Introduction and Overview
The PetSafe Happy Ride Quilted Dog Safety Seat is designed to provide a secure and comfortable elevated space for your dog during car travel. This booster seat helps reduce pet anxiety and allows your dog to enjoy the view, contributing to a safer and more pleasant journey for both pet and owner. It is suitable for small and medium dogs weighing up to 30 pounds.
Figure 1: Dog comfortably seated in the PetSafe Happy Ride Quilted Dog Safety Seat.
Setup and Installation
Follow these steps to properly set up and install your PetSafe Happy Ride Quilted Dog Safety Seat:
- Unpack Components: Remove all parts from the packaging. The seat consists of a sturdy plastic frame, a quilted liner, and a padded cushion.
- Assemble Frame (if necessary): The plastic frame is designed for easy assembly. Ensure all parts snap securely into place to form the rigid structure of the booster seat.
- Install Quilted Liner and Cushion: Place the quilted liner over the plastic frame. The liner is designed to fit snugly. Insert the padded cushion into the bottom of the seat. The cushion is reversible, allowing you to choose the side your dog prefers.
- Secure in Vehicle: Position the booster seat on your vehicle's passenger seat or rear seat. Thread your vehicle's seat belt through the designated slots on the back and bottom of the booster seat. Fasten the seat belt securely, ensuring the booster seat is firmly anchored and does not shift during travel.
- Attach Safety Tether: The booster seat includes a safety tether. Attach this tether to your dog's crash-tested safety harness (sold separately). This provides an additional layer of security, preventing your dog from moving freely around the vehicle.
Figure 2: Underside view of the seat, illustrating the sturdy frame and seat belt path.
Video 1: Demonstration of the PetSafe Happy Ride Quilted Dog Safety Seat's features and benefits, including its design for comfort and security in vehicles.
Operating Instructions
Once installed, the PetSafe Happy Ride Quilted Dog Safety Seat provides a safe and elevated position for your dog. The 9-inch high raised platform allows your dog to see out the window, which can help alleviate motion sickness and enhance their travel experience. Always ensure your dog is wearing a crash-tested harness and is securely attached to the seat's tether before driving. This prevents your pet from becoming a distraction and protects them in case of sudden stops or impacts.
Figure 3: The booster seat provides a comfy space for adventures, fitting most vehicles.
Figure 4: The 9-inch raised platform allows pets to see out the window, enhancing comfort.
Maintenance
Proper maintenance ensures the longevity and hygiene of your dog safety seat.
- Removable Cover: The quilted liner and cushion cover are machine washable. Remove them from the plastic frame before washing. Use a gentle cycle with cold water and mild detergent. Air dry or tumble dry on low heat.
- Plastic Frame: The plastic frame should be hand washed only. Wipe down with a damp cloth and mild soap as needed. Ensure it is completely dry before reassembling the fabric components.
Figure 5: The removable quilted liner and cushion facilitate easy cleaning.
Troubleshooting
If you encounter any issues with your PetSafe Happy Ride Quilted Dog Safety Seat, please review the following common concerns:
- Seat feels unstable: Ensure the vehicle's seat belt is threaded correctly through all designated slots and is pulled taut and securely fastened. The seat should not wobble or slide.
- Dog not comfortable: Check that the cushion is properly placed and that your dog's harness is not too tight or restrictive. Some dogs may need time to adjust to a new car seat.
- Tether not reaching harness: Adjust the length of the tether if possible, or ensure your dog's harness has an appropriate attachment point that aligns with the tether's reach.
If problems persist, please refer to the Warranty and Support section for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 62350 |
| Product Dimensions | 22"L x 17"W x 22"H |
| Item Weight | 7 Pounds |
| Maximum Weight Recommendation | 30 Pounds |
| Material | Micro-Suede |
| Color | Quilted Tan |
| Product Care Instructions | Hand Wash Only (Frame), Machine Washable (Cover) |
| Included Components | Jumbo Seat and Tether |
Figure 6: Key dimensions and safety features of the booster seat.
Warranty and Support
The PetSafe Happy Ride Quilted Dog Safety Seat comes with a Lifetime Warranty, reflecting our commitment to quality and durability.
For product support, questions, or warranty claims, please contact PetSafe Customer Service. Contact information can typically be found on the official PetSafe website or product packaging.
