Dixon 49400 Industrial Lumber Crayon User Manual

Introduction

Thank you for choosing Dixon Industrial Lumber Crayons. This manual provides essential information for the proper use, care, and maintenance of your Dixon 49400 Carbon Black Industrial Lumber Crayons. Designed for durability and performance, these crayons are ideal for marking various surfaces in industrial and construction environments.

Product Features

• Extruded lumber crayons designed to last significantly longer than traditional molded wax crayons.
• Formulated to be fade-proof, ensuring marks remain visible over time.
• Water-proof properties allow for marking on wet surfaces without smearing or washing away.
• Smear-proof composition prevents accidental smudging of marks.
• Resistant to melting in direct sunlight, maintaining integrity in various weather conditions.
• Effective on a wide range of surfaces including wet (green) lumber, dry wood, metal, and concrete.
• Hexagonal shape (4-1/2" x 1/2") designed to fit standard lumber crayon holders for comfortable and secure use.

Image: A box containing 12 Dixon 49400 Carbon Black Industrial Lumber Crayons. The packaging highlights "Carbon Black" and "Lumber Crayons" in multiple languages, along with the model number 49400.

Setup

1. Unpackaging: Carefully remove the Dixon 49400 Industrial Lumber Crayons from their packaging.
2. Crayon Holder (Optional but Recommended): For extended use and improved grip, insert the hexagonal crayon into a compatible lumber crayon holder. Ensure the crayon is securely seated in the holder.
3. Surface Preparation: While these crayons work on various surfaces, ensure the marking area is free from excessive loose debris or thick mud for optimal visibility and adhesion.

Operating Instructions

The Dixon 49400 Industrial Lumber Crayon is designed for straightforward marking.

1. Grip: Hold the crayon firmly, either directly or within a crayon holder.
2. Application: Apply moderate pressure to the crayon tip against the desired surface.
3. Marking: Draw or write as needed. The crayon will leave a clear, carbon black mark.
4. Suitable Surfaces: These crayons are effective on:
   • Wet (green) lumber
   • Dry wood
   • Metal surfaces
   • Concrete
   • Most other construction and industrial surfaces

Maintenance

• Storage: Store crayons in a cool, dry place away from extreme heat. While resistant to melting in direct sunlight, prolonged exposure to very high temperatures can affect crayon consistency.
• Cleaning: No specific cleaning is required for the crayon itself. If using a crayon holder, clean it periodically to remove any accumulated debris.
• Sharpening: If a finer point is desired, the crayon can be carefully sharpened using a utility knife or a specialized crayon sharpener. Exercise caution when sharpening.

Troubleshooting

• Faint Marks: If marks appear faint, ensure sufficient pressure is applied. Check the surface for excessive dust, oil, or moisture that might hinder adhesion.
• Crayon Breakage: Excessive force during marking or dropping the crayon can lead to breakage. Use moderate pressure and handle with care.
• Difficulty Marking Rough Surfaces: For very rough or uneven surfaces, multiple passes or increased pressure may be required to achieve a clear mark.

Specifications

Safety Information

• Keep out of reach of small children to prevent accidental ingestion.
• Do not use for purposes other than marking surfaces as intended.
• Avoid contact with eyes. In case of contact, rinse thoroughly with water.
• Dispose of used crayons responsibly according to local regulations.

Warranty and Support

Dixon products are manufactured to high-quality standards. For specific warranty information or customer support regarding your Dixon 49400 Industrial Lumber Crayons, please refer to the official Dixon website or contact their customer service department.

Manufacturer: Dixon Ticonderoga