WIX Filter Mounting Base 24960 Instruction Manual

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your WIX Filter Mounting Base, model 24960. Please read these instructions carefully before installation to ensure safe and effective use.

Image 1: WIX Filter Mounting Base 24960. This image shows the black, cast metal filter mounting base with a central threaded post for filter attachment and two threaded ports for fluid lines.

Safety Information

Always follow standard automotive safety procedures when working with vehicle components. Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves. Ensure the vehicle is securely supported and the engine is off and cool before beginning any work.

• Disconnect the vehicle's battery before installation to prevent electrical hazards.
• Handle all fluids with care and dispose of them responsibly.
• Ensure all connections are tight and secure to prevent leaks.
• Consult a qualified mechanic if you are unsure about any installation steps.

Setup and Installation

The WIX Filter Mounting Base 24960 is designed for vehicle-specific fitment. Proper installation is crucial for optimal performance and safety.

1. Preparation: Ensure you have all necessary tools and replacement parts, including the WIX Filter Mounting Base 24960, a compatible filter, and any required gaskets or seals.
2. Locate Mounting Position: Identify the designated mounting location on your vehicle. This base is typically used for remote filter applications.
3. Secure the Base: Mount the filter base securely to a stable surface using appropriate fasteners (not included). Ensure the mounting surface is clean and flat.
4. Connect Fluid Lines: Connect the inlet and outlet fluid lines to the threaded ports on the base. Use thread sealant or tape as recommended for your specific application to prevent leaks. Ensure connections are tightened to manufacturer specifications.
5. Install Filter: Apply a thin film of clean oil to the gasket of the new filter. Thread the filter onto the central threaded post of the mounting base. Hand-tighten until the gasket contacts the base, then tighten an additional 3/4 to 1 full turn, or as specified by the filter manufacturer.
6. System Priming: After installation, prime the system according to your vehicle's service manual to ensure proper fluid circulation before starting the engine.
7. Leak Check: Start the engine and carefully check for any leaks around the filter base and connections. Address any leaks immediately.

Operation

Once installed, the WIX Filter Mounting Base 24960 operates as a passive component, providing a secure and leak-free interface for your automotive filter. Its function is to hold the filter in place and direct fluid flow through it. No direct user operation is required beyond initial installation and routine maintenance.

Maintenance

Regular maintenance primarily involves replacing the filter attached to the base according to your vehicle manufacturer's recommendations or the filter manufacturer's guidelines.

1. Filter Replacement:
   • Ensure the engine is off and cool.
   • Place a drain pan beneath the filter to catch any fluid.
   • Unscrew the old filter counter-clockwise.
   • Clean the filter mounting surface on the base.
   • Install a new, compatible filter as described in the "Setup and Installation" section.
   • Check for leaks after starting the engine.
2. Base Inspection: Periodically inspect the filter mounting base for any signs of damage, corrosion, or leaks. Ensure all connections remain tight.

Troubleshooting

If troubleshooting steps do not resolve the issue, consult a professional mechanic.

Specifications

• Brand: Wix
• Model: 24960
• Product Type: Auto Part, Filter Mounting Base
• Outer Material: Plastic (as per product specifications)
• Vehicle Service Type: Passenger Car, SUV, Truck, Van
• Item Weight: Approximately 2.33 pounds (1.06 kg)
• Product Dimensions: Approximately 4.8 x 4.5 x 3.6 inches (12.2 x 11.4 x 9.1 cm)
• Fit Type: Vehicle Specific Fit
• UPC: 765809249608

Warranty Information

Specific warranty details for WIX products are typically provided with the product packaging or can be found on the official WIX Filters website. Please retain your proof of purchase for any warranty claims.

Customer Support

For technical assistance, product inquiries, or support, please refer to the official WIX Filters website or contact their customer service department. Contact information is usually available on the product packaging or their official website.

Note: This manual is for informational purposes only. Always refer to your vehicle's service manual and consult a qualified professional for specific installation and maintenance procedures.