Alera Elusion Series Mesh Mid-Back Multifunction Chair ALEEL42ME10B User Manual

1. Important Safety Information

• Do not use this chair on uneven or slippery surfaces to prevent accidents.
• The maximum weight capacity for this chair is 275 pounds (125 kg). Do not exceed this limit.
• Keep fingers and clothing clear of all moving parts and adjustment mechanisms to avoid injury.
• Regularly inspect all fasteners and connections to ensure they are tight and secure. Retighten as necessary.
• Use the chair only for its intended purpose as an office chair.

2. Product Overview

The Alera Elusion Series Mesh Mid-Back Multifunction Chair is designed for ergonomic comfort and adjustability, suitable for extended periods of use in home or professional office environments. It features a breathable mesh back, a contoured seat cushion, and multiple adjustment options to customize your seating experience.

Figure 1: Front view of the Alera Elusion Series Mesh Mid-Back Multifunction Chair.

Figure 2: Chair dimensions, showing height, width, and depth.

3. Setup and Assembly

Assembly of the Alera Elusion Series chair is designed to be straightforward. All necessary tools, typically Allen keys, are included. A Phillips head screwdriver may also be required for some steps.

3.1 Pre-Assembly Checklist

• Unpack all components and verify against the parts list provided in your packaging.
• Ensure all screws, washers, and small parts are accounted for before beginning.
• Clear a spacious area for assembly to prevent damage to the chair or your surroundings.

3.2 Assembly Tips

• Pay close attention to the orientation of parts, especially the steel back support, which may have an 'outward' stamp.
• When attaching the back to the seat, some users find it easier to place the seat upright on the pneumatic cylinder rather than inverted.
• Ensure correct stacking sequence of flat washers and lock washers as indicated in the pictorial instructions.
• Tighten all bolts securely but avoid over-tightening.

4. Operating Instructions (Adjustments)

The Alera Elusion Series chair offers extensive adjustability to provide personalized comfort and support. Familiarize yourself with the various levers and knobs located beneath the seat.

4.1 Seat Height Adjustment

To adjust the seat height, locate the lever on the right side beneath the seat. Lift the lever to raise the seat, or lift the lever while seated to lower the seat to your desired height. Release the lever to lock the position.

4.2 Seat Glide Mechanism

The seat glide mechanism allows you to adjust the seat depth relative to the backrest. This helps ensure proper leg support and reduces pressure on the thighs. Consult your chair's specific instructions for the lever controlling this feature.

4.3 Adjustable Seat Tilt

The chair features an adjustable tilt mechanism, allowing for free-floating movement or infinite locking positions. This enables you to recline and lock the chair at your preferred angle for comfort.

Figure 3: View of the various levers and knobs for chair adjustments, including seat height, tilt, and back angle.

4.4 Adjustable Chair Back Tilt

The backrest angle can be adjusted independently or in conjunction with the seat tilt. This allows you to find the optimal back support for your posture.

4.5 Armrest Adjustments

The armrests are both height- and width-adjustable, featuring soft polyurethane pads for comfort. Adjust them to support your arms and shoulders, reducing strain during work.

Figure 4: Detail of the height-adjustable armrest with soft polyurethane pad.

4.6 Tilt Tension Control

A knob beneath the seat controls the tilt tension, allowing you to adjust the resistance of the chair's recline to match your body weight and preference.

Figure 5: The tilt tension knob, used to adjust the recline resistance of the chair.

5. Maintenance

Proper maintenance ensures the longevity and continued performance of your Alera Elusion Series chair.

5.1 Cleaning

• For general cleaning, wipe the chair with a clean, damp cloth.
• For fabric and mesh surfaces, use a mild soap solution and a soft brush if necessary, then wipe clean with a damp cloth and allow to air dry. Avoid harsh chemicals.

5.2 Inspection

• Periodically check all screws and bolts for tightness. Retighten any loose fasteners to maintain stability and safety.
• Inspect casters for any debris (e.g., hair, lint) that might impede smooth rolling. Clean as needed.

6. Troubleshooting

If you encounter any issues with your chair, refer to the following common troubleshooting tips:

6.1 Chair is Creaking

• Creaking noises often indicate loose fasteners. Inspect all bolts and screws, especially those connecting the seat and backrest, and tighten them.
• A small amount of silicone-based lubricant can be applied to moving metal parts if tightening does not resolve the issue.

6.2 Casters Not Rolling Smoothly

• Check the casters for any accumulated debris such as hair or carpet fibers. Remove any obstructions.
• On low-pile carpets, casters may not roll as freely as on hard surfaces. Consider using a chair mat for improved mobility.

6.3 Difficulty Adjusting Chair Components

• Ensure you are using the correct lever or knob for the desired adjustment. Refer to the operating instructions.
• Some adjustments, like armrest width, may require you to temporarily shift your weight or position to access and operate the controls effectively.

7. Specifications

8. Warranty and Support

The Alera Elusion Series Mesh Mid-Back Multifunction Chair comes with a manufacturer's limited 5-year warranty, ensuring quality and durability.

8.1 Contact Support

For questions regarding assembly, warranty claims, or any other support needs, please contact Alera customer service:

• Phone: 1-800-733-4000

Please have your model number (ALEEL42ME10B) and purchase information ready when contacting support.