the unit by pressing the power button and unplugging it after each use or when the water runs out. |
Specifications
- Model Number: RVSP3503B
- Brand: REVLON
- Power Source: Corded Electric
- Product Dimensions (L x W x H): 19.1 x 19.1 x 24.1 Centimetres
- Item Weight: 453.59 g
- Benefits: Cleansing, Nasal Relief, Pores, Relaxing, Restoring, Softening, Soothing
Warranty and Support
Specific warranty details for the Revlon RVSP3503B Facial Sauna are not provided in this manual. For warranty information, product support, or service inquiries, please refer to the product packaging or contact Revlon customer service directly. Contact information can typically be found on the manufacturer's official website or on the product's retail packaging.
You may visit the official REVLON Store on Amazon for more information.