Aiphone DA-2DS

Aiphone 2-Call DA Series Door Station

Model: DA-2DS Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aiphone 2-Call DA Series Door Station, model DA-2DS. Please read this manual thoroughly before attempting to install or operate the unit to ensure correct usage and to prevent damage.

Aiphone DA-2DS 2-Call Door Station

Image: Front view of the Aiphone DA-2DS 2-Call Door Station. This silver unit features two call buttons for multi-tenant or multi-location communication.

Safety Information

Observe the following safety precautions to prevent injury and damage to the equipment:

Package Contents

Verify that all items are present in the package:

Setup

Mounting

Select a suitable mounting location, typically near the entrance, at a height that allows easy access for all users. Ensure the surface is flat and secure. Use the provided mounting screws and anchors to firmly attach the door station to the wall.

Wiring

Connect the door station to the indoor master station using appropriate wiring. The DA-2DS requires a 2-wire connection for each call button to the corresponding indoor station. Refer to the wiring diagram provided with your indoor master station for specific connection points. Ensure all connections are secure and insulated.

Initial Power-Up

After all wiring is complete and verified, apply power to the system. Test each call button to ensure proper communication with the indoor stations.

Operating Instructions

Making a Call

To initiate a call from the door station, press the desired call button. This will activate the corresponding indoor master station, which will then ring to alert the occupant.

Answering a Call

When a call is initiated from the door station, the indoor master station will ring. The occupant can answer the call by pressing the talk button on the indoor station. Two-way communication will then be established.

Maintenance

Cleaning

Clean the exterior of the door station periodically with a soft, damp cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish and internal components.

Regular Checks

Periodically check the mounting screws for tightness and ensure all wiring connections remain secure. Test the call buttons and communication functionality regularly to ensure proper operation.

Troubleshooting

ProblemPossible CauseSolution
No sound from door stationLoose wiring connection; faulty speaker/microphoneCheck wiring connections at both door and master stations. If problem persists, contact support.
Call button does not activate indoor stationIncorrect wiring; faulty buttonVerify wiring connections for the specific call button. Test button functionality.
Interference or poor audio qualityImproper wiring; electrical interferenceEnsure wiring is correctly installed and shielded if necessary. Check for nearby sources of electrical interference.

Specifications

Warranty Information

Aiphone products are designed for reliability and performance. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Aiphone website. Keep your proof of purchase for warranty claims.

Support

For technical assistance, troubleshooting, or service inquiries, please contact Aiphone customer support. You can find contact information, including phone numbers and online resources, on the official Aiphone website. When contacting support, please have your model number (DA-2DS) and a description of the issue ready.

Related Documents - DA-2DS

PreviewAiphone JOW-2D Two Door Adaptor for JO Series Video Intercom System - Installation Guide
Detailed instructions and specifications for the Aiphone JOW-2D adaptor, enabling two door stations for the JO Series video intercom system. Learn about wiring, power, and operational features for intercom installations.
PreviewAiphone IC-1AD(U) Chime Tone Intercom System: Installation and Operation Guide
Comprehensive guide for the Aiphone IC-1AD(U) 1-door, 1-room chime tone intercom system, covering features, specifications, installation, wiring, operation, and warranty.
PreviewAiphone IX-DVM Video Door Station Installation Manual
Detailed installation manual for the Aiphone IX-DVM Video Door Station, covering setup, wiring, precautions, and system configuration. Includes part names, accessories, and connection guides.
PreviewAiphone GF-1DKS / GF-1MDKS Tenant Station with Extra Switch Contact - Instructions & Specifications
Detailed instructions and specifications for the Aiphone GF-1DKS and GF-1MDKS tenant stations, including wiring diagrams and contact ratings. Learn about their features for concierge, panic call, and door release functions.
PreviewAiphone GT-1C Tenant Station Operation Guide
Comprehensive operation guide for the Aiphone GT-1C Tenant Station. Learn about its power source, LCD screen, speaker, microphone, and the functions of buttons like Door Release, Option, Guard, Talk, and Off, along with side controls for brightness, volume, and zoom.
PreviewAiphone MY-1AD 2-Wire Video Entry Security System Instructions
Comprehensive instructions and specifications for the Aiphone MY-1AD 2-Wire Video Entry Security System, covering installation, operation, and system components.